This replaces the '[volatile]' flag. Now, class_method and
super_method are only used for vtable dispatch.
The witness_method instruction is still overloaded for use
with both ObjC protocol requirements and Swift protocol
requirements; the next step is to make it only mean the
latter, also using objc_method for ObjC protocol calls.
This will let me treat self during delegating initialization as an lvalue and
thus be emitted later without a scope. Thus I can simplify delegating
initialization slightly and land my argument scoping work.
rdar://33358110
Now that we more tightly close formal accesses on lvalues, having LoadExpr and friends try to return a +0 loaded value is unsafe without deeper analysis, since the access will be closed immediately after the load and potentially free temporary memory that might be the only thing keeping the borrowed object alive. Fixes rdar://problem/32730865.
Officially kick SILBoxType over to be "nominal" in its layout, with generic layouts structurally parameterized only by formal types. Change SIL to lower a capture to a nongeneric box when possible, or a box capturing the enclosing generic context when necessary.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
Optional now lowers its payload type, and we lower away the Optional/IUO distinction in SIL's type system, but the verifier was not updated to account for this.
Keep in mind that these are approximations that will not impact correctness
since in all cases I ensured that the SIL will be the same after the
OwnershipModelEliminator has run. The cases that I was unsure of I commented
with SEMANTIC ARC TODO. Once we have the verifier any confusion that may have
occurred here will be dealt with.
rdar://28685236
This ensures that ownership is properly propagated forward through the use-def
graph.
This was the work that was stymied by issues relating to SILBuilder performing
local ARC dataflow. I ripped out that local dataflow in 6f4e2ab and added a
cheap ARC guaranteed dataflow pass that performs the same optimization.
Also in the process of doing this work, I found that there were many SILGen
tests that were either pattern matching in the wrong functions or had wrong
CHECK lines (for instance CHECK_NEXT). I fixed all of these issues and also
expanded many of the tests so that they verify ownership. The only work I left
for a future PR is that there are certain places in tests where we are using the
projection from an original value, instead of a copy. I marked those with a
message SEMANTIC ARC TODO so that they are easy to find.
rdar://28685236
Being generic, the '_unwrapped' intrinsics force trafficking through memory, and while they're transparent so always get inlined, we don't do memory promotion in -Onone. Emitting the branch inline lets loadable optionals stay values leading to better -Onone codegen. (It also lets us throw away a surprising amount of support code for these optional intrinsics.)
This is a squash of the following commits:
* [SE-0054] Import function pointer arg, return types, typedefs as optional
IUOs are only allowed on function decl arguments and return types, so
don't import typedefs or function pointer args or return types as IUO.
* [SE-0054] Only allow IUOs in function arg and result type.
When validating a TypeRepr, raise a diagnostic if an IUO is found
anywhere other thn the top level or as a function parameter or return
tpye.
* [SE-0054] Disable inference of IUOs by default
When considering a constraint of the form '$T1 is convertible to T!',
generate potential bindings 'T' and 'T?' for $T1, but not 'T!'. This
prevents variables without explicit type information from ending up with
IUO type. It also prevents implicit instantiation of functions and types
with IUO type arguments.
* [SE-0054] Remove the -disable-infer-iuos flag.
* Add nonnull annotations to ObjectiveCTests.h in benchmark suite.
Similarly to how we've always handled parameter types, we
now recursively expand tuples in result types and separately
determine a result convention for each result.
The most important code-generation change here is that
indirect results are now returned separately from each
other and from any direct results. It is generally far
better, when receiving an indirect result, to receive it
as an independent result; the caller is much more likely
to be able to directly receive the result in the address
they want to initialize, rather than having to receive it
in temporary memory and then copy parts of it into the
target.
The most important conceptual change here that clients and
producers of SIL must be aware of is the new distinction
between a SILFunctionType's *parameters* and its *argument
list*. The former is just the formal parameters, derived
purely from the parameter types of the original function;
indirect results are no longer in this list. The latter
includes the indirect result arguments; as always, all
the indirect results strictly precede the parameters.
Apply instructions and entry block arguments follow the
argument list, not the parameter list.
A relatively minor change is that there can now be multiple
direct results, each with its own result convention.
This is a minor change because I've chosen to leave
return instructions as taking a single operand and
apply instructions as producing a single result; when
the type describes multiple results, they are implicitly
bound up in a tuple. It might make sense to split these
up and allow e.g. return instructions to take a list
of operands; however, it's not clear what to do on the
caller side, and this would be a major change that can
be separated out from this already over-large patch.
Unsurprisingly, the most invasive changes here are in
SILGen; this requires substantial reworking of both call
emission and reabstraction. It also proved important
to switch several SILGen operations over to work with
RValue instead of ManagedValue, since otherwise they
would be forced to spuriously "implode" buffers.
The SIL parser used PolymorphicFunctionType in two places:
- Internals of SILFunctionType parsing
- Overload selection for class_method / super_method / dynamic_method
instructions
It is better to have Sema construct GenericFunctionType directly
in SIL mode. In particular, the overload selection logic is simpler
now, since it does not have to deal with the fact that
PolymorphicFunctionTypes do not canonicalize.
Mostly NFC, except the SIL printer output is a bit different; for a
generic method on a generic type, the type parameters all come first,
like ``<T><U> G<T> -> (U) -> ()'' -vs- ``<T> G<T> -> <U> (U) -> ()''.
