This has the effect of propagating the search path to the clang importer as '-iframework'.
It doesn't affect whether a swift module is treated as system or not, this can be done as follow-up enhancement.
Previously looking up an extension would result in all extensions for
types with the same name (nested or not) being deserialized; this
could even bring in base types that had not been deserialized yet. Add
in a string to distinguish an extension's base type; in the top-level
case this is just a module name, but for nested types it's a full
mangled name.
This is a little heavier than I'd like it to be, since it means we
mangle names and then throw them away, and since it means there's a
whole bunch of extra string data in the module just for uniquely
identifying a declaration. But it's correct, and does less work than
before, and fixes a circularity issue with a nested type A.B.A that
apparently used to work.
https://bugs.swift.org/browse/SR-3915
There's a class of errors in Serialization called "circularity
issues", where declaration A in file A.swift depends on declaration B
in file B.swift, and B also depends on A. In some cases we can manage
to type-check each of these files individually due to the laziness of
'validateDecl', but then fail to merge the "partial modules" generated
from A.swift and B.swift to form a single swiftmodule for the library
(because deserialization is a little less lazy for some things). A
common case of this is when at least one of the declarations is
nested, in which case a lookup to find that declaration needs to load
all the members of the parent type. This gets even worse when the
nested type is defined in an extension.
This commit sidesteps that issue specifically for nested types by
creating a top-level, per-file table of nested types in the "partial
modules". When a type is in the same module, we can then look it up
/without/ importing all other members of the parent type.
The long-term solution is to allow accessing any members of a type
without having to load them all, something we should support not just
for module-merging while building a single target but when reading
from imported modules as well. This should improve both compile time
and memory usage, though I'm not sure to what extent. (Unfortunately,
too many things still depend on the whole members list being loaded.)
Because this is a new code path, I put in a switch to turn it off:
frontend flag -disable-serialization-nested-type-lookup-table
https://bugs.swift.org/browse/SR-3707 (and possibly others)
The typedef `swift::Module` was a temporary solution that allowed
`swift::Module` to be renamed to `swift::ModuleDecl` without requiring
every single callsite to be modified.
Modify all the callsites, and get rid of the typedef.
Teach the serialized form of ArchetypeType about its owning generic
environment, so we can wire up the generic environment of (primary)
archetypes eagerly (at the point of deserialization) rather than when
we form the generic environment. This ensures that there is no point
at which we have a (non-opened-existential) archetype without a
generic environment.
... except that the type reconstruction code creates such archetypes.
Teach the serialization of SIL generic environments, which used to be
a trailing record following the SIL function definition, to use the
same uniqued "generic environment IDs" that are used for the AST
generic environments. Many of them overlap anyway, and SIL functions
tend to have AST generic environments anyway.
This approach guarantees that the AST + SIL deserialization provide
the same uniqueness of generic environments present prior to
serialization.
Deserializing a generic environment can involve the type checker
(because it can cause the Clang importer to deserialize more), so we
cannot safely be completely lazy about a deserialized generic
environment if, e.g., SILGen or the AST verifier refers to
it. Therefore, implement a basic "pending actions" infrastructure so
that we will force the complete deserialization of any
lazily-deserialized generic environments when the outermost
deserialization of that ModuleFile occurs. This gives us the internal
laziness we need to wire up generic environments without being truly
lazy across compilation phases.
Fixes rdar://problem/29741827.
Serialize generic environments via a generic environment ID with a
separte offset table, so we have identity for the generic environments
and will share generic environments on deserialization.
When deserializing the generic environment for a generic type, only
immediately deserialize the generic signature. The generic environment
will be deserialized later, when it's needed.
When we deserialize a function that has a generic environment, set the
generic signature and a key to allow lazy creation of the generic
environment. Because most clients won't need the generic environment,
this lets us avoid creating generic environments.
