I put in a simple fixup pass (MarkUninitializedFixup) for staging purposes. I
don't expect it to be in tree long. I just did not feel comfortable fixing up in
1 commit all of the passes up to DI.
rdar://31521023
We used to give witness thunks public linkage if the
conforming type and the protocol are public.
This is completely unnecessary. If the conformance is
fragile, the thunk should be [shared] [serialized],
allowing the thunk to be serialized into callers after
devirtualization.
Otherwise for private protocols or resilient modules,
witness thunks can just always be private.
This should reduce the size of compiled binaries.
There are two other mildly interesting consequences:
1) In the bridged cast tests, we now inline the witness
thunks from the bridgeable conformances, which removes
one level of indirection.
2) This uncovered a flaw in our accessibility checking
model. Usually, we reject a witness that is less
visible than the protocol; however, we fail to
reject it in the case that it comes from an
extension.
This is because members of an extension can be
declared 'public' even if the extended type is not
public, and it appears that in this case the 'public'
keyword has no effect.
I would prefer it if a) 'public' generated a warning
here, and b) the conformance also generated a warning.
In Swift 4 mode, we could then make this kind of
sillyness into an error. But for now, live with the
broken behavior, and add a test to exercise it to ensure
we don't crash.
There are other places where this "allow public but
ignore it, kinda, except respect it in some places"
behavior causes problems. I don't know if it was intentional
or just emergent behavior from general messiness in Sema.
3) In the TBD code, there is one less 'failure' because now
that witness thunks are no longer public, TBDGen does not
need to reason about them (except for the case #2 above,
which will probably require a similar workaround in TBDGen
as what I put into SILGen).
This fixes a crash when referencing partially-applied methods
from @_inlineable functions.
Also, curry thunks for private methods do not need shared
linkage; private is sufficient.
We had some non-deterministic behavior where depending on
validation order, synthesized accessors would end up in
different places because we would sometimes just add them
at the end of the member list.
Now add the getter right after the storage, the setter
right after the getter and the materializeForSet right
after the setter.
This changes some test output where the declaration order
did not make sense before but should otherwise have no
functional effect.
Instead of appending a character for each substitution, we now prefix the substitution with the repeat count, e.g.
AbbbbB -> A5B
The same is done for known-type substitutions, e.g.
SiSiSi -> S3i
This significantly shrinks mangled names which contain large lists of the same type, like
func foo(_ x: (Int, Int, Int, Int, Int, Int, Int, Int, Int, Int, Int, Int))
rdar://problem/30707433
This is in preparation for removing the +0 self hack.
This commit in more detail does the following:
1. It adds Formal Evaluation Scopes to certain places where the scopes were
missing. Specifically:
a. The SILGenLValue cases are places where we are invoking accessors. In each
one of these cases, we had a formal evaluation scope in the accessor
itself, but we did not have a scope that closed over the base access and
the accessor access. The base access is a formal evaluation in the sense
that just like with inout bases, we must create a new reference to the
base and re-destroy the base in a chain of accesses. This is to ensure
that we do not extend the lifetime of the base inappropriately.
b. The SILGenPoly case is a place where we have never properly placed a
Formal Evaluation Scope and have completely been relying on the +0 self
hack to make sure that archetype callees are properly destroyed
immediately after a +0 call.
2. It changes all of the places in SILGen that emit self to using formal access
cleanups instead of normal cleanups.
rdar://29791263
In the case where we already have a guaranteed value, the borrow operation will
just return the guaranteed manage value. Thus it is ok to always just perform
the borrow unconditionally.
rdar://29791263
In 74d979f0ac, the policy was changed
so that only value type accessors are ever marked transparent, and
not class accessors.
This was intended to fix a bug where inlining an accessor of an
Objective-C-derived class across module boundaries caused a linker
failure because the accessor referenced a field offset variable,
which has hidden visibility.
However, this also caused a performance regression for Swift native
classes. Bring back the old behavior for Swift native classes in
non-resilient modules.
Fixes <rdar://problem/29884727>.
Textual SIL was sometimes ambiguous when SILDeclRefs were used, because the textual representation of SILDeclRefs was the same for functions that have the same name, but different signatures.
Textual SIL was sometimes ambiguous when SILDeclRefs were used, because the textual representation of SILDeclRefs was the same for functions that have the same name, but different signatures.
Officially kick SILBoxType over to be "nominal" in its layout, with generic layouts structurally parameterized only by formal types. Change SIL to lower a capture to a nongeneric box when possible, or a box capturing the enclosing generic context when necessary.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
Keep in mind that these are approximations that will not impact correctness
since in all cases I ensured that the SIL will be the same after the
OwnershipModelEliminator has run. The cases that I was unsure of I commented
with SEMANTIC ARC TODO. Once we have the verifier any confusion that may have
occurred here will be dealt with.
rdar://28685236
Recently I changed the ArchetypeBuilder is minimize requirements
in generic signatures. However substitution lists still contained
all recursively-expanded nested types.
With recursive conformances, this list becomes potentially
infinite, so we can't expand it out anymore. Also, it is just
a waste of time to have them there.
This ensures that ownership is properly propagated forward through the use-def
graph.
This was the work that was stymied by issues relating to SILBuilder performing
local ARC dataflow. I ripped out that local dataflow in 6f4e2ab and added a
cheap ARC guaranteed dataflow pass that performs the same optimization.
