sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
Fixes: f5b321bd37 ("netfilter: nf_conntrack_sip: add TCP support")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/netfilter-devel/20260712234201.3213635-1-xmei5@asu.edu
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-wmi: Revert retaining battery charge threshold on boot due to
userspace regression.
Userspace assumed (errorneously) a non-zero return code from sysfs
read implies feature is not supported but the correct way would be to
check file visibility instead. This results in the kernel change
breaking the functionality completely. Thus, we are taking timeout on
the kernel side to allow userspace to sort their problem first.
- intel/vsec: Free ACPI discovery data allocation on error paths
* tag 'platform-drivers-x86-v7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: temporarily revert to setting a charge limit
platform/x86/intel/vsec: free ACPI discovery data on early errors
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers.
Fixes: 1a8a63a530 ("net: hsr: Add VLAN CTAG filter support")
Reported-by: syzbot+456957213f32970c0762@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a4cb6ca.57639fcc.86d58.000b.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260721101240.995597-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
net: bridge: fix vlan range dumps starting with a PVID
Patch 01 fixes a bug that can skip dumping VLANs which a part of a range
starting with a PVID VLAN and share the same flags. PVID VLAN should be
always on its own. Patch 02 adds a selftest for this case. More information
can be found in the respective patches.
====================
Link: https://patch.msgid.link/20260721140922.682265-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a bug in all range dumps that rely on br_vlan_can_enter_range()
when the PVID is a range starting VLAN, all following VLANs that match
its flags can enter the range, but when the range is filled in only the
PVID VLAN is dumped and the rest of the range is discarded because
br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can
be only one, we need to break ranges around it, the best way to do that
consistently for all is to alter br_vlan_can_enter_range() to take into
account the PVID and return false to break the range when it's matched.
Before the fix:
$ ip l add br0 type bridge vlan_filtering 1
$ ip l add dumdum type dummy
$ ip l set dumdum master br0
$ ip l set br0 up
$ ip l set dumdum up
$ bridge vlan add dev dumdum vid 1 pvid untagged master
$ bridge vlan add dev dumdum vid 2 untagged master
$ bridge vlan show dev dumdum # use legacy dump to show all vlans
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
VLAN 2 is missing, and if there are more matching VLANs afterwards
they'd be missing too.
After the fix:
[ same setup steps ]
$ bridge vlan show dev dumdum
port vlan-id
dumdum 1 PVID Egress Untagged
2 Egress Untagged
$ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN)
port vlan-id
dumdum 1 PVID Egress Untagged
state forwarding mcast_router 1
2 Egress Untagged
state forwarding mcast_router 1
Fixes: 0ab5587951 ("net: bridge: vlan: add rtm range support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of fixes that have been accumulated recently.
The amount is still "new normal", but all small fixes. Mostly
hardware-specific quirks, but including a few core fixes, too.
ALSA Core:
- Fix potential UAF and race fixes in ALSA timer core
- Fix sequencer queue timer cleanup to prevent leaks and double-free
HD-audio:
- Fix silent streams with Intel HDMI keep-alive silent mode
- Quirks for HP laptops (Pavilion x360, EliteBook 830 G8, ZBook 8
G2a), Samsung 750XBE/730XBE, and Dell Pro QC1255, Alienware x16 R2,
Lunnen Ground 14
- Properly validate ACPI mute object in CS35L41 HDA companion driver
- Reset calibration data size on failure in TAS2781 HDA driver.
