Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Now that ObjC types can be generic, we need to satisfy the type system by plumbing pseudogeneric parameters through func-to-block invocation thunks. Fixes rdar://problem/26524763.
This was mistakenly reverted in an attempt to fix buildbots.
Unfortunately it's now smashed into one commit.
---
Introduce @_specialize(<type list>) internal attribute.
This attribute can be attached to generic functions. The attribute's
arguments must be a list of concrete types to be substituted in the
function's generic signature. Any number of specializations may be
associated with a generic function.
This attribute provides a hint to the compiler. At -O, the compiler
will generate the specified specializations and emit calls to the
specialized code in the original generic function guarded by type
checks.
The current attribute is designed to be an internal tool for
performance experimentation. It does not affect the language or
API. This work may be extended in the future to add user-visible
attributes that do provide API guarantees and/or direct dispatch to
specialized code.
This attribute works on any generic function: a freestanding function
with generic type parameters, a nongeneric method declared in a
generic class, a generic method in a nongeneric class or a generic
method in a generic class. A function's generic signature is a
concatenation of the generic context and the function's own generic
type parameters.
e.g.
struct S<T> {
var x: T
@_specialize(Int, Float)
mutating func exchangeSecond<U>(u: U, _ t: T) -> (U, T) {
x = t
return (u, x)
}
}
// Substitutes: <T, U> with <Int, Float> producing:
// S<Int>::exchangeSecond<Float>(u: Float, t: Int) -> (Float, Int)
---
[SILOptimizer] Introduce an eager-specializer pass.
This pass finds generic functions with @_specialized attributes and
generates specialized code for the attribute's concrete types. It
inserts type checks and guarded dispatch at the beginning of the
generic function for each specialization. Since we don't currently
expose this attribute as API and don't specialize vtables and witness
tables yet, the only way to reach the specialized code is by calling
the generic function which performs the guarded dispatch.
In the future, we can build on this work in several ways:
- cross module dispatch directly to specialized code
- dynamic dispatch directly to specialized code
- automated specialization based on less specific hints
- partial specialization
- and so on...
I reorganized and refactored the optimizer's generic utilities to
support direct function specialization as opposed to apply
specialization.
Temporarily reverting @_specialize because stdlib unit tests are
failing on an internal branch during deserialization.
This reverts commit e2c43cfe14, reversing
changes made to 9078011f93.
Introduce a new SILPrintContext class which is the main handle passed to the SILModule's and SILFunction's print functions.
It also allows to let derived classes implement call backs on instruction printing.
NFC for now, but needed for the upcoming SIL-debuginfo change.
This attribute can be attached to generic functions. The attribute's
arguments must be a list of concrete types to be substituted in the
function's generic signature. Any number of specializations may be
associated with a generic function.
This attribute provides a hint to the compiler. At -O, the compiler
will generate the specified specializations and emit calls to the
specialized code in the original generic function guarded by type
checks.
The current attribute is designed to be an internal tool for
performance experimentation. It does not affect the language or
API. This work may be extended in the future to add user-visible
attributes that do provide API guarantees and/or direct dispatch to
specialized code.
This attribute works on any generic function: a freestanding function
with generic type parameters, a nongeneric method declared in a
generic class, a generic method in a nongeneric class or a generic
method in a generic class. A function's generic signature is a
concatenation of the generic context and the function's own generic
type parameters.
e.g.
struct S<T> {
var x: T
@_specialize(Int, Float)
mutating func exchangeSecond<U>(u: U, _ t: T) -> (U, T) {
x = t
return (u, x)
}
}
// Substitutes: <T, U> with <Int, Float> producing:
// S<Int>::exchangeSecond<Float>(u: Float, t: Int) -> (Float, Int)
This is only used in the verifier, to ensure that default witness
thunks are suffiently visible.
Also this patch removes the asserts enforcing that only resilient
protocols have a default witness table. This will change in an
upcoming patch, and in this patch is necessary for the test to work.
This instruction creates a "virtual" address to represent a property with a behavior that supports definite initialization. The instruction holds references to functions that perform the initialization and 'set' logic for the property. It will be DI's job to rewrite assignments into this virtual address into calls to the initializer or setter based on the initialization state of the property at the time of assignment.
