Instead of a new attribute `@completionHandlerAsync`, allow the use of
the existing `renamed` parameter of `@available` to specify the
asynchronous alternative of a synchronous function.
No errors will be output from invalid names as `@completionHandlerAsync`
had, but if a function is correctly matched then it will be used to
output warnings when using the synchronous function in an asynchronous
context (as before).
Resolves rdar://80612731
Give BuiltinProtocolConformance a generic signature, which can be used to
describe the generic parameters used within the builtin conformance, e.g.,
`<T1, T2, T3>` for a tuple type `(T1, T2, T3)`. Also store the
conditional requirements as trailing objects, requiring them to be
precomputed by whatever builds the conformances. Together, this means
that builtin protocol conformances act like normal conformances with
respect to conditional requirements and substitutions: they will be
defined generically, then a specialized conformance will be layered on
top to provide the substitutions.
Parse and provide semantic checking for '@unchecked Sendable', for a
Sendable conformance that doesn't perform additional semantic checks
for correctness.
Part of rdar://78269000.
This is just a shortcut for @_semantics("optremark") to make it easier for
people to remember how to enable assembly vision remarks.
Now one can just type:
```
@_assemblyVision
func foo() {
...
}
```
and get all normal opt-remarks + assembly vision remarks.
If the `-static` option is specified, store that in the generated
swiftmodule file. When de-serializing, recover this information in the
representative SILModule.
This will be used for code generation on Windows. It is the missing
piece to allow static linking to function properly. It additionally
opens the path to additional optimization on ELF-ish targets - GOT, PLT
references can be avoided when the linked module is known to be static.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
This allows library authors to pass down a project version number so that library users can conditionally
import that library based on the available version in the search paths.
Needed for rdar://73992299
Mark imported `@completionHandlerAsync` attrs as
implicit, which avoids printing them in generated
interfaces. And for the sake of completion,
serialize the implicit bit in case it's used
elsewhere in the future.
To make sure we continue to print
`@completionHandlerAsync` attributes explicitly
written by the user in Swift, add a SourceKit
interface test.
Resolves rdar://76685011
Since 865e80f9c4 we are keeping track of internal closure labels in the closure’s type. With this change, wer are also serializing them to the swiftmodules.
Furthermore, this change adjusts the printing behaviour to print the parameter labels in the swiftinterfaces.
Resolves rdar://63633158
This will enable users to try out the '-enable-ossa-modules' flag if their
compiler supports it and get OSSA code on all inlinable code that they use. The
idea is that this is a nice way to stage this in and get more testing.
The specific implementation is that the module interface loader:
1. Knows if enable ossa modules is enabled not to search for any compiled
modules. We always rebuild from the interface file on the system.
2. Knows that if enable ossa modules is enabled to mixin a bit into the module
interface loader cache hash to ensure that we consider the specialized ossa
compiled modules to be different than the modules in that cache from the system.
This ensures that when said flag is enabled, the user transparently gets all
their code in OSSA form from transparent libraries.
Introduce the notion of global actor-qualified function types, e.g.,
@MainActor () -> Void
to describe synchronous functions that must execute on a particular
global actor.
Assuming that we don't typecheck a deserialized module, we don't
actually need the ExplicitCompletionHandlerIndex. We used this flag to
determine whether we could trust the number stored in the handler index
or just take the last parameter of the function we're attached to.
Since we only typecheck it before serialization, we can safely check
that the completion handler location is valid before choosing whether we
should trust it or not.
We can get the DeclName of the async function from the resolved function
decl itself, so we don't actually need to serialize it. This patch pulls
the declNameRef from the serialization.
This patch replaces the @hasAsyncAlternative attribute with
@completionHandlerAsync. The @completionHandlerAsync attribute takes the
function decl name of the async function and optionally the index of the
completion hander parameter in the function that it's attached to.
If the completion handler index is not provided, it's assumed to be the
last parameter in the parameter list.
We resolve the async function while typechecking the attribute. Before
resolving, we verify that the function the attribute is attached to
isn't async, that it has enough parameters to at least have the
indicated completion handler referenced by the index, that the
completion handler is an escaping non-auto-closure function that returns
Void.
The async function declaration resolution isn't perfect yet, but I want
to get this patch up and we can refine it later. It pulls all of the
delcs with the specified declname in the same context as the
function that the attribute is attached to. Going through that list, it
keeps any that are async functions. If there are none, we emit an error
saying that there are no viable functions, if there are multiple we emit
an error saying that the decl name is ambiguous, and if there is one
function, we keep that as the resolve async function declaration.
This does not take into account the data types of the completion handler
or the async function. There are some complexities to making this
mapping. Here are the pieces:
- If the completion handler takes a single data type, the async
function should return that type. (easy case)
- If the completion handler takes a `Result<T, Error>`, the async
function is a throwing function that returns a T. (Medium difficulty)
- If the completion handler looks like `(T?, Error?) -> Void`, we have
an ambiguous situation between the following async functions:
- func foo() async throws -> T
- func foo() async throws -> T?
That is, we cannot tell whether the `T?` in the completion handler is
optional because it will be nil on an error, or if it is intended to
be optional.
This can be done later if it becomes a problem.
Introduce a new compiler flag `-module-abi-name <name>` that uses the
given name as the ABI name for the module (rather than the module's
name in source code). The ABI name impacts name mangling and metadata.
