[ Upstream commit 337b1b566d ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe96 ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91c4c89db4 ]
pbus_reassign_bridge_resources() saves bridge windows into the saved
list before attempting to adjust resource assignments to perform a BAR
resize operation. If resource adjustments cannot be completed fully,
rollback is attempted by restoring the resource from the saved list.
The rollback, however, does not check whether the resources it restores were
assigned by the partial resize attempt. If restore changes addresses of the
resource, it can result in corrupting the resource tree.
An example of a corrupted resource tree with overlapping addresses:
6200000000000-6203fbfffffff : pciex@620c3c0000000
6200000000000-6203fbff0ffff : PCI Bus 0030:01
6200020000000-62000207fffff : 0030:01:00.0
6200000000000-6203fbff0ffff : PCI Bus 0030:02
A resource that are assigned into the resource tree must remain
unchanged. Thus, release such a resource before attempting to restore
and claim it back.
For simplicity, always do the release and claim back for the resource
even in the cases where it is restored to the same address range.
Note: this fix may "break" some cases where devices "worked" because
the resource tree corruption allowed address space double counting to
fit more resource than what can now be assigned without double
counting. The upcoming changes to BAR resizing should address those
scenarios (to the extent possible).
Fixes: 8bb705e3e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe96 ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f865a57896 ]
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series.
Fixes: b099631df1 ("PCI: mediatek: Add controller support for MT2712 and MT7622")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # 5.10
Cc: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://patch.msgid.link/20260521174617.17692-1-mani@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a103d2dede ]
All irq_domain functions now accept fwnode instead of of_node. But many
PCI controllers still extract dev to of_node and then of_node to fwnode.
Instead, clean this up and simply use the dev_fwnode() helper to extract
fwnode directly from dev. Internally, it still does dev => of_node =>
fwnode steps, but it's now hidden from the users.
In the case of altera, this also removes an unused 'node' variable that is
only used when CONFIG_OF is enabled:
drivers/pci/controller/pcie-altera.c: In function 'altera_pcie_init_irq_domain':
drivers/pci/controller/pcie-altera.c:855:29: error: unused variable 'node' [-Werror=unused-variable]
855 | struct device_node *node = dev->of_node;
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # altera
[bhelgaas: squash together, rebase to precede msi-parent]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250521163329.2137973-1-arnd@kernel.org
Link: https://patch.msgid.link/20250611104348.192092-16-jirislaby@kernel.org
Link: https://patch.msgid.link/20250723065907.1841758-1-jirislaby@kernel.org
Stable-dep-of: f865a57896 ("PCI: mediatek: Fix IRQ domain leak when port fails to enable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2365a63b0 ]
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime
Fixes: 61a2f1460f ("vfio/mlx5: Manage the VF attach/detach callback from the PF")
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Fixes: f886473071 ("vfio/mlx5: Add support for tracker object change event")
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-5-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7a94138cae ]
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
Fixes: c63aed7334 ("PCI: altera: Use pci_host_probe() to register host")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-3-mahesh.vaidya@altera.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55052184ac ]
st_sensors_read_axis_data() unconditionally decoded multi-byte
results with get_unaligned_le16() / get_unaligned_le24() regardless
of the channel's declared scan_type.endianness.
For every ST sensor that has used this helper since it was introduced
this happened to be fine because the ST IMU/accel/gyro/pressure
families publish their data registers as little-endian and the
channel specs in those drivers declare IIO_LE accordingly.
The LSM303DLH magnetometer however publishes its X/Y/Z output as a
pair of big-endian bytes (the H register sits at the lower address,
0x03/0x05/0x07, and the L register immediately after), and its
channel specs in st_magn_core.c correctly declare IIO_BE -- but
read_axis_data() ignored that and decoded as little-endian, swapping
the high and low bytes of every magnetometer sample. The LSM303DLHC
and LSM303DLM share the same st_magn_16bit_channels (IIO_BE) and
were therefore byte-swapped by the same bug; users of those parts
will see different in_magn_*_raw values after this fix lands.
