This is in preparation for removing the +0 self hack.
This commit in more detail does the following:
1. It adds Formal Evaluation Scopes to certain places where the scopes were
missing. Specifically:
a. The SILGenLValue cases are places where we are invoking accessors. In each
one of these cases, we had a formal evaluation scope in the accessor
itself, but we did not have a scope that closed over the base access and
the accessor access. The base access is a formal evaluation in the sense
that just like with inout bases, we must create a new reference to the
base and re-destroy the base in a chain of accesses. This is to ensure
that we do not extend the lifetime of the base inappropriately.
b. The SILGenPoly case is a place where we have never properly placed a
Formal Evaluation Scope and have completely been relying on the +0 self
hack to make sure that archetype callees are properly destroyed
immediately after a +0 call.
2. It changes all of the places in SILGen that emit self to using formal access
cleanups instead of normal cleanups.
rdar://29791263
Officially kick SILBoxType over to be "nominal" in its layout, with generic layouts structurally parameterized only by formal types. Change SIL to lower a capture to a nongeneric box when possible, or a box capturing the enclosing generic context when necessary.
Use a syntax that declares the layout's generic parameters and fields,
followed by the generic arguments to apply to the layout:
{ var Int, let String } // A concrete box layout with a mutable Int
// and immutable String field
<T, U> { var T, let U } <Int, String> // A generic box layout,
// applied to Int and String
// arguments
Keep in mind that these are approximations that will not impact correctness
since in all cases I ensured that the SIL will be the same after the
OwnershipModelEliminator has run. The cases that I was unsure of I commented
with SEMANTIC ARC TODO. Once we have the verifier any confusion that may have
occurred here will be dealt with.
rdar://28685236
This ensures that ownership is properly propagated forward through the use-def
graph.
This was the work that was stymied by issues relating to SILBuilder performing
local ARC dataflow. I ripped out that local dataflow in 6f4e2ab and added a
cheap ARC guaranteed dataflow pass that performs the same optimization.
Also in the process of doing this work, I found that there were many SILGen
tests that were either pattern matching in the wrong functions or had wrong
CHECK lines (for instance CHECK_NEXT). I fixed all of these issues and also
expanded many of the tests so that they verify ownership. The only work I left
for a future PR is that there are certain places in tests where we are using the
projection from an original value, instead of a copy. I marked those with a
message SEMANTIC ARC TODO so that they are easy to find.
rdar://28685236
From the Swift documentation:
"If you define an optional variable without providing a default value,
the variable is automatically set to nil for you."
This flips the switch to have @noescape be the default semantics for
function types in argument positions, for everything except property
setters. Property setters are naturally escaping, so they keep their
escaping-by-default behavior.
Adds contentual printing, and updates the test cases.
There is some further (non-source-breaking) work to be done for
SE-0103:
- We need the withoutActuallyEscaping function
- Improve diagnostics and QoI to at least @noescape's standards
- Deprecate / drop @noescape, right now we allow it
- Update internal code completion printing to be contextual
- Add more tests to explore tricky corner cases
- Small regressions in fixits in attr/attr_availability.swift
Similarly to how we've always handled parameter types, we
now recursively expand tuples in result types and separately
determine a result convention for each result.
The most important code-generation change here is that
indirect results are now returned separately from each
other and from any direct results. It is generally far
better, when receiving an indirect result, to receive it
as an independent result; the caller is much more likely
to be able to directly receive the result in the address
they want to initialize, rather than having to receive it
in temporary memory and then copy parts of it into the
target.
The most important conceptual change here that clients and
producers of SIL must be aware of is the new distinction
between a SILFunctionType's *parameters* and its *argument
list*. The former is just the formal parameters, derived
purely from the parameter types of the original function;
indirect results are no longer in this list. The latter
includes the indirect result arguments; as always, all
the indirect results strictly precede the parameters.
Apply instructions and entry block arguments follow the
argument list, not the parameter list.
A relatively minor change is that there can now be multiple
direct results, each with its own result convention.
