SILOptions::EnableSerializePackage info is lost.
SILVerifier needs this info to determine whether resilience
can be bypassed for decls serialized in a resiliently
built module when Package CMO optimization enabled.
This PR adds SerializePackageEnabled bit to Module format
and uses that in SILVerifier.
Resolves rdar://126157356
we only check if the loaded module is built from a package interface. This is
not enough as a binary module could just contain exportable decls if built with
experimental-skip-non-exportable-decls, essentially resulting in content equivalent
to interface content. This might be made a default behavior so this PR requires
a module to opt in to allow non-resilient access by a participating client in the
same package.
Since it affects module format, SWIFTMODULE_VERSION_MINOR is updated.
rdar://123651270
A swiftmodule can only be correctly ingested by a compiler
that has a matching state of using or not-using
NoncopyableGenerics.
The reason for this is fundamental: the absence of a Copyable
conformance in the swiftmodule indicates that a type is
noncopyable. Thus, if a compiler with NoncopyableGenerics
reads a swiftmodule that was not compiled with that feature,
it will think every type in that module is noncopyable.
Similarly, if a compiler with NoncopyableGenerics produces a
swiftmodule, there will be Copyable requirements on each
generic parameter that the compiler without the feature will
become confused about.
The solution here is to trigger a module mismatch, so that
the compiler re-generates the swiftmodule file using the
swiftinterface, which has been kept compatible with the compiler
regardless of whether the feature is enabled.
From being a scattered collection of 'static' methods in ScanDependencies.cpp
and member methods of ASTContext. This makes 'ScanDependencies.cpp' much easier
to read, and abstracts the actual scanning logic away to a place with common
state which will make it easier to reason about in the future.
- Add a flag to the serialized module (IsEmbeddedSwiftModule)
- Check on import that the mode matches (don't allow importing non-embedded module in embedded mode and vice versa)
- Drop TBD support, it's not expected to work in embedded Swift for now
- Drop auto-linking backdeploy libraries, it's not expected to backdeploy embedded Swift for now
- Drop prespecializations, not expected to work in embedded Swift for now
- Use CMO to serialize everything when emitting an embedded Swift module
- Change SILLinker to deserialize/import everything when importing an embedded Swift module
- Add an IR test for importing modules
- Add a deserialization validation test
A @testable import allows a client to call internal decls which may
refer to non-public dependencies. To support such a use case, load
non-public transitive dependencies of a module when it's imported
@testable from the main module.
This replaces the previous behavior where we loaded those dependencies
for any modules built for testing. This was risky as we would load more
module for any debug build, opening the door to a different behavior
between debug and release builds. In contrast, applying this logic to
@testable clients will only change the behavior of test targets.
rdar://107329303
Differentiate `internal` and `fileprivate` imports from
implementation-only imports at the module-wide level to offer a
different module loading strategy. The main difference is for non-public
imports from a module with testing enabled to be loaded by transitive
clients.
Ideally, we would only load transitive non-public dependencies on
testable imports of the middle module. The current module loading logic
doesn't allow for this behavior easily as a module may be first loaded
for a normal import and extra dependencies would have to be loaded on
later imports. We may want to refactor the module loading logic to allow
this if needed.
rdar://106514965
When loading a swiftmodule A, read its package information to tell if
the current client should load A's dependencies imports by a package
import. Only clients belonging to the same package as A should load
those dependencies, clients outside of the package likely don't have
access to those dependencies.
This is specific to swiftmodules as swiftinterfaces never display a
package-only import. Clients are unaware of package dependencies when
building against a swiftinterface.
rdar://106164813
If a module was first read using the adjacent swiftmodule and then
reloaded using the swiftinterface, we would do an up to date check on
the adjacent module but write out the unit using the swiftinterface.
This would cause the same modules to be indexed repeatedly for the first
invocation using a new SDK. On the next run we would instead raad the
swiftmodule from the cache and thus the out of date check would match
up.
The impact of this varies depending on the size of the module graph in
the initial compilation and the number of jobs started at the same time.
Each SDK dependency is re-indexed *and* reloaded, which is a drain on
both CPU and memory. Thus, if many jobs are initially started and
they're all going down this path, it can cause the system to run out of
memory very quickly.
Resolves rdar://103119964.
Introduce a new flag `-export-as` to specify a name used to identify the
target module in swiftinterfaces. This provides an analoguous feature
for Swift module as Clang's `export_as` feature.
In practice it should be used when a lower level module `MyKitCore` is
desired to be shown publicly as a downstream module `MyKit`. This should
be used in conjunction with `@_exported import MyKitCore` from `MyKit`
that allows clients to refer to all services as being part of `MyKit`,
while the new `-export-as MyKit` from `MyKitCore` will ensure that the
clients swiftinterfaces also use the `MyKit` name for all services.
In the current implementation, the export-as name is used in the
module's clients and not in the declarer's swiftinterface (e.g.
`MyKitCore`'s swiftinterface still uses the `MyKitCore` module name).