The bug is most visible on a stationary chip: in earth's field the
true X reading is small and the high byte sits at 0x00, so swapping
the bytes pins sysfs X at exactly the low byte's pattern (e.g. 0x00F0
= 240). Y and Z still appear "to vary" because their magnitudes are
larger and the noise in the low byte produces big swings in the
swapped high byte:
before (LSM303DLH flat, sysfs in_magn_*_raw):
X=240 (stuck), Y= 12032..23296, Z=-16128..-9728
after (direct i2c-dev big-endian decode, same chip same orientation):
X≈-4096, Y≈210, Z≈80 (sensible values reflecting earth's
ambient field at low gauss range)
Fix read_axis_data() to dispatch on ch->scan_type.endianness and
call get_unaligned_be16() / get_unaligned_be24() when the channel
declares IIO_BE. Existing IIO_LE consumers (st_accel, st_gyro,
st_pressure, st_lsm6dsx and others) are unaffected because their
channel specs already declare IIO_LE and the LE path is unchanged.
While restructuring the branches, replace the previously implicit
silent-success-with-uninitialised-*data fall-through for
byte_for_channel outside 1..3 with an explicit return -EINVAL. No
in-tree ST sensor publishes such a channel, but the new behaviour
is strictly safer than handing userspace garbage.
Fixes: 23491b513b ("iio:common: Add STMicroelectronics common library")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7 sparse smatch clang-analyzer coccinelle checkpatch
Assisted-by: Sashiko:claude-opus-4-7
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7d8296b250 ]
Avoid open-coding that simple expression each time by moving
BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export
it to the rest of the kernel.
Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always
equals to %BITS_PER_BYTE, regardless of the target architecture.
Do the same for the tools ecosystem as well (incl. its version of
bitops.h). The previous implementation had its implicit type of long,
while the new one is int, so adjust the format literal accordingly in
the perf code.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 55052184ac ("iio: common: st_sensors: honour channel endianness in read_axis_data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fbe67ff37a ]
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced.
Fixes: 0c3a333524 ("iio: pressure: mpl115: Implementing low power mode by shutdown gpio")
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Assisted-by: Claude:claude-opus-4-8 coccinelle
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
[ moved pm_runtime_mark_last_busy() together with pm_runtime_put_autosuspend() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit affe3f077d ]
Timestamps are made by measuring the chip clock using the watermark
interrupts. If we read more than watermark samples as done today, we
are reducing the period between interrupts and distort the time
measurement. Fix that by reading only watermark samples in the
interrupt case.
Fixes: 7f85e42a6c ("iio: imu: inv_icm42600: add buffer support in iio devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7bd473632 ]
Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the
hard handler during the thread handler. And compute and use the
effective watermark value that correspond to this first timestamp.
This way we can ensure the timestamp is always corresponding to the
value used by the timestamping mechanism. Otherwise, it is possible
that between FIFO count read and FIFO processing the timestamp is
overwritten in the hard handler.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf8367b00c ]
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes: 0ecc363cce ("iio: make invensense timestamp module generic")
Cc: Stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ce8d099e0 ]
When reading the raw quaternion attribute (in_rot_quaternion_raw), the
driver currently returns either all zeros (if the sensor was never enabled)
or stale data (if the sensor was previously enabled) because it reads from
the internal buffer without explicitly requesting a new sample from the
sensor.
To fix this, power up the sensor, call sensor_hub_input_attr_read_values()
to issue a synchronous GET_REPORT and receive the full quaternion data
directly into a local buffer, then decode the four components.
Fixes: fc18dddc06 ("iio: hid-sensors: Added device rotation support")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e1b9bff12 ]
devm_adis_probe_trigger() registers iio_trigger_generic_data_rdy_poll()
through devm_request_irq() on the non-FIFO path, but it does not add
IRQF_NO_THREAD to the IRQ flags.
When the kernel is booted with forced IRQ threading, the parent IRQ can
otherwise be threaded by the IRQ core and the subsequent IIO trigger
child IRQ is then dispatched from irq/... thread context instead of
hardirq context. Because iio_trigger_generic_data_rdy_poll()
immediately drives iio_trigger_poll(), this violates the hardirq-only
IIO trigger helper contract and can push downstream trigger consumers
through the wrong execution context.
Add IRQF_NO_THREAD on top of the existing adis->irq_flag value for the
non-FIFO request_irq() path, while preserving the current trigger
polarity and IRQF_NO_AUTOEN behavior.
Fixes: fec86c6b83 ("iio: imu: adis: Add Managed device functions")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 18a00ed0e7 ]
After commit 9b311b7313 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), ACPI NFIT driver removal may deadlock if an ACPI
notify on the NFIT device is triggered concurrently. A similar deadlock
may occur if an ACPI notify on the NFIT device is triggered during a
failing driver probe.