USB-audio:
- Support FIXED_RATE quirk for JBL Quantum650 Wireless USB headset
ASoC:
- Intel SOF SoundWire board driver quirks for new Dell laptops
- DMI overrides and quirks for AMD ACP/YC platforms, including new
ASUS TUF platforms and MSI Vector A16 HX laptops
- Skip sysclk reset for active DAIs in shutdown for FSL imx-card
- Fix spurious BCLK on resume by clearing BYP in FSL SAI driver
- Add playback-only quirk for H616 codec in Allwinner driver
- Fix Cirrus Logic CS35L56 potential probe deadlock
- Fix cache write-through on resume in FS210X codec
- Bound firmware description string parsing in TAS2781 codec driver
- Fix duplicate DAPM widget names for wideband DAI in BT-SCO codec"
* tag 'sound-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/realtek - Add quirk for Dell Pro QC1255
ALSA: hda/tas2781: clear cali_data.total_sz when calibration read fails
ALSA: hda/realtek: Add HDA_CODEC_QUIRK for Samsung 750XBE/730XBE
ALSA: hda/realtek: Fix speakers on Lunnen Ground 14
ALSA: timer: drain a slave's callback before its master detaches it
ALSA: timer: don't re-enter an instance callback that is still running
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum650 Wireless
ALSA: hda/realtek: Add quirk for HP Pavilion x360
ASoC: Intel: sof_sdw: Add quirks for new Dell laptops
ASoC: cs35l56: Use complete_all() to signal init_completion
ASoC: cs35l56: Fix potential probe() deadlock
ASoC: fs210x: Make cache write through again during resume
ALSA: hda/realtek: Add inverted LED quirk for HP ZBook 8 G2a
ALSA: hda: codecs: hdmi: disable keep-alive before audio format change
ASoC: bt-sco: fix duplicate DAPM widget names for wideband DAI
ALSA: hda: cs35l41: validate and free ACPI mute object
ALSA: hda/realtek: Fix speakers on Alienware x16 R2
ALSA: hda/realtek: Add quirk for HP EliteBook 830 G8 (8AB8) to enable mute LEDs
ASoC: amd: yc: Add DMI quirk for MSI Vector A16 HX A8WIG
ASoC: fsl: imx-card: Skip sysclk reset for active DAIs in shutdown
...
Johannes Berg says:
====================
Lots of fixes:
- mostly driver security/robustness/warning fixes
- ath12k: fix MLO throughput regression
- iwlwifi: add UNII-9 to avoid regression
- brcmfmac:
- fix 802.1X-SHA256
- SDIO fix for some boards
- mac80211:
- fix traffic indication for sleeping STAs
- fix NAN throughput
* tag 'wireless-2026-07-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (80 commits)
wifi: brcmfmac: fix 802.1X-SHA256 call trace warning
wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht()
wifi: mt76: mt7925: fix crash in reset link replay
wifi: mt76: fix airoha_npu dependency tracking
wifi: mt76: restrict NPU/PPE active checks to MMIO devices
wifi: mt76: fix MAC address for non OF pcie cards
wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap()
wifi: mt76: mt7925: fix possible NULL-pointer deref in mt7925_mcu_bss_he_tlv()
wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv()
wifi: mt76: mt7915: guard HE capability lookups
wifi: mt76: mt7925: guard link STA in decap offload
wifi: mt76: Disable napi when removing device
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
wifi: brcmfmac: set F2 blocksize to 256 for BCM43752
wifi: cfg80211: guard optional PMSR nominal time
wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO
wifi: brcmfmac: drain bus_reset work on device removal
wifi: brcmfmac: make release_scratchbuffers idempotent
...
====================
Link: https://patch.msgid.link/20260722092647.119094-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool.
Fixes: 701a0fd523 ("hip04_eth: fix missing error handle for build_skb failed")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260712142729.2057636-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksmbd_decompress_request() bounds the decompressed size only against
the maximum request size. A compression transform can therefore
produce a buffer smaller than an SMB2 PDU and install it as
conn->request_buf.
The receive path subsequently calls ksmbd_smb_request(), which reads
the protocol ID before the normal SMB2 minimum-size check. If the
decompressed output is too short, that read can access beyond the
request allocation.
Require the decompressed output to contain at least a complete minimum
SMB2 PDU before allocating and installing the replacement request
buffer.
Fixes: a08de24c2b ("ksmbd: negotiate and decode SMB2 compression")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The receive path applies the minimum SMB2 PDU size check only when
ProtocolId is SMB2_PROTO_NUMBER. A packet carrying
SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated
dialect does not provide transform handling.
On an SMB 2.1 connection, a short transform packet therefore reaches
init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header
and reads beyond the request allocation. The copied fields can then be
returned to the unauthenticated client.
Compression transforms are converted to ordinary SMB2 messages before
protocol validation. After that conversion, validate ordinary SMB2
requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption
transform requests to contain both a transform header and an SMB2
header. This rejects truncated requests before work allocation.
Fixes: 368ba06881 ("ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-31063
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-cifs/20260702155449.3639773-1-james_montgomery@disroot.org/
Signed-off-by: James Montgomery <james_montgomery@disroot.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths.
Reported-by: LocalHost <localhost.detect@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c).
Fixes: 299f962c0b ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow")
Assisted-by: atomcode:glm-5.2
Assisted-by: Codex:gpt-5.5
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
set_ntacl_dacl() can stop copying ACEs before consuming the full input
DACL when size accounting overflows.
When that happens, num_aces reflects only the ACEs that were actually
copied into the output DACL, but set_posix_acl_entries_dacl() still
receives nt_num_aces and uses it to walk the existing ACE array during
dedup.
