mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: 396939f940 ("mwifiex: add HT operation IE in TDLS setup confirm")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716103042.88469-1-doruk@0sec.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace deprecated one-element arrays with flexible array members.
CONFIG_FORTIFY_SOURCE reports the following warning when
one-element arrays are used as variable-length buffers:
sta_cmd.c:1033 mwifiex_sta_prepare_cmd
memcpy: detected field-spanning write (size 84) of single field
"domain->triplet" at .../marvell/mwifiex/sta_cmd.c:1033 (size 3)
Convert affected structs to use flexible array members.
- Preserve existing wire layouts.
- Use DECLARE_FLEX_ARRAY() for structs inside affected unions.
Tested-on: WRT3200ACM, OpenWrt
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260716001728.57799-1-gvalkov@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
at76_guess_freq() checks only that the received frame is at least a bare
802.11 header (24 bytes) before subtracting the fixed management-body
offset:
len -= el_off;
For both beacon and probe response frames, el_off is 36. If the frame is
shorter than el_off, subtracting it causes the calculated IE length to
wrap. The length is eventually passed to cfg80211_find_elem_match() as a
very large unsigned value, so the element walk runs beyond the RX skb.
This path is reached from at76_rx_tasklet() while scanning. If the device
delivers a truncated beacon or probe response, the oversized IE length
causes an out-of-bounds read during scanning.
Skip the IE lookup if the frame does not reach the variable elements,
before subtracting el_off.
Fixes: 1264b95146 ("at76c50x-usb: add driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260715140815.1242033-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hardware implementations report Scalable-Mode Page-walk Coherency Support
via the SMPWCS field in the extended capability register. If the hardware
does not support page-walk coherency, a clflush is required every time
the page table entries (which are walked by the IOMMU hardware) are
updated.
In the SVA case, page tables are managed by the CPU mm core, not by the
IOMMU driver. Because the IOMMU driver has no way of knowing whether the
CPU page table management code has ensured coherency via clflush, the
driver must deny SVA if the hardware does not support coherent paging.
Fixes: ff3dc6521f ("iommu/vt-d: Fix CPU and IOMMU SVM feature matching checks")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the
(re)association request IEs that the firmware copies into the event:
sinfo->assoc_req_ies = &event->data[len];
len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control;
sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len;
event->len is supplied by the device firmware and is never validated,
and the subtraction is unchecked. assoc_req_ies points into
adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the
kmalloc()'d struct mwifiex_adapter.
On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with
cfg80211_find_ie(), whose for_each_element() loop dereferences each
element header. A firmware-reported event->len larger than the bytes
actually received makes assoc_req_ies_len describe IEs that extend past
event_body, so the walk reads out of the adapter slab object, a
slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie).
An event->len smaller than the header instead makes the int subtraction
negative, which wraps to a huge size_t when stored in assoc_req_ies_len.
The same length is handed to cfg80211_new_sta(), so a more modest
over-claim can also copy stale event_body bytes into the
NL80211_CMD_NEW_STATION notification.
A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver
such an event while the interface is in AP/uAP mode.
Validate event->len before use: reject a length that underflows the
header or that would place the IEs outside the event_body[] buffer the
event was copied into. event->len here is struct mwifiex_assoc_event.len,
a payload field internal to this event, not the transport frame length,
so it is validated in this handler rather than at the generic
MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the
transport frame length. The bound is against event_body[MAX_EVENT_SIZE]
rather than the actually-received length because the transports store the
event differently (USB and SDIO leave the 4-byte event header in
event_skb, PCIe strips it via skb_pull), whereas event_body is the single
fixed buffer all of them copy the event into. This is the event-path
analogue of the receive-path bounds checks added in commit 1195852816
("wifi: mwifiex: Fix OOB and integer underflow when rx packets").
