* Fix unnecessary one-time recompile of stdlib with -enable-ossa-flag
This includes a bit in the module format to represent if the module was
compiled with -enable-ossa-modules flag. When compiling a client module
with -enable-ossa-modules flag, all dependent modules are checked for this bit,
if not on, recompilation is triggered with -enable-ossa-modules.
* Updated tests
We should hold off actually building the binary module file until it is imported.
`canImport` queries can happen, for example, during dependency scanning, when we do not wish to have the scanner tool execute any module builds.
Resolves rdar://82603098
It's a known issue that we are using arm64e interfaces contents for the arm64 target,
meaning the encoded module flags are specifying -target arm64e-x-x instead of
-target arm64-x-x. Fortunately, we can tell the target arch from the interface file
name, so we could sanitize the target to use by inferring arch from the file name.
This mechanism allows the compiler to use a backup interface file to build into a binary module when
a corresponding interface file from the SDK is failing for whatever reasons. This mechansim should be entirely opaque
to end users except several diagnostic messages communicating backup interfaces are used.
Part of rdar://77676064
For config condition `canImport(Foo, version: N)`, this patch teaches the compiler to check N
against the version of the Swift module Foo on disk. It returns true if the module version on
disk is greater or equal to N and returns false otherwise.
Part of rdar://73992299
canImport should be able to take an additional parameter labeled by either version or
underlyingVersion. We need underlyingVersion for clang modules with Swift overlays because they
have separate version numbers. The library users are usually interested in checking the importability
of the underlying clang module instead of its Swift overlay.
Part of rdar://73992299
The locations stored in .swiftsourceinfo included the presumed file,
line, and column. When a location is requested it would read these, open
the external file, create a line map, and find the offset corresponding
to that line/column.
The offset is known during serialization though, so output it as well to
avoid having to read the file and generate the line map.
Since the serialized location is returned from `Decl::getLoc()`, it
should not be the presumed location. Instead, also output the line
directives so that the presumed location can be built as per normal
locations.
Finally, move the cache out of `Decl` and into `ASTContext`, since very
few declarations will actually have their locations deserialized. Make
sure to actually write to that cache so it's used - the old cache was
never written to.
Cursor info for a constructor would previously give the cursor info for
the containing type only. It now also adds cursor info for the
constructor itself in a "secondary_symbols" field.
Refactor `passCursorInfoForDecl` to use a single allocator rather than
keeping track of positions in a buffer and assigning everything at the
end of the function.
Refactor the various available refactoring gathering functions to take a
SmallVectorImpl and to not copy strings where they don't need to.
Resolves rdar://75385556
To help consolidate our various types describing imports, this commit moves the following types and methods to Import.h:
* ImplicitImports
* ImplicitStdlibKind
* ImplicitImportInfo
* ModuleDecl::ImportedModule
* ModuleDecl::OrderImportedModules (as ImportedModule::Order)
* ModuleDecl::removeDuplicateImports() (as ImportedModule::removeDuplicates())
* SourceFile::ImportFlags
* SourceFile::ImportOptions
* SourceFile::ImportedModuleDesc
This commit is large and intentionally kept mechanical—nothing interesting to see here.
This refactoring allows us to drop ModuleInterfaceLoader when explicit modules
are enabled. Before this change, the dependencies scanner needs the loader to be
present to access functionalities like collecting prebuilt module candidates.
In the fast dependency scanner, depending on whether a module intrface was found via the import search path or framework search path, encode into the dependency graph Swift module details, whether a given module is a framework.
In order to avoid accidentally implicitly loading modules that are expected but were not provided as explicit inputs.
- Use either SerializedModuleLoader or ExplicitSwiftModuleLoader for loading of partial modules, depending on whether we are in Explicit Module Build or Implicit Module Build mode.
-compile-module-from-interface action now takes arguments of -candidate-module-file.
If one of the candidate module files is up-to-date, the action emits a forwarding
module pointing to the candidate module instead of building a binary module.
Instead of replacing an interface file with its up-to-date compile module,
the dep-scanner should report potentially up-to-date module candidates either adjacent to
the interface file or in the prebuilt module cache. swift-driver should later pass down
these candidates to -compile-module-from-interface invocation and the front-end job
will check if one of the candidates is ready to use. The front-end job then either emits a forwarding
module to an up-to-date candidate or a binary module.
The difference with `ModuleFile` is that `ModuleFileSharedCore` provides immutable data and is independent of a particular ASTContext.
It is designed to be able to be shared across multiple `ModuleFile`s of different `ASTContext`s in a thread-safe manner.