The deadlock is possible because acpi_dev_remove_notify_handler() calls
acpi_os_wait_events_complete() after removing the notify handler and the
driver core invokes it under the NFIT platform device lock which is also
acquired by acpi_nfit_notify(). Thus acpi_os_wait_events_complete() may
be waiting for acpi_nfit_notify() to complete, but the latter may not be
able to acquire the device lock which is being held by the driver core
while the former is being executed.
Moreover, after commit 03667e146f ("ACPI: NFIT: core: Convert the
driver to a platform one"), there are no sysfs notifications regarding
NVDIMM devices because __acpi_nvdimm_notify() always bails out after
checking the driver data pointer of the device's parent. That parent
is the ACPI companion of the platform device used for driver binding,
so its driver data pointer is always NULL after the commit in question
which was overlooked by it.
A remedy for the deadlock is to use a special separate lock for ACPI
notify synchronization with driver probe and removal instead of the
device lock of the NFIT device, while a remedy for the second issue
is to populate the driver data pointer of the NFIT device's ACPI
companion when the driver is ready to operate, so do both these things.
However, since the new lock is not held across the entire teardown and
acpi_nfit_notify() should do nothing when teardown is in progress, make
it check the driver data pointer of the NFIT device's ACPI companion, in
analogy with the existing check in __acpi_nvdimm_notify(), and bail out
if that pointer is NULL.
Fixes: 9b311b7313 ("ACPI: NFIT: Install Notify() handler before getting NFIT table")
Fixes: 03667e146f ("ACPI: NFIT: core: Convert the driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org> # 9995e4404e: ACPI: NFIT: core: Eliminate redundant local variable
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/3420096.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 198541ad53 ]
Now that devm_acpi_install_notify_handler() is available, use it in
acpi_nfit_probe() instead of a custom devm action removing an ACPI
notify handler installed via acpi_dev_install_notify_handler().
Also drop the explicit ACPI_COMPANION() check against NULL that is
not necessary any more becuase devm_acpi_install_notify_handler()
carries out an equivalent check internally and use ACPI_HANDLE() to
retrieve the platform device's ACPI handle.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3048737.e9J7NaK4W3@rafael.j.wysocki
Stable-dep-of: 18a00ed0e7 ("ACPI: NFIT: core: Fix possible deadlock and missing notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca70ce555a ]
Introduce devm_acpi_install_notify_handler() for installing an ACPI
notify handler managed by devres that will be removed automatically on
driver detach.
It installs the notify handler on the device object in the ACPI
namespace that corresponds to the owner device's ACPI companion, if
present (an error is returned if the owner device doesn't have an ACPI
companion).
Currently, there is no way to manually remove the notify handler
installed by it because none of its users brought on subsequently
will need to do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Kerneldoc comment refinement ]
Link: https://patch.msgid.link/2268031.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18a00ed0e7 ("ACPI: NFIT: core: Fix possible deadlock and missing notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e4865a56d0 ]
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4516068.ejJDZkT8p0@rafael.j.wysocki
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
Stable-dep-of: 18a00ed0e7 ("ACPI: NFIT: core: Fix possible deadlock and missing notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38bf27511e ]
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus.
Fixes: a61fe6f790 ("nfit, tools/testing/nvdimm: unify common init for acpi_nfit_desc")
Fixes: fbabd829fe ("acpi, nfit: fix module unload vs workqueue shutdown race")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/1963615.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47915e855f upstream.
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries
such as SYSRET/interrupt returns for which the branch-from addresses
are in the kernel.
E.g.
$ perf record -j any,u -c 4000 -e branch-brs -o - -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//-
0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//-
0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//-
...
BRS provides no hardware branch filtering, so privilege level
filtering is performed entirely in software. However, amd_brs_match_plm()
only validates the branch-to address against the requested privilege
levels. For branches from the kernel to user space, the branch-from
address is left unchecked and is leaked. Extend the software filter to
also validate the branch-from address, so that any branch record whose
branch-from address is in the kernel is dropped when
PERF_SAMPLE_BRANCH_USER is requested.