Previously SILDefaultWitnessTables only included "resilient" default
implementations, which are currently defined as those that appear at the
end of a protocol, after any requirements without defaults.
However, this was too inflexible. Instead, include all entries in the
SILDefaultWitnessTable, with invalid entries standing in for requirements
without defaults.
Previously, the minimum witness table size was a separate parameter, also
appearing in SIL syntax; now it can be calculated by looking at the entries
themselves. The getResilientDefaultEntries() method of SILDefaultWitnessTable
returns the same result as getEntries() did previously.
This ireapplies commit 255c52de9f.
Original commit message:
Serialize debug scope and location info in the SIL assembler language.
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
remove the mixed concept that was SILFileLocation.
Also add support for a third type of underlying storage that will be used
for deserialized debug lcoations from textual SIL.
NFC
<rdar://problem/22706994>
For long names this is easier to read and in most cases the omitted information can be seen in the actual SIL code.
With the option -Xllvm -sil-full-demangle the old behavior can be restored.
This will be used to help IRGen record protocol requirements
with resilient default implementations in protocol metadata.
To enable testing before all the Sema support is in place, this
patch adds SIL parser, printer and verifier support for default
witness tables.
For now, SILGen emits empty default witness tables for protocol
declarations in resilient modules, and IRGen ignores them when
emitting protocol metadata.
inlined-at chain.
The previous implementation was only correct for cases where the inliner
inlined bottom-up in the call graph, which happened to cover the majority
of all cases.
rdar://problem/24462475
The SIL parser used PolymorphicFunctionType in two places:
- Internals of SILFunctionType parsing
- Overload selection for class_method / super_method / dynamic_method
instructions
It is better to have Sema construct GenericFunctionType directly
in SIL mode. In particular, the overload selection logic is simpler
now, since it does not have to deal with the fact that
PolymorphicFunctionTypes do not canonicalize.
Mostly NFC, except the SIL printer output is a bit different; for a
generic method on a generic type, the type parameters all come first,
like ``<T><U> G<T> -> (U) -> ()'' -vs- ``<T> G<T> -> <U> (U) -> ()''.
Also, generic constraints look different, instead of ``<`Self` : P>``
we now have ``<Self where Self : P>''.
This patch has two consequences that will become important later:
- While code that constructs PolymorphicFunctionType still exists in
Sema, the SIL parser was the last major component that *consumed*
PolymorphicFunctionType.
- Everywhere we set SILFunction::ContextGenericParams, we now have
a well-formed context GenericSignature available, allowing
ContextGenericParams to be replaced by a GenericSignature
eventually.
As part of SE-0022, introduce an 'objc_selector' encoding for string
literals that places the UTF-8 string literal into the appropriate
segment for uniquing of Objective-C selector names.
As there are no instructions left which produce multiple result values, this is a NFC regarding the generated SIL and generated code.
Although this commit is large, most changes are straightforward adoptions to the changes in the ValueBase and SILValue classes.
The main idea here is that we really, really want to be
able to recover the protocol requirement of a conformance
reference even if it's abstract due to the conforming type
being abstract (e.g. an archetype). I've made the conversion
from ProtocolConformance* explicit to discourage casual
contamination of the Ref with a null value.
As part of this change, always make conformance arrays in
Substitutions fully parallel to the requirements, as opposed
to occasionally being empty when the conformances are abstract.
As another part of this, I've tried to proactively fix
prospective bugs with partially-concrete conformances, which I
believe can happen with concretely-bound archetypes.
In addition to just giving us stronger invariants, this is
progress towards the removal of the archetype from Substitution.
If a global variable in a module we are compiling has a type containing
a resilient value type from a different module, we don't know the size
at compile time, so we cannot allocate storage for the global statically.
Instead, we will use a buffer, just like alloc_stack does for archetypes
and resilient value types.
This adds a new SIL instruction but does not yet make use of it.
This is something that we have wanted for a long time and will enable us to
remove some hacks from the compiler (i.e. how we determine in the ARC optimizer
that we have "fatalError" like function) and also express new things like
"noarc".
This is necessary for some other work I'm doing, which really wants
paramdecls to have reasonable declcontexts. It is also a small step
towards generic subscripts.