For the explicit module mode, swift-driver uses -compile-module-from-interface to
generate modules from interfaces found by the dependency scanner. However, we don't
need to build the binary module if up-to-date modules are available, either adjacent
to the interface file or in the prebuilt module cache directory. This patch teaches
dependencies scanner to report these ready-to-use binary modules.
To support -disable-implicit-swift-modules, the explicitly built modules
are passed down as compiler arguments. We need this new module loader to
handle these modules.
This patch also stops ModuleInterfaceLoader from building module from interface
when -disable-implicit-swift-modules is set.
Using a SetVector fixes an issue where many source files imported the
same SPI group from the same module, the emitted private textual
interfaces superfluously repeated the `@_spi` attribute on the import.
rdar://problem/63681845
Module interface builder used to maintain a separate compiler instance for
building Swift modules. The configuration of this compiler instance is also
useful for dependencies scanner because it needs to emit front-end compiler invocation
for building Swift modules explicitly.
This patch refactor the configuration out to a delegate class, and the
delegate class is also used by the dependency scanner.
Additional flags in interface files may change parsing behavior like #if
statements. We should use a fresh ASTContext with these additional
flags when parsing interface files to collect imports.
rdar://62612027
Implement a new "fast" dependency scanning option,
`-scan-dependencies`, in the Swift frontend that determines all
of the source file and module dependencies for a given set of
Swift sources. It covers four forms of modules:
1) Swift (serialized) module files, by reading the module header
2) Swift interface files, by parsing the source code to find imports
3) Swift source modules, by parsing the source code to find imports
4) Clang modules, using Clang's fast dependency scanning tool
A single `-scan-dependencies` operation maps out the full
dependency graph for the given Swift source files, including all
of the Swift and Clang modules that may need to be built, such
that all of the work can be scheduled up front by the Swift
driver or any other build system that understands this
option. The dependency graph is emitted as JSON, which can be
consumed by these other tools.
We weren't handling this case, so their generated interfaces / doc info
wouldn't include symbols from the cross-import overlays, and we wouldn't
map the underscored cross-import overlay name back to the declaring
framework's name in cusor-info, completion results or when indexing.
Resolves rdar://problem/62138551
When a type (class, enum, or struct) is annotated @main, it is required
to provide a function with the following signature:
static func main() -> ()
That function will be called when the executable the type is defined
within is launched.
Query the SourceLookupCache for the operator decls,
and use ModuleDecl::getOperatorDecls for both
frontend stats and to clean up some code
completion logic.
In addition, this commit switches getPrecedenceGroups
over to querying SourceLookupCache.
Serialize derivative function configurations per module.
`@differentiable` and `@derivative` attributes register derivatives for
`AbstractFunctionDecl`s for a particular "derivative function configuration":
parameter indices and dervative generic signature.
To find `@derivative` functions registered in other Swift modules, derivative
function configurations must be serialized per module. When configurations for
a `AbstractFunctionDecl` are requested, all configurations from imported
modules are deserialized. This module serialization technique has precedent: it
is used for protocol conformances (e.g. extension declarations for a nominal
type) and Obj-C members for a class type.
Add `AbstractFunctionDecl::getDerivativeFunctionConfigurations` entry point
for accessing derivative function configurations.
In the differentiation transform: use
`AbstractFunctionDecl::getDerivativeFunctionConfigurations` to implement
`findMinimalDerivativeConfiguration` for canonical derivative function
configuration lookup, replacing `getMinimalASTDifferentiableAttr`.
Resolves TF-1100.
Introduce DirectOperatorLookupRequest &
DirectPrecedenceGroupLookupRequest that lookup
operator and precedence groups within a given
file or module without looking through imports.
These will eventually be used as the basis for the
new operator lookup implementation, but for now
just use them when querying lookup results from
serialized module files.
When a module extends a type from another module, serialize those symbols into
separated files dedicated to those extended modules. This makes it easier to
ingest and categorize those symbols under the extended module if desired.
rdar://58941718
* Remove dead ModuleSourceInfoFilename parameters
These were never actually used; we might find a way to bring them back later.
* Introduce SerializedModuleBaseName
This is intended to replace the _n_ filename parameters that tend to get passed around in the SerializedModuleLoader classes.
* Manipulate currPath in SerializedModuleLoader less often
* Don’t pass raw paths around SerializedModuleLoader
Only pass base names.
* Regularize module file opening functions
Add an alternative to getTopLevelDecls and getDeclChecked to limit which
decls are deserialized by first looking at their attributes. If the
attributes are accepted by a function passed as argument the decl is
fully deserialized, otherwise it is ignored.
The filter is included in the signature of existing functions in the
Serilalization services, but I’ve added new methods for it in FileUnit
and its subclasses to leave existing implementations untouched.