That makes the dedup walk scan past the copied ACE array and inspect
buffer tail that does not contain valid ACEs.
Split the two meanings currently carried by the NT ACE count. Pass the
number of copied NT ACEs to bound the dedup walk, and preserve the
original "input DACL had NT ACEs" state separately for the
Everyone/default ACL fallback.
This keeps the dedup walk aligned with the ACEs that are actually
present in the rebuilt DACL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_FLAGS_SIGNED is controlled by the incoming request and only indicates
that a signature accompanies that request. Do not use it to decide whether a
signing-required session must authenticate the request.
Reject an unsigned plaintext request before dispatch when the session
requires signing. Continue to validate signatures on signed requests,
including when signing is optional. Encrypted requests have already been
authenticated during decryption.
An OPLOCK_BREAK acknowledgment is a session request and is subject to the
same signing rule, so do not exclude it from signed-request detection.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Tested-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions.
Reported-by: Charles Vosburgh <trilobyte777@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Michael Bommarito says:
====================
amt: fix use-after-free of the skb head across pulls
Several AMT receive and transmit paths cache a pointer into the skb head
and then call a helper that can reallocate that head before the cached
pointer is used again, so the later access reads or writes freed memory.
Patch 1 walks every AMT path and, for each pointer used after a
reallocating call, either snapshots the value before the first pull or
re-derives the pointer after the last one.
Patch 2 is a smaller, separable hardening change: the three handlers
that rewrite the ethernet header do so in place without making the head
private, which corrupts a cloned skb (for example one held by a packet
tap). It adds skb_cow_head() before the rewrite, split out so the
use-after-free fix is not held up by discussion of the clone case.
====================
Link: https://patch.msgid.link/20260711151934.2955226-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt_multicast_data_handler(), amt_membership_query_handler() and
amt_update_handler() rewrite the ethernet header of the decapsulated skb
in place (eth->h_proto, eth->h_dest and, for the query, also
eth->h_source) before handing it up the stack. The skb head may be
shared, for example when a packet tap has cloned it on the underlay
interface, so writing through it corrupts the other reader's copy.
Call skb_cow_head() before the rewrite so the head is private. It is
placed before the pointers into the head are (re-)derived, so a
reallocation caused by the copy is picked up by those derivations.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260711151934.2955226-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FS_IOC32_GETVERSION has a distinct compat command encoding. Passing it
through compat_ptr_ioctl() leaves pidfd_ioctl() unable to recognize the
otherwise architecture-independent inode generation query.
Translate the compat command to FS_IOC_GETVERSION before dispatching it
through the native pidfd ioctl implementation.
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/20260716052822.1034228-1-me@linux.beauty
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Commit 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
allowed filesystems that implement the copy_file_range() f_op to decide
if they want to access cross-sb copy from/to the same fs type.
The same commit added checks to verify same sb copy for filesystems that
implement ->copy_file_range() and do not support cross-sb copy at the
time, namely, to ceph, fuse and nfs.
The two remaining fs which implement ->copy_file_range(), cifs and
overlayfs started to support cross-sb copy from this time.
While overlayfs does support cross-sb copy when the two underlying files
are on the same base fs, the copy operation on the two real files from
two different overalyfs filesystems is performed with the mounter
creds of the destination overlayfs and the read permission access hook
for the source file was called with the wrong creds.
This could cause either deny of access to copy which would otherwise be
allowed (e.g. with splice) or allow read access to file which would
otherwise be denied.
Fix the latter case by explicitly verifying read access to source file
with the source overlayfs mounter creds.
The former case remains a quirk of cross-sb overlayfs copy, but
userspace could fall back to regular copy so no harm done.
Fixes: 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260712122421.203113-1-amir73il@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory.
Fixes: d3f5168a08 ("drm/vc4: Bind and initialize the V3D engine.")
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Link: https://patch.msgid.link/20260721-rpi-vc4-fix-v2-1-b813dcd01dc7@linutronix.de
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Currently, DRM_PANEL_SAMSUNG_S6E3HA8 selects DRM_DISPLAY_DSC_HELPER
without ensuring its dependency, DRM_DISPLAY_HELPER, is enabled,
causing an unmet dependency.
Let's select DRM_DISPLAY_HELPER as other similar options do.
This unmet dependency bug was found by kconfirm, a static analysis tool
for Kconfig.