When a pattern within a type context is serialized, serialize its
interface type (not its contextual type). When deserializing, record
the interface type and keep a side table of the associated
DeclContext, so that we can lazily map to the contextual type on first
access. This is designed to break recursion when we change the way
archetypes and generic environments are serialized.
An environment is always associated with a location with a signature, so
having them separate is pointless duplication. This patch also updates
the serialization to round-trip the signature data.
The witnesses in a NormalProtocolConformance have never been
completely serialized, because their substitutions involved a weird
mix of archetypes that blew up the deserialization code. So, only the
witness declarations themselves got serialized. Many clients (the type
checker, SourceKit, etc.) didn't need the extra information, but some
clients (e.g., the SIL optimizers) would end up recomputing this
information. Ick.
Now, serialize the complete Witness structure along with the AST,
including information about the synthetic environment, complete
substitutions, etc. This should obsolete some redundant code paths in
the SIL optimization infrastructure.
This (de-)serialization code takes a new-ish approach to serializing
the synthetic environment in that it avoids serializing any
archetypes. Rather, it maps everything back to interface types during
serialization, and deserialization forms a new generic environment
(with new archetypes!) on-the-fly, mapping deserialized types back
into that environment (and to those archetypes). This way, we don't
have to maintain identity of archetypes in the deserialization code,
and might get some better re-use of the archetypes.
More of rdar://problem/24079818.
According to the documentation, llvm::function_ref is better suited for function parameters taking closures.
But in this case we need to store a closure in the callback field and then invoke it multiple times. Therefore it is more appropriate to use std::function for this purpose.
Two of them are user-facing, with the following sort of message:
If you're seeing a crash here, check that your SDK and
dependencies match the versions used to build 'SwiftLib'
Prompted by rdar://problem/28282310, which took a while to figure out.
The added test case is a simplified version of the issue. (Obviously
we'd prefer to not crash here, but that's hard---there's an inherited
conformance that's no longer valid, and there may be generic types
depending on that conformance.)
A GenericEnvironment stores the mapping between GenericTypeParamTypes
and context archetypes (or eventually, concrete types, once we allow
extensions to constrain a generic parameter to a concrete type).
The goals here are two-fold:
- Eliminate the GenericTypeParamDecl::getArchetype() method, and
always use mapTypeIntoContext() instead
- Replace SILFunction::ContextGenericParams with a GenericEnvironment
This patch adds the new data type as well as serializer and AST
verifier support. but nothing else uses it yet.
Note that GenericSignature::get() now asserts if there are no
generic parameters, instead of returning null. This requires a
few tweaks here and there.
What I've implemented here deviates from the current proposal text
in the following ways:
- I had to introduce a FunctionArrowPrecedence to capture the parsing
of -> in expression contexts.
- I found it convenient to continue to model the assignment property
explicitly.
- The comparison and casting operators have historically been
non-associative; I have chosen to preserve that, since I don't
think this proposal intended to change it.
- This uses the precedence group names and higherThan/lowerThan
as agreed in discussion.
My earlier patch started serializing SIL basic blocks using the RPOT order. While it works, changing the existing order of BBs during the serialization may be very surprising for users. After all, serialization is not supposed to transform the code.
Therefore, this patch follows a different approach. It uses the existing order of BBs during the serialization. When it deserializes/parses SIL and detects a use of an opened archetype before its definition, it basically introduced a forward definition of this opened archetype. Later on, when the actual definition of the opened archetype is found, it replaces the forward definition. There is a correctness check at the end of a SIL function deserialization, which verifies that there are no forward definitions of opened archetypes left unresolved.
...with a better message than the generic "older version of the
compiler" one, when we know it's actually a different version of
Swift proper.
This still uses the same internal module version numbers to check
if the module is compatible; the presentation of language versions
is a diagnostic thing only.
Speaking of module version numbers, this deliberately does NOT
increment VERSION_MINOR; it's implemented in a backwards-compatible
way.