Refactor SILGen's ApplyOptions into an OptionSet, add a
DoesNotAwait flag to go with DoesNotThrow, and sink it
all down into SILInstruction.h.
Then, replace the isNonThrowing() flag in ApplyInst and
BeginApplyInst with getApplyOptions(), and plumb it
through to TryApplyInst as well.
Set the flag when SILGen emits a sync call to a reasync
function.
When set, this disables the SIL verifier check against
calling async functions from sync functions.
Finally, this allows us to add end-to-end tests for
rdar://problem/71098795.
47b068d445 output a diagnostic if a
deserialized decl was invalid (checking `Decl::isInvalid`). It had two
major issues:
1. It incorrectly output diagnostics for valid modules
2. It did not catch call invalid declarations
(1) is caused by `isInvalid` falling back to checking the storage for
accessors when the interface type hasn't already been computed (a
fallback to prevent a cycle due to `SimpleDidSetRequest` typechecking
the body). Since the `VarDecl` hasn't finished deserializing, it returns
`true` for its `isInvalid` check (even though it would later return
`false`).
For (2), only `ValueDecl`s would ever be invalid, since other
declarations use a bit in `Decl` to check for validity. As that's not
serialized, those would always be valid in deserialization.
To avoid both these issues, instead output a flag for each declaration
representing whether it is invalid (or not). Read that during
deserialization and output a diagnostic if it is invalid. To be extra
sure that a diagnostic is always output on an error, also output one
when deserializing any `ErrorType`. This ensures that SILGen does not
run when allowing errors (and an error is present), as it is likely to
crash when presented with an invalid AST.
Resolves rdar://74541834
Allow us to tag declarations that are meant to be in a global actor, but
for which we don't yet want to enforce everything. This will be used for
better staging-in of global actor annotations, but for now it's a fancy
way to document @actorIndependent(unsafe).
Stages in the syntax for rdar://74241687 without really implementing it.
This attribute marks a function has having an async alternative,
optionally providing the name of that function as a string. Intended to
be used to allow warnings when using a function with an async
alternative in an asynchronous context, to make the async refactorings
more accurate, and for documentation.
When the requisite support in Clang for `__attribute__((swift_async_error))` parameters
lands, this will let us represent APIs that take completion handlers in the general shape
of `void (^)(BOOL, id, NSError*)`, where the boolean argument indicates the presence of
an error rather than the nilness of the `NSError*` argument.
This patch softly updates the spelling of actors from `actor class` to
`actor`. We still accept using `actor` as a modifying attribute of
class, but emit a warning and fix-it to make the change.
One of the challenges that makes this messier is that the modifier list
can be in any order. e.g, `public actor class Foo {}` is the same as
`actor public class Foo {}`.
Classes have been updated to include whether they were explicitly
declared as an actor. This change updates the swiftmodule serialization
version number to 0.591. The additional bit only gets set of the class
declaration was declared as an actor, not if the actor was applied as an
attribute. This allows us to correctly emit `actor class` vs `actor`
emitting the code back out.
Compiler:
- Add `Forward` and `Reverse` to `DifferentiabilityKind`.
- Expand `DifferentiabilityMask` in `ExtInfo` to 3 bits so that it now holds all 4 cases of `DifferentiabilityKind`.
- Parse `@differentiable(reverse)` and `@differentiable(_forward)` declaration attributes and type attributes.
- Emit a warning for `@differentiable` without `reverse`.
- Emit an error for `@differentiable(_forward)`.
- Rename `@differentiable(linear)` to `@differentiable(_linear)`.
- Make `@differentiable(reverse)` type lowering go through today's `@differentiable` code path. We will specialize it to reverse-mode in a follow-up patch.
ABI:
- Add `Forward` and `Reverse` to `FunctionMetadataDifferentiabilityKind`.
- Extend `TargetFunctionTypeFlags` by 1 bit to store the highest bit of differentiability kind (linear). Note that there is a 2-bit gap in `DifferentiabilityMask` which is reserved for `AsyncMask` and `ConcurrentMask`; `AsyncMask` is ABI-stable so we cannot change that.
_Differentiation module:
- Replace all occurrences of `@differentiable` with `@differentiable(reverse)`.
- Delete `_transpose(of:)`.
Resolves rdar://69980056.
Add @concurrent to SIL function types, mirroring what's available on
AST function types. @concurrent function types will have by-value
capture semantics.
Introduce `@concurrent` attribute on function types, including:
* Parsing as a type attribute
* (De-/re-/)mangling for concurrent function types
* Implicit conversion from @concurrent to non-@concurrent
- (De-)serialization for concurrent function types
- AST printing and dumping support
`differentiability_function_extract` instruction has an optional explicit
extractee type. This is currently used by TypeSubstCloner and the
LoadableByAddress transform to rewrite `differentiability_function_extract`
instructions while preserving `@differentiable` function type invariants.
There is an assertion that `differentiability_function_extract` instructions do
not have explicit extractee types outside of canonical/lowered SIL. However,
this does not handle the SIL deserialization case above: when a function
containing a `differentiable_function_extract` instruction with an explicit type
is deserialized into a raw SIL module (which happens when optimizations are
enabled).
Removing the assertion unblocks this encountered use case.
A more robust longer-term solution may be to change SIL `@differentiable`
function types to explicitly store component original/JVP/VJP function types.
Also fix `differentiable_function_extract` extractee type serialization.
Resolves SR-14004.
