During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 1406199418 ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260616161016.19346-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a new build failure with MT7996E=m MT76_CORE=y and NET_AIROHA_NPU=m:
ld.lld: error: undefined symbol: airoha_npu_get
ld.lld: error: undefined symbol: airoha_npu_put
>>> referenced by npu.c
>>> drivers/net/wireless/mediatek/mt76/npu.o:(mt76_npu_init) in archive vmlinux.a
Fix this by reworking the dependency for the MT7996_NPU to only
allow enabling that when mt76_core can link against the npu driver.
To make sure this gets caught more easily in the future when additional
mt76 variants need the same dependency, also turn CONFIG_MT76_NPU into
a tristate symbol that has the same dependency.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260612201519.4054683-1-arnd@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_npu_device_active() and mt76_ppe_device_active() read dev->mmio.npu
and dev->mmio.ppe_dev. The mmio, usb and sdio bus structs share a union in
struct mt76_dev, so on USB and SDIO these read unrelated data from the
usb/sdio struct, which is non-NULL in practice.
mt76_npu_device_active() then returns true on USB, and
mt76_rx_poll_complete() takes the offload path and skips
mt76_rx_aggr_reorder(). RX A-MPDU subframes are delivered out of order and
the peer's TCP stack treats that as loss: heavy retransmissions and reduced
throughput in AP mode. Seen on mt7921u, mt7925u, mt76x2u and mt76x0u.
Gate both helpers on mt76_is_mmio() so they only run for the bus type that
owns the mmio union member.
Fixes: 7fb554b1b6 ("wifi: mt76: Introduce the NPU generic layer")
Cc: stable@vger.kernel.org
Tested-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260720232640.41293-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available.
Fixes: e6d557a78b ("mt76: mt7915: rely on mt76_connac_get_phy utilities")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260620155332.81120-1-ruoyuw560@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad6530 ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260708075539.726200-1-lgs201920130244@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488a ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally.
Fixes: e3fc065682 ("cifs: Deferred close performance improvements")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows Server's directory enumeration metadata lags behind the actual
file size after a write+close or rename. A concurrent readdir() in the
window between close() returning to userspace and stat() being called
overwrites the correct cached i_size with the stale server value, causing
stat() to return the wrong size.
Once _cifsFileInfo_put() removes the last writable handle from
openFileList, is_size_safe_to_change() permits readdir to overwrite
i_size. smb2_close_getattr() then stamps cifs_i->time = jiffies, making
the corrupt cached value appear fresh to the next stat().
The existing check (see Fixes:) only blocked stale size updates while
an active RW lease was held, not after the last writable handle closes.
Add cifsInodeInfo->time_last_write, written via smp_store_release() at
writable close and on setattr/truncate. is_size_safe_to_change() checks
is_inode_writable() first (acquiring open_file_lock), then rejects a
readdir size update if time_last_write falls within acregmax jiffies.
The spinlock release in _cifsFileInfo_put() forms a store-release barrier
that pairs with the spin_lock() (load-acquire) in is_inode_writable(),
ensuring the subsequent smp_load_acquire() on time_last_write observes
any update from a concurrent close(). When a size update is rejected and
the server value differs from the cached one, cifs_i->time is cleared to
force a fresh QUERY_INFO on the next stat().
readdir is also blocked from changing i_size while writable handles are
open or an RW lease is held, even on direct-IO mounts.
For deferred close (closetimeo > 0), time_last_write is refreshed at the
actual server close in smb2_deferred_work_close() and in the
cifs_close_deferred_file*() drain paths invoked by lease/oplock breaks
and tcon teardown, anchoring the protection window to the real close time
rather than the earlier userspace close.
time_last_write == 0 skips the time_before() check to avoid false
positives near boot on 32-bit systems where jiffies starts close to
INITIAL_JIFFIES.
Does not reproduce against Samba or with actimeo=0.
Fixes: e4b61f3b1c ("cifs: prevent updating file size from server if we have a read/write lease")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1c ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To pick up the changes in:
103ff3a50e ("KVM: s390: Add capability to support 2G hugepages")
229132c309 ("LoongArch: KVM: Add DMSINTC device support")
2619da73bb ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
4aebd7d5c7 ("KVM: s390: Add KVM capability for ESA mode guests")
4f256d5770 ("KVM: x86: nSVM: Save/restore gPAT with KVM_{GET,SET}_NESTED_STATE")
822790ab01 ("KVM: x86: Define KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT")
8800dbf661 ("KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled")
bf8f3cec93 ("KVM: s390: vsie: Refactor handle_stfle")
c547c51ff4 ("KVM: arm64: gic-v5: Add ARM_VGIC_V5 device to KVM headers")
d7507a94a0 ("KVM: SVM: Treat exit_code as an unsigned 64-bit value through all of KVM")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
45e57cfb7b ("fs: Clarify FS_CASEFOLD_FL semantics in UAPI header")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
4987a5763f ("net: block MSG_NO_SHARED_FRAGS in sendmsg()")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for further details.
