I put in a simple fixup pass (MarkUninitializedFixup) for staging purposes. I
don't expect it to be in tree long. I just did not feel comfortable fixing up in
1 commit all of the passes up to DI.
rdar://31521023
The Swift 4 Migrator is invoked through either the driver and frontend
with the -update-code flag.
The basic pipeline in the frontend is:
- Perform some list of syntactic fixes (there are currently none).
- Perform N rounds of sema fix-its on the primary input file, currently
set to 7 based on prior migrator seasons. Right now, this is just set
to take any fix-it suggested by the compiler.
- Emit a replacement map file, a JSON file describing replacements to a
file that Xcode knows how to understand.
Currently, the Migrator maintains a history of migration states along
the way for debugging purposes.
- Add -emit-remap frontend option
This will indicate the EmitRemap frontend action.
- Don't fork to a separte swift-update binary.
This is going to be a mode of the compiler, invoked by the same flags.
- Add -disable-migrator-fixits option
Useful for debugging, this skips the phase in the Migrator that
automatically applies fix-its suggested by the compiler.
- Add -emit-migrated-file-path option
This is used for testing/debugging scenarios. This takes the final
migration state's output text and writes it to the file specified
by this option.
- Add -dump-migration-states-dir
This dumps all of the migration states encountered during a migration
run for a file to the given directory. For example, the compiler
fix-it migration pass dumps the input file, the output file, and the
remap file between the two.
State output has the following naming convention:
${Index}-${MigrationPassName}-${What}.${extension}, such as:
1-FixitMigrationState-Input.swift
rdar://problem/30926261
Track the types we've seen instead of the type declarations we've
passed through, which eliminates some holes relating to generic types.
Detect infinite expansions by imposing an arbitrary limit.
Fixes rdar://30355804
If the -enable-experimental-subclass-existentials staging flag
is on, resolveType() now allows protocol compositions to contain
class types. It also diagnoses if a composition has more than one
superclass requirement.
Also, change diagnostics that talked about 'protocol composition'
to 'protocol-constrained type'.
Since such types can now contain a superclass constraint, it's not
correct to call them protocol composition.
"Protocol-constrained type" isn't quite accurate either because
'Any' has no protocols, and 'AnyObject' will have no protocols but
a general class constraint; but those are edge cases which won't
come up in these diagnostics.
- Add CompilerInvocation::getPCHHash
This will be used when creating a unique filename for a persistent
precompiled bridging header.
- Automatically generate and use a precompiled briding header
When we're given both -import-objc-header and -pch-output-dir
arguments, we will try to:
- Validate what we think the PCH filename should be for the bridging
header, based on the Swift PCH hash and the clang module hash.
- If we're successful, we'll just use it.
- If it's out of date or something else is wrong, we'll try to
emit it.
- This gives us a single filename which we can `stat` to check for the
validity of our code completion cache, which is keyed off of module
name, module filename, and module file age.
- Cache code completion results from imported modules
If we just have a single .PCH file imported, we can use that file as
part of the key used to cache declarations in a module. Because
multiple files can contribute to the __ObjC module, we've always given
it the phony filename "<imports>", which never exists, so `stat`-ing it
always fails and we never cache declarations in it.
This is extremely problematic for projects with huge bridging headers.
In the case where we have a single PCH import, this can bring warm code
completion times down to about 500ms from over 2-3s, so it can provide a
nice performance win for IDEs.
- Add a new test that performs two code-completion requests with a bridging header.
- Add some -pch-output-dir flags to existing SourceKit tests that import a bridging
header.
rdar://problem/31198982
Introduce flags `-enable-swift3-objc-inference` and
`-disable-swift3-objc-inference` to enable/disable the Swift 3 `@objc`
inference rules. Under `-swift-version 3`, default to the former;
under `-swift-version 4`, default to the latter. For testing purposes,
one can provide either flag in eiher language mode.
Introduce an opt-in warning (enabled by the frontend option
-warn-swift3-objc-inference) for each declaration for which @objc is
inferred based on Swift 3 rules that no longer apply after SE-0160.
Flip the polarity of the frontend flag controlling whether TSan treats inout
accesses as conceptual writes. It is now on by default. This lets TSan detect
racing mutating methods even when those methods are not themselves instrumented
(such as methods on Standard Library collections).
