This function is used by passes and salvages to facilitate adding
instructions to reconstruction blocks, even if no block exists on the
debug value yet.
Opaque return types are special type declarations that have it
own nested generic signature. Thus, given this:
```
protocol P<A> { associatedtype A: ~Copyable }
func f<T: ~Copyable>() -> some P<T> {}
```
The generic signature for f is <T where T Escapable>, and
for the opaque return type, its nested signature ends up as
```
<X where X: P, X.A == T>
```
With SE-503, we will now also expand a default for the suppressed
primary associated type, so the signature after expansion becomes
```
<X where X: P, X.A == T, X.A: Copyable>
```
It would be smarter to effectively have this rule
```
X.A == T, T: ~Copyable
----------------------
X.A: ~Copyable
```
where we infer the inverse on X.A to cancel-out the
expanded default X.A: Copyable. We already do this for
two in-scope type parameters, and it would be better if
we did it if one side was out-of-scope, but that would
be source-breaking to do in general.
In the case of opaque return types, the fact that
it has a nested generic signature seems more an
artifact of the implementation. There also is little
risk of source break, as the only kinds of same-type
requirements that can appear are from parameterized
protocol type.
The experimental suppressed associated types prior to
SE-503 wouldn't be broken by this change, as they do
not infer defaults that need suppression, and we only
filter-out requirements from defaults expansion, rather
than explicitly-written ones.
rdar://175500824
There's a need for more control over how default requirements
for conformance to Copyable/Escapable are expanded, and
subsequently how inverses are applied or inferred to cancel-out
those defaults.
The pattern of `/*applyInverses*/BOOL` is insufficient, so this
is a refactoring to grow that into a proper type that carries
an option that can be used in some future scenario about inferring
inverses for opaque return types.
Prevents situations when actor isolation ends up not being set
un-intentionally i.e. when cloning, specializating, or creating
thunks.
The thunks get `unspecified` isolation at the moment.
The `@export(interface)` and `@export(implementation)` attributes
SE-0497 are queried directly on AST nodes in several places within the
SIL pipeline. However, they don't persist when SIL functions are
serialized, meaning that clients of the original module might make
different assumptions about the availability of a given function's
definition.
Represent these attributes in a SIL function (as an optional
CodeGenerationModel), (de-)serialize them into the module, and add a
textual representation as SIL function attributes `[export_interface]`
and `[export_implementation]`.
This new OSSA invariant simplifies many optimizations because they don't have to take care of the corner case of incomplete lifetimes in dead-end blocks.
The implementation basically consists of these changes:
* add the lifetime completion utility
* add a flag in SILFunction which tells optimization that they need to run the lifetime completion utility
* let all optimizations complete lifetimes if necessary
* enable the ownership verifier to check complete lifetimes
These two new invariants eliminate corner cases which caused bugs if optimization didn't handle them.
Also, it will significantly simplify lifetime completion.
The implementation basically consists of these changes:
* add a flag in SILFunction which tells optimization if they need to take care of infinite loops
* add a utility to break infinite loops
* let all optimizations remove unreachable blocks and break infinite loops if necessary
* add verification to check the new SIL invariants
The new `breakIfniniteLoops` utility breaks infinite loops in the control flow by inserting an "artificial" loop exit to a new dead-end block with an `unreachable`.
It inserts a `cond_br` with a `builtin "infinite_loop_true_condition"`:
```
bb0:
br bb1
bb1:
br bb1 // back-end branch
```
->
```
bb0:
br bb1
bb1:
%1 = builtin "infinite_loop_true_condition"() // always true, but the compiler doesn't know
cond_br %1, bb2, bb3
bb2: // new back-end block
br bb1
bb3: // new dead-end block
unreachable
```
Whenever we have a reference to a foreign function/variable in SIL, use
a mangled name at the SIL level with the C name in the asmname
attribute. The expands the use of asmname to three kinds of cases that
it hadn't been used in yet:
* Declarations imported from C headers/modules
* @_cdecl @implementation of C headers/modules
* @_cdecl functions in general
Some code within the SIL pipeline makes assumptions that the C names of
various runtime functions are reflected at the SIL level. For example,
the linking of Embedded Swift runtime functions is done by-name, and
some of those names refer to C functions (like `swift_retain`) and
others refer to Swift functions that use `@_silgen_name` (like
`swift_getDefaultExecutor`). Extend the serialized module format to
include a table that maps from the asmname of functions/variables over
to their mangled names, so we can look up functions by asmname if we
want. These tables could also be used for checking for declarations
that conflict on their asmname in the future. Right now, we leave it
up to LLVM or the linker to do the checking.
`@_silgen_name` is not affected by these changes, nor should it be:
that hidden feature is specifically meant to affect the name at the
SIL level.
The vast majority of test changes are SIL tests where we had expected
to see the C/C++/Objective-C names in the tests for references to
foreign entities, and now we see Swift mangled names (ending in To).
The SIL declarations themselves will have a corresponding asmname.
Notably, the IRGen tests have *not* changed, because we generally the
same IR as before. It's only the modeling at the SIL lever that has
changed.
Another part of rdar://137014448.
Deferred code generation only produces symbols when they are needed.
Expand this out to cover more of the cases where we need them:
* @c/@_cdecl with and without @implementation
* @_expose(Cxx) and @_expose(Wasm)
* @_section and @_used
* (already present) the main entry point
Part of the Embedded Swift linkage model. Also fixes#74328 /
rdar://147207945 along the way.