This will only work going forwards, of course; all existing modules
don't have a short version string, and I don't feel comfortable
assuming all older modules we might encounter are "Swift 2.2".
rdar://problem/25680392
The two types are nearly identical, and Fixnum is only in the Swift branches of LLVM,
not in mainline LLVM.
I do want to add ++ to PointerEmbeddedInt and fix some of this ugliness, but that'll
have to go through LLVM review, so it might take a bit.
Introduce Fix-Its to aid migration from selectors spelled as string
literals ("foo:bar:", which is deprecated), as well as from
construction of Selector instances from string literals
(Selector("foo:bar"), which is still acceptable but not recommended),
to the #selector syntax. Jump through some hoops to disambiguate
method references if there are overloads:
fixits.swift:51:7: warning: use of string literal for Objective-C
selectors is deprecated; use '#selector' instead
_ = "overloadedWithInt:" as Selector
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#selector(Bar.overloaded(_:) as (Bar) -> (Int) -> ())
In the cases where we cannot provide a Fix-It to a #selector
expression, we wrap the string literal in a Selector(...) construction
to suppress the deprecation warning. These are also easily searchable
in the code base.
This also means we're doing more validation of the string literals
that go into Selector, i.e., that they are well-formed selectors and
that we know about some method that is @objc and has that
selector. We'll warn if either is untrue.
The main idea here is that we really, really want to be
able to recover the protocol requirement of a conformance
reference even if it's abstract due to the conforming type
being abstract (e.g. an archetype). I've made the conversion
from ProtocolConformance* explicit to discourage casual
contamination of the Ref with a null value.
As part of this change, always make conformance arrays in
Substitutions fully parallel to the requirements, as opposed
to occasionally being empty when the conformances are abstract.
As another part of this, I've tried to proactively fix
prospective bugs with partially-concrete conformances, which I
believe can happen with concretely-bound archetypes.
In addition to just giving us stronger invariants, this is
progress towards the removal of the archetype from Substitution.
Parameters (to methods, initializers, accessors, subscripts, etc) have always been represented
as Pattern's (of a particular sort), stemming from an early design direction that was abandoned.
Being built on top of patterns leads to patterns being overly complicated (e.g. tuple patterns
have to have varargs and default parameters) and make working on parameter lists complicated
and error prone. This might have been ok in 2015, but there is no way we can live like this in
2016.
Instead of using Patterns, carve out a new ParameterList and Parameter type to represent all the
parameter specific stuff. This simplifies many things and allows a lot of simplifications.
Unfortunately, I wasn't able to do this very incrementally, so this is a huge patch. The good
news is that it erases a ton of code, and the technical debt that went with it. Ignoring test
suite changes, we have:
77 files changed, 2359 insertions(+), 3221 deletions(-)
This patch also makes a bunch of wierd things dead, but I'll sweep those out in follow-on
patches.
Fixes <rdar://problem/22846558> No code completions in Foo( when Foo has error type
Fixes <rdar://problem/24026538> Slight regression in generated header, which I filed to go with 3a23d75.
Fixes an overloading bug involving default arguments and curried functions (see the diff to
Constraints/diagnostics.swift, which we now correctly accept).
Fixes cases where problems with parameters would get emitted multiple times, e.g. in the
test/Parse/subscripting.swift testcase.
The source range for ParamDecl now includes its type, which permutes some of the IDE / SourceModel tests
(for the better, I think).
Eliminates the bogus "type annotation missing in pattern" error message when a type isn't
specified for a parameter (see test/decl/func/functions.swift).
This now consistently parenthesizes argument lists in function types, which leads to many diffs in the
SILGen tests among others.
This does break the "sibling indentation" test in SourceKit/CodeFormat/indent-sibling.swift, and
I haven't been able to figure it out. Given that this is experimental functionality anyway,
I'm just XFAILing the test for now. i'll look at it separately from this mongo diff.