This way the module swiftinterface can be verified. In the future, we
may want a similar behavior for other modules in between `MyKitCore` and
`MyKit` as verifying a swiftinterface referencing `MyKit` without it
being imported would fail.
rdar://103888618
Change the way swiftmodules built against a different SDK than their
clients are rejected. This makes them silently ignored when the module
can be rebuilt from their swiftinterface, instead of reporting a hard
error.
rdar://93257769
We now schedule conformance emissions in basically the same way
we do for types and declarations, which means that we'll emit them
uniquely in the module file instead of redundantly at every use.
This should produce substantially smaller module files overall,
especially for modules that heavily use generics. It also means
that we can remove all the unfortunate code to support using
different abbrev codes for them in different bitcode blocks.
Requirement lists are now emitted inline in the records that need
them instead of as trailing records. I think this will improve
space usage, but mostly it assists in eliminating the problem
where abbrev codes are shared between blocks.
We noticed some Swift clients rely on the serialized search paths in the module to
find dependencies and droping these paths altogether can lead to build failures like
rdar://85840921.
This change teaches the serialization to obfuscate the search paths and the deserialization
to recover them. This allows clients to keep accessing these paths without exposing
them when shipping the module to other users.
We've recently added the -experimental-hermetic-seal-at-link compiler flag,
which turns on aggressive dead-stripping optimizations and assumes that library
code can be optimized against client code because all users of the library
code/types are present at link/LTO time. This means that any module that's
built with -experimental-hermetic-seal-at-link requires all clients of this
module to also use -experimental-hermetic-seal-at-link. This PR enforces that
by storing a bit in the serialized module, and checking the bit when importing
modules.
* Fix unnecessary one-time recompile of stdlib with -enable-ossa-flag
This includes a bit in the module format to represent if the module was
compiled with -enable-ossa-modules flag. When compiling a client module
with -enable-ossa-modules flag, all dependent modules are checked for this bit,
if not on, recompilation is triggered with -enable-ossa-modules.
* Updated tests
Serialize the canonical name of the SDK used when building a swiftmodule
file and use it to ensure that the swiftmodule file is loaded only with
the same SDK. The SDK name must be passed down from the frontend.
This will report unsupported configurations like:
- Installing roots between incompatible SDKs without deleting the
swiftmodule files.
- Having multiple targets in the same project using different SDKs.
- Loading a swiftmodule created with a newer SDK (and stdlib) with an
older SDK.
All of these lead to hard to investigate deserialization failures and
this change should detect them early, before reaching a deserialization
failure.
rdar://78048939
Rework Sendable checking to be completely based on "missing"
conformances, so that we can individually diagnose missing Sendable
conformances based on both the module in which the conformance check
happened as well as where the type was declared. The basic rules here
are to only diagnose if either the module where the non-Sendable type
was declared or the module where it was checked was compiled with a
mode that consistently diagnoses `Sendable`, either by virtue of
being Swift 6 or because `-warn-concurrency` was provided on the
command line. And have that diagnostic be an error in Swift 6 or
warning in Swift 5.x.
There is much tuning to be done here.
Rather than outputting diagnostics and to stderr, output all the extra
information added when deserialization fatally fails to the pretty stack
trace instead. Since the pretty stack trace is added to crash logs, this
should avoid the dance of requesting the compiler output
- Moves the previous "**** DESERIALIZATION FAILURE ..." output to the
last pretty stack trace line
- Removes the module and compiler version notes added to the fatal
diagnostic
- Adds a new effective compiler version line for all frontend failure.
Somewhat duplicates the line from the driver, but adds in the
effective version
- Adds a new line for the full misc version of the module that failed.
May double up with previous "While reading from ..." lines that are
added in various deserialization methods, but better to have it
twice than not at all
If the `-static` option is specified, store that in the generated
swiftmodule file. When de-serializing, recover this information in the
representative SILModule.
This will be used for code generation on Windows. It is the missing
piece to allow static linking to function properly. It additionally
opens the path to additional optimization on ELF-ish targets - GOT, PLT
references can be avoided when the linked module is known to be static.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
This allows library authors to pass down a project version number so that library users can conditionally
import that library based on the available version in the search paths.
Needed for rdar://73992299
Introduce a new compiler flag `-module-abi-name <name>` that uses the
given name as the ABI name for the module (rather than the module's
name in source code). The ABI name impacts name mangling and metadata.
Adds a new frontend option
"-experimental-allow-module-with-compiler-errors". If any compilation
errors occur while generating the .swiftmodule, this mode will skip SIL
entirely and only serialize the (likey invalid) AST.
This existence of this option during generation is serialized into the
resulting .swiftmodule. Errors found in deserialization are only allowed
if it is set.
Primarily intended for IDE requests (eg. indexing and code completion)
to ensure robust cross-module results, despite possible errors.
Resolves rdar://69815975
* Add properties to ModuleFile which holds information from the control
block.
* 'ExtendedValidationInfo' parameter for 'ModuleFileSharedCore::load()'
cannot be 'nullptr'. Make it non-defaulted Rvalue reference.
'ModuleInterfacePath' is passed as 'StringRef' that memory used to
reside in ASTContext. But 'ModuleFileSharedCore' should be 'ASTContext'
independent. So copy it using its own allocator.