This is a minor change because I've chosen to leave
return instructions as taking a single operand and
apply instructions as producing a single result; when
the type describes multiple results, they are implicitly
bound up in a tuple. It might make sense to split these
up and allow e.g. return instructions to take a list
of operands; however, it's not clear what to do on the
caller side, and this would be a major change that can
be separated out from this already over-large patch.
Unsurprisingly, the most invasive changes here are in
SILGen; this requires substantial reworking of both call
emission and reabstraction. It also proved important
to switch several SILGen operations over to work with
RValue instead of ManagedValue, since otherwise they
would be forced to spuriously "implode" buffers.
For long names this is easier to read and in most cases the omitted information can be seen in the actual SIL code.
With the option -Xllvm -sil-full-demangle the old behavior can be restored.
And use project_box to get to the address value.
SILGen now generates a project_box for each alloc_box.
And IRGen re-uses the address value from the alloc_box if the operand of project_box is an alloc_box.
This lets the generated code be the same as before.
Other than that most changes of this (quite large) commit are straightforward.
Having a separate address and container value returned from alloc_stack is not really needed in SIL.
Even if they differ we have both addresses available during IRGen, because a dealloc_stack is always dominated by the corresponding alloc_stack in the same function.
Although this commit quite large, most changes are trivial. The largest non-trivial change is in IRGenSIL.
This commit is a NFC regarding the generated code. Even the generated SIL is the same (except removed #0, #1 and @local_storage).
Debug variable info may be attached to debug_value, debug_value_addr,
alloc_box, and alloc_stack instructions.
In order to write textual SIL -> SIL testcases that exercise the handling
of debug information by SIL passes, we need to make a couple of additions
to the textual SIL language. In memory, the debug information attached to
SIL instructions references information from the AST. If we want to create
debug info from parsing a textual .sil file, these bits need to be made
explicit.
Performance Notes: This is memory neutral for compilations from Swift
source code, because the variable name is still stored in the AST. For
compilations from textual source the variable name is stored in tail-
allocated memory following the SIL instruction that introduces the
variable.
<rdar://problem/22707128>
All refutable patterns and function parameters marked with 'var'
is now an error.
- Using explicit 'let' keyword on function parameters causes a warning.
- Don't suggest making function parameters mutable
- Remove uses in the standard library
- Update tests
rdar://problem/23378003
SILPrinter was printing uses for all SIL values, except for SIL basic blocks arguments. Fill the gap and print uses for BB arguments as well. This makes reading and analyzing SIL easier.
Basic blocks may have multiple arguments, therefore print uses of each BB argument on separate lines - one line per BB argument.
The comment containing information about uses of a BB argument is printed on the line just above the basic block name, following the approach used for function_ref and other kinds of instructions, which have additional information printed on the line above the actual instruction.
The output now looks like:
// %0 // user: %3
// %1 // user: %9
bb0(%0 : $Int32, %1 : $UnsafeMutablePointer<UnsafeMutablePointer<Int8>>):
rdar://23336589
This prevents us from seeing a less useful error message from SILGen
further down the line.
Also fix a bug where @objc without importing Foundation was not diagnosed
after the first top-level form. Some tests were relying on this behavior,
so fix those tests, either by splitting off the objc parts of the test, or
just by passing the -disable-objc-attr-requires-foundation-module flag.
Fixes <rdar://problem/20660270>.
Swift SVN r29359
This reapplies commit r27632 with additional fixes, tests.
I turned off the guaranteed struct optimization since we really don't have the
infrastructure to do it right and more importantly I don't have the time to do
so (and was not asked to do so).
We still have the class optimization though!
This means that there is one retain in ClassIntTreeMethod.find.
class ClassIntTreeNode {
let value : Int
let left, right : ClassIntTreeNode
init() {}
func find(v : Int) -> ClassIntTreeNode {
if v == value { return self }
if v < value { return left.find(v) }
return right.find(v)
}
}
Swift SVN r28264
