Currently when function types like `(_: Int...) -> Void` are mangled
their names are going to include enclosing sugar BoundGenericType(Array),
which is not necessary and doesn’t play well with `AnyFunctionType::Param`
which strips the sugar away.
Resolves: rdar://problem/34941557
introduce a common superclass, SILNode.
This is in preparation for allowing instructions to have multiple
results. It is also a somewhat more elegant representation for
instructions that have zero results. Instructions that are known
to have exactly one result inherit from a class, SingleValueInstruction,
that subclasses both ValueBase and SILInstruction. Some care must be
taken when working with SILNode pointers and testing for equality;
please see the comment on SILNode for more information.
A number of SIL passes needed to be updated in order to handle this
new distinction between SIL values and SIL instructions.
Note that the SIL parser is now stricter about not trying to assign
a result value from an instruction (like 'return' or 'strong_retain')
that does not produce any.
Consider a class hierarchy like the following:
class Base {
func m1() {}
func m2() {}
}
class Derived : Base {
override func m2() {}
func m3() {}
}
The SIL vtable for 'Derived' now records that the entry for m1
is inherited, the entry for m2 is an override, and the entry
for m3 is a new entry:
sil_vtable Derived {
#Base.m1!1: (Base) -> () -> () : _T01a4BaseC2m1yyF [inherited]
#Base.m2!1: (Base) -> () -> () : _T01a7DerivedC2m2yyF [override]
#Derived.m3!1: (Derived) -> () -> () : _T01a7DerivedC2m3yyF
}
This additional information will allow IRGen to emit the vtable
for Derived resiliently, without referencing the symbol for
the inherited method m1() directly.
This has the same semantics as open_existential_box, but returns an object value
instead of an address.
This is used in SIL opaque values mode. Attempting to reuse open_existential_box
in this mode causes SIL type inconsistencies that are too difficult to work
around. Adding this instruction allows for consistent handling of opaque values.
The original versions of several of these currently redundant instructions will
be removed once the SIL representation stabilizes.
These instructions have the same semantics as the *ExistentialAddr instructions
but operate directly on the existential value, not its address.
This is in preparation for adding ExistentialBoxValue instructions.
The previous name would cause impossible confusion with "opaque existentials"
and "opaque existential boxes".
At some point, pass definitions were heavily macro-ized. Pass
descriptive names were added in two places. This is not only redundant
but a source of confusion. You could waste a lot of time grepping for
the wrong string. I removed all the getName() overrides which, at
around 90 passes, was a fairly significant amount of code bloat.
Any pass that we want to be able to invoke by name from a tool
(sil-opt) or pipeline plan *should* have unique type name, enum value,
commend-line string, and name string. I removed a comment about the
various inliner passes that contradicted that.
Side note: We should be consistent with the policy that a pass is
identified by its type. We have a couple passes, LICM and CSE, which
currently violate that convention.
Also, add a third [serializable] state for functions whose bodies we
*can* serialize, but only do so if they're referenced from another
serialized function.
This will be used for bodies synthesized for imported definitions,
such as init(rawValue:), etc, and various thunks, but for now this
change is NFC.
It turned out that a significant part of a swiftmodule’s size is contributed by function declarations and types used by them. Therefore it is important to avoid emitting any functions or function declarations that are not needed by the module.
This change introduces the following changes:
- Function declarations should be serialized only if they are referenced by something that is serialized.
- Function bodies of functions with external linkage should never be serialized.
The only exception are shared_external functions. THis is a workaround, which will be removed in the future (see explanations in SILSerializer::writeSILFunction)
The result of the later change is that functions with external linkage are not put on the SIL serialization worklist and their bodies are not scanned, thus we do not detect references to the functions which are only referenced by functions with external linkage. In particular, the bodies of shared_external functions won’t be serialized at all if they are referenced only from functions with external linkage. And declarations of external functions referenced only from functions with external linkage won’t be serialized too.
With this changes SILSerializer emits significantly fewer function declarations.
Fixes rdar://30081040
This is the lifetime ending variant of fix_lifetime. It is a lie to the
ownership verifier that a value is being consumed along a path. Its intention is
to be used to allow for the static verification of ownership in deallocating
deinits which for compatibility with objective-c have weird ownership behavior.