When Embedded Swift emits a symbol that was imported from another
module, ensure that the symbol is emitted as a weak definition. This
way, importing the same module (and using its symbol) into several
different modules doesn't cause duplicate-symbol errors at link time.
Rather, the linker will merge the different symbol definitions. This
makes Embedded Swift libraries work without resorting to
`-mergeable-symbols` or `-emit-empty-object-file`.
functions to compute them directly without a TypeLowering object, and
change a lot of getTypeLowering call sites to just use that.
There is one subtle change here that I think is okay: SILBuilder used to
use different TypeExpansionContexts when inserting into a global:
- getTypeLowering() always used a minimal context when inserting into
a global
- getTypeExpansionContext() always returned a maximal context for the
module scope
The latter seems more correct, as AFAIK global initializers are never
inlinable. If they are, we probably need to configure the builder with
an actual context properly rather than making global assumptions.
This is incremental progress towards computing this for most types
without a TypeLowering, and hopefully eventually removing TL entirely.
Similarly to how https://github.com/swiftlang/swift/pull/70564 configures 'ClangImporter's 'CodeGenerator' using Swift's compilation target triple, we must use the versioned version of the 'isWeakImported' query to determine linkage for imported Clang symbols.
Put AvailabilityRange into its own header with very few dependencies so that it
can be included freely in other headers that need to use it as a complete type.
NFC.
This ended up in creating a lot of Array functions, even if a program didn't use Array at all.
Now, only add specialization attributes if a function is already there.
Otherwise remember the attributes and add them to a function once it is created.
The generality of the `AvailabilityContext` name made it seem like it
encapsulates more than it does. Really it just augments `VersionRange` with
additional set algebra operations that are useful for availability
computations. The `AvailabilityContext` name should be reserved for something
pulls together more than just a single version.
Although I don't plan to bring over new assertions wholesale
into the current qualification branch, it's entirely possible
that various minor changes in main will use the new assertions;
having this basic support in the release branch will simplify that.
(This is why I'm adding the includes as a separate pass from
rewriting the individual assertions)
inlining, generic/closure specialization, and devirtualization optimization passes.
SILFunction::canBeInlinedIntoCaller now exlicitly requires a caller's SerializedKind_t arg.
isAnySerialized() is added as a convenience function that checks if [serialized] or [serialized_for_pkg].
Resolves rdar://128704752
[serialized_for_package] if Package CMO is enabled. The latter kind
allows a function to be serialized even if it contains loadable types,
if Package CMO is enabled. Renamed IsSerialized_t as SerializedKind_t.
The tri-state serialization kind requires validating inlinability
depending on the serialization kinds of callee vs caller; e.g. if the
callee is [serialized_for_package], the caller must be _not_ [serialized].
Renamed `hasValidLinkageForFragileInline` as `canBeInlinedIntoCaller`
that takes in its caller's SerializedKind as an argument. Another argument
`assumeFragileCaller` is also added to ensure that the calle sites of
this function know the caller is serialized unless it's called for SIL
inlining optimization passes.
The [serialized_for_package] attribute is allowed for SIL function, global var,
v-table, and witness-table.
Resolves rdar://128406520
SILFunction::shouldBePreservedForDebugger checks if some optimizations
are enabled to decide whether a function should be preserved so its
accessible form the debugger or not. Some of these settings used to live
only in IRGenOptions making SILFunction depend on IRGenOptions.
package-wide resilience domain if Package CMO is enabled.
The purpose of the attribute includes:
- Indicates that certain types such as loadable types are
allowed in serialized functions in resiliently built module
if the optimization is enabled, which are otherwise disallowed.
- Used during SIL deserialization to determine whether such
functions are allowed.
- Used to determine if a callee can be inlined into a caller
that's serialized without package-cmo, e.g. with an explicit
annotation like @inlinable, where the callee was serialized
due to package-cmo.
Resolves rdar://127870822
At Onone, many types of functions (anything user written, compiler
generated setters and getters, etc), should be kept in the final
binary so they're accessible by the debugger.
rdar://126763340
module when package serialization is enabled, return maximal resilience expansion
in SILFunction::getResilienceExpansion(). This allows aggregate types to be generated
as loadable SIL types which otherwise are address-only in a serialized function.
During type lowering, opaque flag setting is also skipped if package serialization
is enabled.
Resolves rdar://127400743
* Add a new flag -experimental-package-cmo that requires -experimental-allow-non-resilient-access.
* Support serializing package decls for CMO in package if enabled.
* Only applies to default mode CMO.
* Unlike the existing CMO, package CMO can be built with -enable-library-evolution as package
modules are required to be built together in the same project.
* Create hasPublicOrPackageVisibility to opt in for package decls; needed for CMO, SILVerifier,
and other call sites that verify or determine codegen.
Resolves rdar://121976014
In embedded swift all de-serialized get public linkage because all the code is generated in the top-level module.
This change moves the point where we make de-serialized functions public to the end of the pipeline.
This allows dead function elimination to remove unused de-serialized functions.
For some stdlib functions (actually one: the Double initializer for a builtin integer) is essential, because codegen for embedded produces an unresolved symbol.
rdar://123772098
Emil Pedersen
Kavon Farvardin
Pavel Yaskevich
Doug Gregor
Erik Eckstein
Slava Pestov
John McCall
Artem Chikin
Allan Shortlidge
Tim Kientzle
Meghana Gupta
Ellie Shin
Augusto Noronha
Arnold Schwaighofer
Michael Gottesman
Michael Buch
Pavel Yaskevich