Fixes: e568634ae7 ("mwifiex: add AP event handling framework")
Signed-off-by: HE WEI (ギカク) <skyexpoc@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260715135711.34688-1-skyexpoc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When vhost owns the virtio-net header, i.e. when
VHOST_NET_F_VIRTIO_NET_HDR is negotiated, sock_hlen is 0,
meaning that no header will be forwarded to the TAP device.
In the current vhost_net_build_xdp() implementation,
when sock_hlen == 0, the gso pointer can point at the start of the
Ethernet frame instead of a virtio-net header.
This results in a wrong interpretation of the destination MAC address
bytes as struct virtio_net_hdr fields.
This can, for some MAC addresses, trigger -EINVAL and return early
before the TX descriptor is completed, which can stall vhost-net TX.
Before 97b2409f28, the gso pointer was set to the zeroed padding area,
using it as a synthetic virtio-net header. Restore that behavior.
Fixes: 97b2409f28 ("vhost-net: reduce one userspace copy when building XDP buff")
Signed-off-by: Enrico Zanda <enrico.zanda@arm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260708152242.2268848-1-enrico.zanda@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
wilc_parse_assoc_resp_info() computes the trailing IE length as
ies_len = buffer_len - sizeof(*res);
without first checking that buffer_len is at least sizeof(struct
wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a
received association response (host_int_parse_assoc_resp_info() passes
hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be
validated before the driver accesses the fixed header.
For a frame shorter than the 6-byte fixed header, the subtraction wraps.
For a four-byte response the result is truncated to a u16 ies_len of
65534, so kmemdup() then attempts to copy 65534 bytes starting at
buffer + sizeof(*res), beyond the valid association-response data
(CWE-125). A response shorter than four bytes can also cause an
out-of-bounds read of res->status_code at offsets 2 and 3.
Reject frames too short to hold the fixed header before touching the
header or computing ies_len. Also set the connection status to a failure
on this path: the caller falls through to a
"conn_info->status == WLAN_STATUS_SUCCESS" check after the parser
returns, so leaving the status untouched could let a malformed short
response be treated as a successful association.
Fixes: c5c77ba18e ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Link: https://patch.msgid.link/20260714091811.3596126-1-hhhuang@smu.edu.sg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jeff Johnson says:
==================
ath.git update for v7.2-rc4
The most significant change is to fix an ath12k regression which led
to low MLO RX throughput on WCN7850.
The remainder are an assortment of minor bug fixes spread across many
of the ath drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix regression in rgpower table loading, caused by using
request_firmware(): when the requested firmware does not exist, e.g.
nxp/rgpower_WW.bin does not exist on OpenWRT builds for WRT3200ACM,
request_firmware() falls back to firmware_fallback_sysfs(), which expects
the firmware to be provided by user space using SYSFS. No such utility is
provided in this configuration, so the entire system locks up for 60
seconds, until the request times out. During this time, no other log
messages are observed, and the device does not respond to commands over
UART.
The request_firmware() call is performed in the following context:
current->comm kworker/1:2 in_task 1 irqs_disabled 0 in_atomic 0
Fixed by using request_firmware_direct(). This prevents fallback to SYSFS,
and avoids delay. The rgpower table is optional. The driver falls back
to the device tree power table if the firmware is not present.
The error code is printed for debugging and returned to the caller,
which only cares for success or failure, so there are no side effects.
Fixes: 7b6f16a258 ("wifi: mwifiex: add rgpower table loading support")
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260712221709.7099-1-gvalkov@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver").
Link: https://patch.msgid.link/20260721-gezittert-medium-kreide-b41fc1f0277e@brauner
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
wanxl_pci_init_one() stores the freshly allocated card in driver data
before the PLX BAR is mapped. Several early probe failures then unwind
through wanxl_pci_remove_one(), including failure to allocate the coherent
status area or to restore the DMA mask.
wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and
wanxl_reset() dereferences card->plx. On those early failures card->plx
is still NULL, so the error path can dereference a NULL MMIO pointer.