See the commit merged with this commit for more information.
Introduce an algorithm to canonicalize and minimize same-type
constraints. The algorithm itself computes the equivalence classes
that would exist if all explicitly-provided same-type constraints are
ignored, and then forms a minimal, canonical set of explicit same-type
constraints to reform the actual equivalence class known to the type
checker. This should eliminate a number of problems we've seen with
inconsistently-chosen same-type constraints affecting
canonicalization.
[NFC] Add -enable-sil-opaque-values frontend option.
This will be used to change the SIL-level calling convention for opaque values,
such as generics and resilient structs, to pass-by-value. Under this flag,
opaque values have SSA lifetimes, managed by copy_value and destroy_value.
This will make it easier to optimize copies and verify ownership.
* [SILGen] type lowering support for opaque values.
Add OpaqueValueTypeLowering.
Under EnableSILOpaqueValues, lower address-only types as opaque values.
* [SIL] Fix ValueOwnershipKind to support opaque SIL values.
* Test case: SILGen opaque value support for Parameter/ResultConvention.
* [SILGen] opaque value support for function arguments.
* Future Test case: SILGen opaque value specialDest arguments.
* Future Test case: SILGen opaque values: emitOpenExistential.
* Test case: SIL parsing support for EnableSILOpaqueValues.
* SILGen opaque values: prepareArchetypeCallee.
* [SIL Verify] allow copy_value for EnableSILOpaqueValues.
* Test cast: SIL serializer support for opaque values.
* Add a static_assert for ParameterConvention layout.
* Test case: Mandatory SILOpt support for EnableSILOpaqueValues.
* Test case: SILOpt support for EnableSILOpaqueValues.
* SILGen opaque values: TypeLowering emitCopyValue.
* SILBuilder createLoad. Allow loading opaque values.
* SIL Verifier. Allow loading and storing opaque values.
* SILGen emitSemanticStore support for opaque values.
* Test case for SILGen emitSemanticStore.
* Test case for SIL mandatory support for inout assignment.
* Fix SILGen opaque values test case after rebasing.
Textual SIL was sometimes ambiguous when SILDeclRefs were used, because the textual representation of SILDeclRefs was the same for functions that have the same name, but different signatures.
Textual SIL was sometimes ambiguous when SILDeclRefs were used, because the textual representation of SILDeclRefs was the same for functions that have the same name, but different signatures.
This is only enabled when semantic sil is enabled /and/ we are not parsing
unqualified SIL.
*NOTE* To properly write tests for this, I had to rework how we verified
Branch/CondBranch insts to be actually correct (instead of pseudo-correct). I
have to put this functionality together in order to write tests.
rdar://29791263
The reason why I am introducing special instructions is so I can maintain the
qualified ownership API wedge in between qualified SIL and the rest of the ARC
instructions that are pervasively used in the compiler.
These instructions in the future /could/ be extended to just take @sil_unmanaged
operands directly, but I want to maintain flexibility to take regular
non-trivial operands in the short term.
rdar://29791263
When enumerating requirements, always use the archetype anchors to
express requirements. Unlike "representatives", which are simply there
to maintain the union-find data structure used to track equivalence
classes of potential archetypes, archetype anchors are the
ABI-stable canonical types within a fully-formed generic signature.
The test case churn comes from two places. First, while
representatives are *often* the same as the archetype anchors, they
aren't *always* the same. Where they differ, we'll see a change in
both the printed generic signature and, therefore, it's
mangling.
Additionally, requirement inference now takes much greater
care to make sure that the first types in the requirement follow
archetype anchor ordering, so actual conformance requirements occur in
the requirement list at the archetype anchor---not at the first type
that is equivalent to the anchor---which permits the simplification in
IRGen's emission of polymorphic arguments.
This is dead code and can be re-added if it is needed. Right now though there
really isnt a ValueOwnershipKind that corresponds to deallocating and I do not
want to add a new ValueOwnershipKind for dead code.
This was in the first high level ARC instruction proposal, but I have not needed
it until now. The use case for this is to ahandle strong_retain_unowned (which
takes in an unowned value, asserts it is still alive, performs a strong_retain,
and returns the @owned value). This @owned value needs a destroy_value.
rdar://29671437