This behavior can be disabled by passing:
-Xfrontend -disable-tsan-inout-instrumentation
when compiling under TSan.
rdar://problem/31069963
(This re-applies #7736 with an update to the
tsan-inout.swift execution test to handle configurations where
TSan's ignore_interceptors_accesses is enabled by default.)
Add SILGen instrumentation to treat inout accesses as Thread Sanitizer writes.
The goal is to catch races on inout accesses even when there is a not an
llvm-level read/write to a particular address. Ultimately
this will enable TSan to, for example, report racy writes to distinct
stored properties of a common struct as a data race.
This instrumentation is off by default. It can be enabled with the
'enable-experimental-tsan-inout-instrumentation' frontend flag.
The high-level approach is to add a SIL-level builtin that represents a call
to a TSan routine in compiler-rt. Then, when emitting an address for an LValue
as part of an inout expression, we call this builtin for each path component
that represents an LValue. I've added an 'isRValue()' method to PathComponent
that tracks whether a component represents an RValue or an LValue. Right the
only PathComponent that sometimes returns 'true' is ValueComponent().
For now, we're instrumenting only InoutExprs, but in the future it probably
makes sense to instrument all LValue accesses. In this patch I've
added a 'TSanKind' parameter to SILGenFunction::emitAddressOfLValue() and
its helpers to limit instrumentation to inout accesses. I envision that this
parameter will eventually go away.
Add SILGen instrumentation to treat inout accesses as Thread Sanitizer writes.
The goal is to catch races on inout accesses even when there is a not an
llvm-level read/write to a particular address. Ultimately
this will enable TSan to, for example, report racy writes to distinct
stored properties of a common struct as a data race.
This instrumentation is off by default. It can be enabled with the
'enable-experimental-tsan-inout-instrumentation' frontend flag.
The high-level approach is to add a SIL-level builtin that represents a call
to a TSan routine in compiler-rt. Then, when emitting an address for an LValue
as part of an inout expression, we call this builtin for each path component
that represents an LValue. I've added an 'isRValue()' method to PathComponent
that tracks whether a component represents an RValue or an LValue. Right the
only PathComponent that sometimes returns 'true' is ValueComponent().
For now, we're instrumenting only InoutExprs, but in the future it probably
makes sense to instrument all LValue accesses. In this patch I've
added a 'TSanKind' parameter to SILGenFunction::emitAddressOfLValue() and
its helpers to limit instrumentation to inout accesses. I envision that this
parameter will eventually go away.
Previously it was part of swiftBasic.
The demangler library does not depend on llvm (except some header-only utilities like StringRef). Putting it into its own library makes sure that no llvm stuff will be linked into clients which use the demangler library.
This change also contains other refactoring, like moving demangler code into different files. This makes it easier to remove the old demangler from the runtime library when we switch to the new symbol mangling.
Also in this commit: remove some unused API functions from the demangler Context.
fixes rdar://problem/30503344
SourceKit always sets it positively. This may lead to more aggressive fixits however
less informative messages. We currently use the flag only for filling protocol stubs.
Instead of appending a character for each substitution, we now prefix the substitution with the repeat count, e.g.
AbbbbB -> A5B
The same is done for known-type substitutions, e.g.
SiSiSi -> S3i
This significantly shrinks mangled names which contain large lists of the same type, like
func foo(_ x: (Int, Int, Int, Int, Int, Int, Int, Int, Int, Int, Int, Int))
rdar://problem/30707433
Avoid using std::string and std::vector in the demangler. Instead use vectors/strings with storage allocated by the NodeFactory’s bump pointer allocator.
This brings another 35% speedup. Especially in the case the Demangle::Context is not reused for subsequent demanglings.
Put in a general mechanism for mapping user-specified "compatibility
versions" to proper "effective versions" (what #if and @available
checking should respect). This may still be different from the
intrinsic "language version"; right now master is considered a "3.1"
compiler with a "Swift 4 mode", and we plan to ship a "4.0" compiler
with a "Swift 3 mode" that will have a version number of something
like "3.2".
rdar://problem/29884401 / SR-3791