Also in the process of doing this work, I found that there were many SILGen
tests that were either pattern matching in the wrong functions or had wrong
CHECK lines (for instance CHECK_NEXT). I fixed all of these issues and also
expanded many of the tests so that they verify ownership. The only work I left
for a future PR is that there are certain places in tests where we are using the
projection from an original value, instead of a copy. I marked those with a
message SEMANTIC ARC TODO so that they are easy to find.
rdar://28685236
Reimplement the witness matching logic used for generic requirements
so that it properly models the expectations required of the witness,
then captures the results in the AST. The new approach has a number of
advantages over the existing hacks:
* The constraint solver no longer requires hacks to try to tangle
together the innermost archetypes from the requirement with the
outer archetypes of the context of the protocol
conformance. Instead, we create a synthetic set of archetypes that
describes the requirement as it should be matched against
witnesses. This eliminates the infamous 'SelfTypeVar' hack.
* The type checker no longer records substitutions involving a weird
mix of archetypes from different contexts (see above), so it's
actually plausible to reason about the substitutions of a witness. A
new `Witness` class contains the declaration, substitutions, and all
other information required to interpret the witness.
* SILGen now uses the substitution information for witnesses when
building witness thunks, rather than computing all of it from
scratch. ``substSelfTypeIntoProtocolRequirementType()` is now gone
(absorbed into the type checker, and improved from there), and the
witness-thunk emission code is simpler. A few other bits of SILGen
got simpler because the substitutions can now be trusted.
* Witness matching and thunk generation involving generic requirements
and nested generics now works, based on some work @slavapestov was
already doing in this area.
* The AST verifier can now verify the archetypes that occur in witness substitutions.
* Although it's not in this commit, the `Witness` structure is
suitable for complete (de-)serialization, unlike the weird mix of
archetypes previously present.
Fixes rdar://problem/24079818 and cleans up an area that's been messy
and poorly understood for a very, very long time.
The function pointer is a thin function and possibly polymorphic,
so it does not really have an AST type. Instead of pretending it has
an AST type, just return a RawPointer and remove some casts in the
process.
For long names this is easier to read and in most cases the omitted information can be seen in the actual SIL code.
With the option -Xllvm -sil-full-demangle the old behavior can be restored.
We can re-abstract directly from the requirement signature to the
witness signature, now that re-abstraction thunks take an
abstraction pattern for both the input and the output.
To do this, we need to know the SILFunctionType of the witness
before we begin re-abstraction. Refactor getWitnessFunctionRef()
a bit to make this work.
And use project_box to get to the address value.
SILGen now generates a project_box for each alloc_box.
And IRGen re-uses the address value from the alloc_box if the operand of project_box is an alloc_box.
This lets the generated code be the same as before.
Other than that most changes of this (quite large) commit are straightforward.
This removes the -use-native-super-method flag and turns on dynamic
dispatch for native method invocations on super by default.
rdar://problem/22749732
Make it clear that this is not a nested type or submodule or anything.
Mangled: _TFE9ExtModuleV9DefModule1A4testfT_T_
Before: ext.ExtModule.DefModule.A.test () -> ()
After: (extension in ExtModule):DefModule.A.test () -> ()
Having a separate address and container value returned from alloc_stack is not really needed in SIL.
Even if they differ we have both addresses available during IRGen, because a dealloc_stack is always dominated by the corresponding alloc_stack in the same function.
Although this commit quite large, most changes are trivial. The largest non-trivial change is in IRGenSIL.
This commit is a NFC regarding the generated code. Even the generated SIL is the same (except removed #0, #1 and @local_storage).
Parameters (to methods, initializers, accessors, subscripts, etc) have always been represented
as Pattern's (of a particular sort), stemming from an early design direction that was abandoned.
Being built on top of patterns leads to patterns being overly complicated (e.g. tuple patterns
have to have varargs and default parameters) and make working on parameter lists complicated
and error prone. This might have been ok in 2015, but there is no way we can live like this in
2016.
Instead of using Patterns, carve out a new ParameterList and Parameter type to represent all the
parameter specific stuff. This simplifies many things and allows a lot of simplifications.
Unfortunately, I wasn't able to do this very incrementally, so this is a huge patch. The good
news is that it erases a ton of code, and the technical debt that went with it. Ignoring test
suite changes, we have:
77 files changed, 2359 insertions(+), 3221 deletions(-)
This patch also makes a bunch of wierd things dead, but I'll sweep those out in follow-on
patches.
Fixes <rdar://problem/22846558> No code completions in Foo( when Foo has error type
Fixes <rdar://problem/24026538> Slight regression in generated header, which I filed to go with 3a23d75.
Fixes an overloading bug involving default arguments and curried functions (see the diff to
Constraints/diagnostics.swift, which we now correctly accept).
Fixes cases where problems with parameters would get emitted multiple times, e.g. in the
test/Parse/subscripting.swift testcase.
The source range for ParamDecl now includes its type, which permutes some of the IDE / SourceModel tests
(for the better, I think).
Eliminates the bogus "type annotation missing in pattern" error message when a type isn't
specified for a parameter (see test/decl/func/functions.swift).
This now consistently parenthesizes argument lists in function types, which leads to many diffs in the
SILGen tests among others.
This does break the "sibling indentation" test in SourceKit/CodeFormat/indent-sibling.swift, and
I haven't been able to figure it out. Given that this is experimental functionality anyway,
I'm just XFAILing the test for now. i'll look at it separately from this mongo diff.