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
a1b6cf8e5e ("drm: uapi: Use SPDX in DRM core uAPI headers")
dc2d30e7db ("drm/doc: document DRM_IOCTL_SYNCOBJ_EVENTFD")
That don't result in changes to the string tables generated from this header.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/drm/drm.h include/uapi/drm/drm.h
Please see tools/include/uapi/README for further details.
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
5ce9cc5a23 ("coco/tdx-host: Don't expose P-SEAMLDR information on CPUs with erratum")
7658b9343a ("KVM: SVM: add GMET bit definitions")
de0bfdc713 ("KVM: x86: Advertise AVX512 Bit Matrix Multiply (BMM) to userspace")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Chao Gao <chao.gao@intel.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
b56ca146a2 ("vmalloc: add __GFP_SKIP_KASAN support")
6a288a4ddb ("mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/gfp_types.h include/linux/gfp_types.h
Please see tools/include/uapi/README for further details.
Cc: David Hildenbrand (Arm) <david@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
b588019e85 ("rtnetlink: add RTEXT_FILTER_NAME_ONLY support")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/rtnetlink.h include/uapi/linux/rtnetlink.h
Please see tools/include/uapi/README for further details.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in:
de9e2b3d88 ("uapi: Provide DIV_ROUND_CLOSEST()")
That just rebuilds perf, silencing this build warning.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/const.h include/uapi/linux/const.h
Please see tools/include/uapi/README for further details.
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 713eeb2279 ("perf build: Move BPF skeleton generation out of
Makefile.perf") the bpf_skel used with 'perf bench uprobe' was moved
from tools/perf/util/bpf_skel/ to tools/perf/bench/bpf_skel.
Copy tools/perf/util/bpf_skel/.gitignore to that new directory so that
files generated during build get ignored by git.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 713eeb2279 ("perf build: Move BPF skeleton generation out of Makefile.perf")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP
responses with TCP-AO options. The option length carries the actual MAC
length, but the TCP header length includes the option rounded up to a
four-byte boundary.
tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not
four-byte aligned, the one to three bytes after the MAC are left
uninitialized and may be transmitted. For the normal TCP-AO hashing
mode, those bytes also have to be initialized before computing the MAC.
Initialize only the alignment padding in the TCP-AO branches, before
hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path.
This avoids adding work to non-AO TCP responses while preserving a valid
authenticated header.
Fixes: decde2586b ("net/tcp: Add TCP-AO sign to twsk")
Fixes: da7dfaa6d6 ("net/tcp: Consistently align TCP-AO option in the header")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260713105631.8616-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to
call_nexthop_res_bucket_notifiers(). When
nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns
-ENOMEM), the error is propagated back before any notifier sets
extack._msg, and the error path formats the stale pointer with
pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE
this dereferences uninitialized stack memory:
Oops: general protection fault, probably for non-canonical address ...
KASAN: maybe wild-memory-access in range [...]
RIP: 0010:string (lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
_printk (kernel/printk/printk.c:2504)
nh_res_bucket_migrate (net/ipv4/nexthop.c:1816)
nh_res_table_upkeep (net/ipv4/nexthop.c:1866)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
Kernel panic - not syncing: Fatal exception
Zero-initialize extack so _msg is NULL on error paths that never set it.
Fixes: 7c37c7e004 ("nexthop: Implement notifiers for resilient nexthop groups")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260713221551.3344650-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9af41cc334 ("gtp: Implement GTP echo response")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Link: https://patch.msgid.link/20260710230724.942574-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
selftests: net: add missing kconfig and settings
When trying to execute the same selftests targets as the ones executed
on NIPA, but using containers with minimal tools, I got some issues
with a few tests.
Most of these issues are due to missing kernel config, but also too
short timeout:
- For the kconfig, these issues were not visible on NIPA, because some
targets are executed in the same runner, using the same kernel: the
config files of the different targets are merged. On my side, I
followed the recommended way, and only used the config file on top of
a 'make defconfig', revealing some missing kconfig's.
- For the timeout, that was not visible on NIPA either because the
Netdev machines are very powerful and the timeout is doubled when
using a debug kernel config (ovpn case), or because there are some
custom values on the test branches only (drv-net).
While at it, add an extra patch to display an error message in case of
failure with some netconsole scripts.
====================
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-0-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In these netconsole tests, bash is used with errexit (set -e). It means
that if the busywait timeout, the tests finish without printing an error
message.
It is fine to ignore these errors, because the following validate_xxx
helpers will check the content of the output file, and exit with an
appropriated error message, e.g. FAIL: File was not generated.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-7-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This psp.py selftest was failing on my side when only using the
drivers/net config file on top of the default one -- the recommended way
to execute selftest targets.