Fixes: fd3b2c5f40 ("drm/panel: s6e3ha8: select CONFIG_DRM_DISPLAY_DSC_HELPER")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260712001514.2318597-1-julianbraha@gmail.com
Currently, DRM_PANEL_ILITEK_ILI9882T selects DRM_DISPLAY_DSC_HELPER
without ensuring DRM_DISPLAY_HELPER is also enabled, causing an unmet
dependency and build failure.
Other similar options select DRM_DISPLAY_HELPER, let's do the same here.
This unmet dependency bug was found by kconfirm, a static analysis tool
for Kconfig.
Fixes: 68e28facbc ("drm/panel: ilitek-ili9882t: Select DRM_DISPLAY_DSC_HELPER")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260712002632.2323484-1-julianbraha@gmail.com
Commit 4c95b2b7d4 ("drm/panel: ilitek-ili9881c: support Waveshare
7.0" DSI panel") adds an additional iovcc regulator that other
Ilitek ili9881c based panels apparently do not have or need.
The commit goes out of its way to make usage of this new regulator
optional, dutifully testing if the field in `struct ili9881c` is NULL
before touching the new regulator. However, in the probe function,
it unconditionally fails if devm_regulator_get_optional returns an
error.
devm_regulator_get_optional() returns -ENODEV if the regulator is
missing, causing probe to fail for other panels that do not have
an iovcc-supply set in the device tree.
Fixes: 4c95b2b7d4 ("drm/panel: ilitek-ili9881c: support Waveshare 7.0" DSI panel")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260713082213.75759-1-david.oberhollenzer@sigma-star.at
Currently, v3d_power_suspend() removes the GPU clock without first
quiescing the GPU's memory interface (AXI). If the clock is cut while the
core still has outstanding AXI transactions in flight, the hardware is
frozen mid-transaction. That corrupted state survives the power cycle, and
the first job submitted after the next resume will cause a GPU hang
accompanied by an L2T "pte invalid" MMU fault.
The hardware already provides a safe-powerdown sequence for this: request
the GMP to stop and wait for outstanding reads/writes to drain
(v3d_idle_axi()), plus the GCA safe shutdown on pre-4.1 HW
(v3d_idle_gca()). The driver implements both, but the runtime PM support
added later never invoked them when powering the GPU down.
Perform the safe-powerdown sequence in v3d_power_suspend() before
disabling the clock, while the core is still powered.
Link: https://github.com/raspberrypi/linux/issues/7443
Link: https://github.com/raspberrypi/linux/issues/7488
Fixes: 458f2a712a ("drm/v3d: Introduce Runtime Power Management")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260718-v3d-pm-axi-transactions-v1-2-4ecd7729ed70@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Both read and write may receive internal restart error codes from
the filesystem layer and should be converted to -EINTR. However,
when multishot read support was added, the error code normalization
was lost for both io_read() and io_read_mshot().
Extract the conversion into io_fixup_restart_res() and apply it
in all three locations: io_rw_done(), io_read(), and io_read_mshot().
Fixes: a08d195b58 ("io_uring/rw: split io_read() into a helper")
Cc: stable@vger.kernel.org
Signed-off-by: Yitang Yang <yi1tang.yang@gmail.com>
Link: https://patch.msgid.link/20260722124551.130563-1-yi1tang.yang@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
v3d_idle_axi() drains the GPU's memory interface for a safe powerdown by
using the V3D_GMP_CFG register. It reached both registers with the macros
V3D_CORE_READ and V3D_CORE_WRITE.
On V3D 7.x the GMP is no longer a per-core block; it lives in the hub
register region. Reaching it through the per-core register block addresses
the wrong region.
Select the hub accessors (V3D_{READ,WRITE}) for the GMP on V3D 7.x and
keep the per-core path for earlier generations.
Cc: stable@vger.kernel.org
Fixes: 0ad5bc1ce4 ("drm/v3d: fix up register addresses for V3D 7.x")
Link: https://patch.msgid.link/20260718-v3d-pm-axi-transactions-v1-1-4ecd7729ed70@igalia.com
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Both pidfs_alloc_file() and pidfs_export_open() need to force O_RDWR
and reapply the pidfd flags that do_dentry_open() strips. Move the
common logic into a helper.
PIDFD_AUTOKILL is now part of the restore mask in the file handle path
as well, but pidfs_export_permission() rejects O_TRUNC, so this is a
no-op there. But warn nonetheless.
Link: https://patch.msgid.link/20260722-esszimmer-umsetzen-nennt-ed5fc604300a@brauner
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
PIDFD_THREAD shares O_EXCL. do_dentry_open() clears O_EXCL after
pidfs_export_open() validates the flags, so open_by_handle_at()
silently turns a thread pidfd into a process pidfd.