Fixes: 8910075d61 ("perf/x86/amd: Enable branch sampling priv level filtering")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://patch.msgid.link/f05931c4f89a146c364bd5dc6b8170b1ac611c65.1783701239.git.sandipan.das@amd.com
Closes: https://lore.kernel.org/all/20260710110235.F3FD81F000E9@smtp.kernel.org/
[sandipan: backport to linux-6.6.y]
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17a8ce8496 upstream.
lpc32xx_xmit_dma() waits for the DMA completion callback but ignores
wait_for_completion_timeout(). A timed out DMA transfer is therefore
unmapped and reported as successful to the NAND read/write path.
Return -ETIMEDOUT when the completion wait expires. Terminate the DMA
channel before unmapping the scatterlist so the timed out transfer cannot
continue to access the buffer after the error is returned.
Fixes: 2944a44da0 ("mtd: add LPC32xx SLC NAND driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbf590b662 upstream.
lpc32xx_xmit_dma() starts a DMA transfer and waits up to one second
for its completion, but it ignores the wait result and returns success
after unmapping the buffer.
A timed out read can therefore return success with incomplete data, and
a timed out write can continue the NAND operation without proof that the
DMA payload reached the controller.
Terminate the DMA channel on timeout, unmap the scatterlist through the
existing cleanup path, and return -ETIMEDOUT to the NAND read/write
callers. Initialize the shared cleanup-path result before using it for
dmaengine_prep_slave_sg() failures.
Fixes: 70f7cb78ec ("mtd: add LPC32xx MLC NAND driver")
Cc: stable@vger.kernel.org
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9a13e05a3 upstream.
fsl_ifc_run_command() logs controller timeout and other non-OPC
completion states in ctrl->nand_stat. fsl_ifc_read_page() then only
increments the ECC failure counter for non-OPC status and still returns
max_bitflips, which can be zero.
Return -ETIMEDOUT when the command did not complete at all and -EIO for
other non-OPC read completions so the NAND core does not treat a failed
page read as a clean page.
Fixes: 82771882d9 ("NAND Machine support for Integrated Flash Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee5fb641c4 upstream.
vub300_cmndwork_thread() holds cmd_mutex while it sends a command and
waits for the command response. If the response wait times out,
__vub300_command_response() kills the command URBs and then synchronously
resets the USB device through usb_reset_device().
That reset path re-enters the driver through vub300_pre_reset(), which
also takes cmd_mutex. The worker therefore tries to acquire the same
mutex recursively while it is still holding it from the command path.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real worker and timeout/reset carrier:
vub300_cmndwork_thread()
__vub300_command_response()
usb_lock_device_for_reset()
usb_reset_device()
vub300_pre_reset()
Lockdep reported the same-task recursive acquisition on cmd_mutex:
WARNING: possible recursive locking detected
... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv]
... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv]
Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv]
*** DEADLOCK ***
Return a flag from __vub300_command_response() when the timeout path needs
a device reset, then perform the reset after vub300_cmndwork_thread() has
cleared the in-flight command state and dropped cmd_mutex. The reset is
still attempted before mmc_request_done(), preserving the existing request
completion ordering while avoiding the recursive lock.
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d322e40f4e upstream.
The driver stores chip capacity information in both the OF match table
and the SPI id table. Probe currently uses of_device_get_match_data(),
so a non-OF SPI modalias match falls back to mchp23k256_caps even when
the SPI id table selected a different part.
Use spi_get_device_match_data() so SPI id-table driver_data is consumed
when OF match data is absent. This keeps the existing default fallback
while avoiding the wrong MTD geometry for id-table-only matches.
Fixes: 4379075a87 ("mtd: mchp23k256: Add support for mchp23lcv1024")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d03a19bd6c upstream.
The S5PC110 OneNAND DMA helpers have bounded waits for transfer
completion. The polling helper falls out of its timeout loop and returns
success, and the IRQ helper ignores wait_for_completion_timeout().
Return -ETIMEDOUT when the DMA transfer-done bit or completion does not
arrive before the timeout so callers can treat the buffer transfer as
failed.
Fixes: e23abf4b77 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d78a407bad upstream.
In order for the firmware to sleep, the driver has to confirm a
previously received sleep request. The normal sequence of evets goes
like this:
EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm
-> SLEEP -> EVENT_AWAKE -> AWAKE.
Before sending the sleep-confirm command, the driver must make sure
there are no commands either running or waiting to be completed.
mwifiex_ret_802_11_associate() unconditionally sets
ps_state = PS_STATE_AWAKE when it processes the association command
response, outside of the normal powersave management flow. If
EVENT_SLEEP arrives while the association command is in flight,
ps_state is PRE_SLEEP when the association command response is parsed,
and the forced AWAKE overwrites it. The deferred sleep-confirm is
never sent.