It looks like some kernel config are needed to execute the new tc
commands.
Note that this was not visible on NIPA, because these tests are executed
with the drivers/net/hw ones, combining the two config files, and the hw
one contains the missing ones.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-6-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for the xdp.py test.
Indeed, this test can take up to 3 minutes with some debug kernel config
on NIPA. Set a timeout to 6 minutes, just to be on the safe side.
Note that the Fixes tag here points to the introduction of the xdp.py
test because I don't know when this test started to take more than 45
seconds. That's OK because a timeout of 6 minutes is not exaggerated.
Fixes: 1cbcb1b28b ("selftests: drv-net: Test XDP_PASS/DROP support")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-5-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for a few ovpn tests.
Indeed, these tests can take up to 50 seconds with some debug kernel
config on NIPA. Set a timeout to 90 seconds, just to be on the safe
side.
Note that the Fixes tag here points to the introduction of the ovpn
tests because I don't know when they started to take more than 45
seconds. That's OK because a timeout of 1.5 minutes is not exaggerated.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-4-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
They are required to run the selftests:
- Tests are executed in v4 and v6.
- Virtual Ethernet are used between the different netns.
This has not been seen on NIPA before, because the 'ovpn' tests are
executed with the 'tcp_ao' ones, merging their config files. These two
kernel config are present in tools/testing/selftests/net/tcp_ao/config.
This issue is visible when only the ovpn config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-3-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.
We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.
Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.
The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is required to use unshare(CLONE_NEWUSER).
This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.
This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
machine_constraints_voltage() currently applies apply_uV against the
machine-supplied [min_uV, max_uV] range, and only afterwards clamps
that range down to what the regulator can actually supply (via
ops->list_voltage()).
If the machine-supplied range is wider than the regulator's actual
range, apply_uV's rounding can pick a selector outside the (correct)
clamped range, so the regulator ends up programmed outside its clamped
min/max. At bring-up this shows up as a voltage read-back outside the
clamped range.
Fix this by moving the clamping block ahead of the apply_uV block, so
apply_uV always targets an already-clamped range. Whether apply_uV
should run is decided from the unclamped constraints beforehand and
stored in a local bool, since clamping must not itself change whether
apply_uV fires.
No functional change to the clamping logic itself, only its position
relative to apply_uV. Its early return 0 exits become fallthroughs
since the apply_uV logic now follows it.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-b4-regulator-core-clamp-voltage-v1-1-8e5eec076a8e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c8755b29b5 ("mctp i3c: MCTP I3C driver")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260715072517.13216-1-mhun512@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper.
Fixes: 15649fd541 ("sctp: sysctl: auth_enable: avoid using current->nsproxy")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/390cd5e91ed60eea27b0b64d0468301a9e73b808.1784033357.git.roxy520tt@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing a RESET_IN_REQUEST from a peer,
sctp_process_strreset_inreq() derives the stream count from the
parameter length but does not check whether the resulting
RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN.
The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes
larger than the IN request header (sctp_strreset_inreq, 8 bytes).
Generally, the IP payload is bounded to 65535 bytes, so the stream
list cannot be large enough to trigger the overflow. However, on
interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a
stream list that fits within the incoming IN parameter can cause a
__u16 overflow in sctp_make_strreset_req() when computing the OUT
request size, leading to an undersized skb allocation and a kernel
BUG:
net/core/skbuff.c:207 skb_panic
net/core/skbuff.c:2625 skb_put
net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk
net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req
net/sctp/stream.c:655 sctp_process_strreset_inreq
The local setsockopt path validates the generated reset request size.
However, for an incoming-only reset, it accounts for the smaller IN
request even though the peer must generate an OUT request with the same
stream list. Such a request cannot be completed successfully by the
peer.
Reject peer IN requests whose corresponding OUT request would exceed
SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an
IN request that would require an oversized OUT request from the peer.
Fixes: 7f9d68ac94 ("sctp: implement sender-side procedures for SSN Reset Request Parameter")
Reported-by: AutonomousCodeSecurity@microsoft.com
Closes: https://lore.kernel.org/all/20260707203215.2752-1-blbllhy@gmail.com/
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260710010718.20318-1-blbllhy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC.
If the allocation fails, nsk is NULL.
The connection-refused path is entered when the listen state check
fails, the accept backlog is full, or nsk is NULL. The code
unconditionally calls iucv_sock_kill(nsk) in that path.
iucv_sock_kill() does not accept a NULL socket pointer and immediately
dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL,
calling iucv_sock_kill(nsk) results in a NULL pointer dereference.
Only call iucv_sock_kill() when a child socket was successfully
allocated.
Fixes: 3881ac441f ("af_iucv: add HiperSockets transport")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260709191732.124092-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