Restore PIDFD_THREAD on the opened file, matching pidfs_alloc_file().
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260716052726.1032092-1-me@linux.beauty
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
In the trusted.* xattr namespace, ovl_is_escaped_xattr() compares
one byte less than the escaped overlay xattr prefix length. This makes
it match "trusted.overlay.overlay" without requiring the trailing dot.
As a result, an xattr such as "trusted.overlay.overlayfoo" is
incorrectly treated as an escaped overlay xattr. This can be reproduced
by setting "trusted.overlay.overlayfoo" on a lower file and listing xattrs
through an overlay mount. listxattr() then exposes it as
"trusted.overlay.oo", and a following getxattr() on that listed name fails
with ENODATA.
Compare the full escaped prefix, including the trailing dot, so
similarly-prefixed private xattrs are not misclassified.
Fixes: dad02fad84 ("ovl: Support escaped overlay.* xattrs")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Link: https://patch.msgid.link/20260708082221.633602-1-chenyichong@uniontech.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
huge_ptep_get() can be handed a virtual address pointing to the middle
of a contpmd/contpte mapped hugetlb folio (examples of callers are
pagemap_hugetlb_range, page_mapped_in_vma).
The arm64 helper rewalks the pgtables in find_num_contig to answer
whether the huge pte we have maps a contpmd or a contpte hugetlb folio,
and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over
the contiguous ptes. We can falsely return CONT_PTES instead of
CONT_PMDS if the addr is not aligned. On systems where CONT_PTES !=
CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit
state, meaning extra work for the kernel. Even worse, we may iterate
beyond the PTE table and dereference a garbage ptep pointer to access
physical memory we don't own. Since the ptep pointer is a linear map
address, we may run off the end of the linear map or into a hole,
dereference a VA not mapped into the kernel pgtables and cause kernel
panic.
Fix this by aligning the pmdp pointer down to a contpmd base before
checking equality with the passed huge pte pointer, to correctly answer
whether the huge pte is the base of a contpmd block.
Fixes: 29cb805196 ("arm64: hugetlb: Cleanup huge_pte size discovery mechanisms")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Sunho Park <shpark061104@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Felix Fietkau says:
===================
mt76 fixes for 7.2
- fix warnings on removing device
- null pointer deref fixes
- fix for data structure confusion on USB/SDIO devices
===================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HPAGE_PMD_SHIFT expands to BUILD_BUG() when CONFIG_PGTABLE_HAS_HUGE_LEAVES
is not set, causing a compile error when both CONFIG_TRANSPARENT_HUGEPAGE
and CONFIG_HUGETLB_PAGE are disabled:
drivers/gpu/drm/drm_pagemap.c:480:12: error: call to '__compiletime_assert_458'
declared with 'error' attribute: BUILD_BUG failed
480 | order = HPAGE_PMD_ORDER;
| ^
include/linux/huge_mm.h:117:26: note: expanded from macro 'HPAGE_PMD_ORDER'
117 | #define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
| ^
include/linux/huge_mm.h:113:28: note: expanded from macro 'HPAGE_PMD_SHIFT'
113 | #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
Define DRM_PAGEMAP_PMD_ORDER, which maps to HPAGE_PMD_ORDER when
CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled and to -1 otherwise.
This is safe because all code paths that use DRM_PAGEMAP_PMD_ORDER are
reachable only when CONFIG_ARCH_ENABLE_THP_MIGRATION is enabled.
Fixes: 139ab31aea ("drm/pagemap: Correct cpages calculation for migrate_vma_setup")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202607201914.LpAGsbXs-lkp@intel.com/
Cc: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721223244.1102276-1-matthew.brost@intel.com
DRM pagemap overloads the migration PFN array to store driver-provided
PFNs before calling migrate_vma_*() to finalize the migration. If an
error occurs during the incremental copy phase, the migration PFN
entries are reverted to their original state. After reverting the
device-folio mutations, clear any remaining driver-provided PFNs to
avoid confusing the migrate_vma_*() helpers.
Also clear any driver-provided PFNs if populate_devmem_pfn() fails, as
a precaution against stale entries being interpreted as migration PFNs.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 3902846af3 ("drm/pagemap Fix error paths in drm_pagemap_migrate_to_devmem")
Fixes: ec265e1f1c ("drm/pagemap: Support source migration over interconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260721204353.1082632-1-matthew.brost@intel.com