A subsequent scan_start command is correctly acknowledged, but the
firmware doesn't generate scan_result events. The scan request never
finishes, and additional requests from userspace fail with -EBUSY.
After testing on both IW412 and W8997, I could only trigger the bug on
the IW412 and observed the firmwares behave differently. On the IW412
the firmware still sends EVENT_SLEEP while the authentication /
association process is ongoing. A W8997 under the same
conditions seems to suppress power-save for the duration of the
association, so PRE_SLEEP never coincided with the association response
even after extended periods of testing using the loops
described below (>12hours).
On the IW412, the delay between commands that triggers an EVENT_SLEEP
was empirically determined to be ~20ms. This delay can naturally occur
when the driver is outputting debugging information
(debug_mask = 0x00000037), in which situation the busy scans issue is
repeatable while running "test 1)" as described below. If the delay
between commands is less than ~20ms, the firmware stays awake and
the issue was not reproducible running the same test.
The host_mlme=false path also behaves differently. In this case, the
entire authentication / association transaction is executed by one
command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit
EVENT_SLEEP while the command is running.
Remove the assignment so the ps_state is only manipulated in the paths
that are related to powersave event handling and on the main workqueue
for correct sleep confirmation.
The following loop tests were performed (with debugging output enabled):
1) force roaming between two AP's, one 5GHz and one 2.4GHz, same
SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s
between iterations.
2) force a disconnection to AP 1 and a connection to AP 2, test
scan. Use wpa_cli to trigger the connection changes, sleep 2s
between iterations.
Each test ran in each device for at least 3 hours.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20260612122547.1586872-2-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47b87f469a upstream.
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault().
Fixes: a352894d07 ("spufs: use new vm_ops->access to allow local state access from gdb")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/SYBPR01MB7881EE775E8B51C09F5A29E7AF152@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a8c89f8c1 upstream.
In sunxi_reset_init(), when ioremap() fails, the memory region obtained
via request_mem_region() is not released, leading to a resource leak.
Add an err_mem_region label to properly release the memory region before
freeing the data structure.
Fixes: 8f1ae77f46 ("reset: Add Allwinner SoCs Reset Controller Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3fe4cbd58 upstream.
Sashiko reports for more incorrect IPv6 transport offsets.
The app code for TCP was assuming IPv4 network header
even after the ipvsh argument was provided. This can
cause problems with apps over IPv6. As for the only
official app in the kernel tree (FTP) this problem is
harmless because we use Netfilter to mangle the FTP
ports and we do not adjust the TCP seq numbers.
Also, provide correct offset of the ICMPV6 header in
ip_vs_out_icmp_v6() for correct checksum checks when
the IPv6 packet has extension headers.
Fixes: d12e12299a ("ipvs: add ipv6 support to ftp")
Fixes: 2a3b791e6e ("IPVS: Add/adjust Netfilter hook functions and helpers for v6")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260706101624.69471-1-zhaoyz24%40mails.tsinghua.edu.cn
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718178f524 upstream.
msb_ftl_initialize() computes the zone count from the card block count
with no bound:
msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE;
...
for (i = 0; i < msb->zone_count; i++)
msb->free_block_count[i] = MS_BLOCKS_IN_ZONE;
msb->block_count is a card value. msb_read_boot_blocks() reads
number_of_blocks from the card boot page and byte swaps it.
free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the
valid indices are 0 to 15. The init loop above indexes it by zone_count.
msb_mark_block_used() and msb_mark_block_unused() index it by
pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report
up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES *
MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past
free_block_count[] and corrupts struct msb_data. A larger count runs the
init loop past the end too.
A real Memory Stick has at most 16 zones. So it has at most 8192 blocks.
msb_ftl_initialize() now rejects a card that reports more than
MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks.
Fixes: 0ab30494bc ("memstick: add support for legacy memorysticks")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7410d11460 upstream.
When a MACsec interface with IFF_PROMISC set is brought up on top of a
device that has hardware offload enabled, macsec_dev_open() first calls
dev_set_promiscuity(real_dev, 1) and then propagates the open to the
offload device. If that propagation fails, the error path jumps to the
clear_allmulti label, which only reverts allmulti and the unicast
address. The promiscuity taken on the lower device is never dropped, so
real_dev is left permanently stuck in promiscuous mode. Its promiscuity
count can no longer be balanced from software.