Also, generic constraints look different, instead of ``<`Self` : P>``
we now have ``<Self where Self : P>''.
This patch has two consequences that will become important later:
- While code that constructs PolymorphicFunctionType still exists in
Sema, the SIL parser was the last major component that *consumed*
PolymorphicFunctionType.
- Everywhere we set SILFunction::ContextGenericParams, we now have
a well-formed context GenericSignature available, allowing
ContextGenericParams to be replaced by a GenericSignature
eventually.
And use project_box to get to the address value.
SILGen now generates a project_box for each alloc_box.
And IRGen re-uses the address value from the alloc_box if the operand of project_box is an alloc_box.
This lets the generated code be the same as before.
Other than that most changes of this (quite large) commit are straightforward.
Having a separate address and container value returned from alloc_stack is not really needed in SIL.
Even if they differ we have both addresses available during IRGen, because a dealloc_stack is always dominated by the corresponding alloc_stack in the same function.
Although this commit quite large, most changes are trivial. The largest non-trivial change is in IRGenSIL.
This commit is a NFC regarding the generated code. Even the generated SIL is the same (except removed #0, #1 and @local_storage).
Parameters (to methods, initializers, accessors, subscripts, etc) have always been represented
as Pattern's (of a particular sort), stemming from an early design direction that was abandoned.
Being built on top of patterns leads to patterns being overly complicated (e.g. tuple patterns
have to have varargs and default parameters) and make working on parameter lists complicated
and error prone. This might have been ok in 2015, but there is no way we can live like this in
2016.
Instead of using Patterns, carve out a new ParameterList and Parameter type to represent all the
parameter specific stuff. This simplifies many things and allows a lot of simplifications.
Unfortunately, I wasn't able to do this very incrementally, so this is a huge patch. The good
news is that it erases a ton of code, and the technical debt that went with it. Ignoring test
suite changes, we have:
77 files changed, 2359 insertions(+), 3221 deletions(-)
This patch also makes a bunch of wierd things dead, but I'll sweep those out in follow-on
patches.
Fixes <rdar://problem/22846558> No code completions in Foo( when Foo has error type
Fixes <rdar://problem/24026538> Slight regression in generated header, which I filed to go with 3a23d75.
Fixes an overloading bug involving default arguments and curried functions (see the diff to
Constraints/diagnostics.swift, which we now correctly accept).
Fixes cases where problems with parameters would get emitted multiple times, e.g. in the
test/Parse/subscripting.swift testcase.
The source range for ParamDecl now includes its type, which permutes some of the IDE / SourceModel tests
(for the better, I think).
Eliminates the bogus "type annotation missing in pattern" error message when a type isn't
specified for a parameter (see test/decl/func/functions.swift).
This now consistently parenthesizes argument lists in function types, which leads to many diffs in the
SILGen tests among others.
This does break the "sibling indentation" test in SourceKit/CodeFormat/indent-sibling.swift, and
I haven't been able to figure it out. Given that this is experimental functionality anyway,
I'm just XFAILing the test for now. i'll look at it separately from this mongo diff.
All refutable patterns and function parameters marked with 'var'
is now an error.
- Using explicit 'let' keyword on function parameters causes a warning.
- Don't suggest making function parameters mutable
- Remove uses in the standard library
- Update tests
rdar://problem/23378003
SILPrinter was printing uses for all SIL values, except for SIL basic blocks arguments. Fill the gap and print uses for BB arguments as well. This makes reading and analyzing SIL easier.
Basic blocks may have multiple arguments, therefore print uses of each BB argument on separate lines - one line per BB argument.
The comment containing information about uses of a BB argument is printed on the line just above the basic block name, following the approach used for function_ref and other kinds of instructions, which have additional information printed on the line above the actual instruction.
The output now looks like:
// %0 // user: %3
// %1 // user: %9
bb0(%0 : $Int32, %1 : $UnsafeMutablePointer<UnsafeMutablePointer<Int8>>):
rdar://23336589
Because of the @opened attr, they need to be parenthesized in some positions, particularly in opened existential metatypes like (@opened P).Type. This should fix the parse_stdlib validation tests.
Swift SVN r27424
Consistently open all references into existentials into
opened-existential archetypes within the constraint solver. Then,
during constraint application, use OpenExistentialExprs to record in
the AST where an existential is opened into an archetype, then use
that archetype throughout the subexpression. This simplifies the
overall representation, since we don't end up with a mix of operations
on existentials and operations on archetypes; it's all archetypes,
which tend to have better support down the line in SILGen already.
Start simplifying the code in SILGen by taking away the existential
paths that are no longer needed. I suspect there are more
simplifications to be had here.
The rules for placing OpenExistentialExprs are still a bit ad hoc;
this will get cleaned up later so that we can centralize that
information. Indeed, the one regression in the compiler-crasher suite
is because we're not closing out an open existential along an error
path.
Swift SVN r27230
Make this diagnostic a little nicer in other ways, too:
- Highlight the whole attribute (including the at-sign).
- Don't hardcode the string "objc".
Swift SVN r25999
Most tests were using %swift or similar substitutions, which did not
include the target triple and SDK. The driver was defaulting to the
host OS. Thus, we could not run the tests when the standard library was
not built for OS X.
Swift SVN r24504