Add a clear_promisc label that drops the promiscuity reference and
route the two offload failure paths to it. The dev_set_promiscuity()
failure itself still jumps to clear_allmulti, since on that failure the
count was not incremented.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260705113629.187490-1-jamestiotio@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c72eb6286 upstream.
llc_sap_add_socket() takes a SAP reference for each socket added to a SAP,
and llc_sap_remove_socket() releases it. llc_create_incoming_sock() takes
an additional SAP reference after adding the child socket.
This extra reference was balanced by an explicit llc_sap_put() in
llc_ui_release() until commit 3100aa9d74 ("llc: fix SAP reference
counting w.r.t. socket handling") removed that put. The corresponding hold
in the accept path was left behind.
When such a child socket is removed, only the reference taken by
llc_sap_add_socket() is released. The extra reference keeps the SAP alive
after its last socket is removed. Remove the obsolete hold.
Fixes: 3100aa9d74 ("llc: fix SAP reference counting w.r.t. socket handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260712130343.518797-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 609c5b04a2 upstream.
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch.
Fixes: db33c77ddd ("Bluetooth: btrtl: Create separate module for Realtek BT driver")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f1f755366 upstream.
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3 ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validated. In particular, an oversized
nested CLONE/CT action may cause subsequent bytes in the generated
stream to be interpreted as independent actions.
Keep the larger total-action-stream behavior, but make nested action
close reject generated containers that do not fit in nla_len, and return
the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and
CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse
construction order before discarding failed wrappers, so resources copied
into the rejected tails are released before the wrappers are removed.
Most failed outer wrappers are discarded by truncating actions_len after
child resources have been released. CHECK_PKT_LEN also trims its parent
after branch resources are gone. SET/TUNNEL close failures unwind their
known tun_dst ownership directly, and SET_TO_MASKED has no external
ownership and truncates on close failure.
Fixes: a1e64addf3 ("net: openvswitch: remove misbehaving actions length check")
Cc: stable@vger.kernel.org
Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260706094336.38639-1-manizada@pm.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50dce2e2f8 upstream.
The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT
(Interrupt Request Status) register layout documented in Table 15
of the LTC3676/LTC3676-1 datasheet:
bit 0 - Pushbutton Status Active
bit 1 - Hard Reset Occurred
bit 2 - PGOOD Timeout Occurred
bit 3 - Undervoltage Warning
bit 4 - Undervoltage Standby (Fault) Occurred
bit 5 - Overtemperature Warning
bit 6 - Overtemperature Standby (Fault) Occurred
bit 7 - Reserved
The driver instead defines these starting at bit 3, one bit higher
than the datasheet specifies, which causes ltc3676_regulator_isr()
to check the wrong status bits and misreport (or miss) PGOOD
timeout, undervoltage and thermal warning/fault conditions.
Fix the bit offsets to match the datasheet.
Fixes: 37b918a034 ("regulator: Add LTC3676 support")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Ojha <Abhishek.ojha@savoirfairelinux.com>
Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95fc02722e upstream.
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed.
Fixes: 09b4a4faf9 ("mac80211: introduce capability flags for VHT EXT NSS support")
Cc: stable@vger.kernel.org
Reviewed-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260706143507.146131-1-dawei.feng@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 536fb3d739 upstream.
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.
Fixes: 1ebbc48520 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.")
Fixes: 0439f5367c ("rt2x00: Move TX/RX work into dedicated workqueue")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25e252bcf1 upstream.
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72422525f6 upstream.
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen
Manivannan Sadhasivam
Christian Marangi
Jiri Slaby (SUSE)
Richard Zhu
Alex Williamson
Mahesh Vaidya
Zhao Dongdong
Herman van Hazendonk
Alexander Lobakin
Biren Pandya
Jean-Baptiste Maneyrol
Colin Ian King
Zhang Lixu
Runyu Xiao
Rafael J. Wysocki
Sandipan Das
Pengpeng Hou
Rafael Beims
Zhiling Zou
Junrui Luo
Florian Westphal
Julian Anastasov
Maoyi Xie
James Raphael Tiovalen
Xuanqiang Luo
Laxman Acharya Padhya
Asim Viladi Oglu Manizada
Abhishek Ojha
Dawei Feng
Thorsten Blum
Peng Fan
Farhad Alemi