Only issue the hardware reset once the BAR mapping exists. The remaining
cleanup in wanxl_pci_remove_one() already checks whether later resources
were allocated.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Link: https://patch.msgid.link/20260708143415.3169358-1-ruoyuw560@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nfp_cpp_resource_find() allocates a CPP mutex handle for the matching
resource-table entry and then reports success. nfp_resource_try_acquire()
immediately passes that handle to nfp_cpp_mutex_trylock().
However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens
for a matching table entry, the resource lookup still returns success and
the following trylock dereferences a NULL mutex pointer while opening the
resource.
nfp_resource_acquire() already treats failure to allocate the table mutex
as -ENOMEM. Do the same for the resource mutex and fail the lookup before
publishing the rest of the resource handle.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: f01a216157 ("nfp: add support for resources")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708143408.3168425-1-ruoyuw560@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When ieee80211_vif_update_links() adds new links it allocates a link
container for each and calls ieee80211_link_init() (which registers the
per-link debugfs files with file->private_data pointing into the container)
and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails,
the error path restores the old pointers and jumps to 'free', which frees
the new containers but never removes their debugfs entries or stops the
links. The debugfs files survive with file->private_data dangling at the
freed container, so a later open()+read() (e.g. link-1/txpower)
dereferences freed memory in ieee80211_if_read_link(), a use-after-free.
The removal path already dismantles links correctly via
ieee80211_tear_down_links(), which removes each link's keys and debugfs
entries and calls ieee80211_link_stop(); the add path on the error branch
does not. Commit be1ba9ed22 ("wifi: mac80211: avoid weird state in error
path") hardened this same error path for the link-removal case
(new_links == 0) but left the newly-added links' teardown unaddressed.
drv_change_vif_links() can fail at runtime on MLO drivers (internal
allocation / queue / firmware command failures).
Remove the new links' debugfs entries and stop them before freeing.
BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Read of size 8 at addr ffff888011290000 by task exploit/145
Call Trace:
...
ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
short_proxy_read (fs/debugfs/file.c:373)
vfs_read (fs/read_write.c:572)
ksys_read (fs/read_write.c:716)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a
RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127)
Kernel panic - not syncing: Fatal exception
Fixes: 170cd6a66d ("wifi: mac80211: add netdev per-link debugfs data and driver hook")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260711210302.2098404-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a934
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2.
Link: https://patch.msgid.link/20260721-hochachtung-staumauer-pigmente-15d71f7d7d04@brauner
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
need_sync is a per-IOMMU flag shared by all domains and devices behind
that IOMMU. It is set whenever a command is queued with sync == true and
cleared when a completion-wait (CWAIT) command is queued. However, a
cleared need_sync only means that a covering CWAIT has been queued, not
that all previously queued commands have actually completed in hardware.
iommu_completion_wait() read need_sync locklessly and returned early
when it was false. This breaks the "block until all previously queued
commands have completed" contract in a multi-CPU scenario:
CPU2: queue inv-B => need_sync = true
CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N)
CPU2: read need_sync == false => return 0 (no wait!)
CPU2 returns without waiting for any sequence number even though its
inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not
been signaled). CPU2 then proceeds to, for example, free page-table
pages while the IOMMU can still walk stale translations, opening a
use-after-free window. This is a logical race in the meaning of the
flag, not a memory-visibility issue, so barriers alone do not help.
Fix it without losing the optimization of avoiding redundant CWAIT
commands: take iommu->lock before testing need_sync, and when it is
false do not return early but wait for the last allocated sequence
number (cmd_sem_val). Since need_sync == false implies no sync command
was queued after the last CWAIT, that CWAIT is FIFO-ordered after every
not-yet-completed command, so waiting for its sequence number guarantees
all prior commands (possibly queued by another CPU) have completed. The
common path with pending work is unchanged and no extra hardware command
is issued.
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Fixes: 815b33fdc2 ("x86/amd-iommu: Cleanup completion-wait handling")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Will Deacon <will@kernel.org>
KVM/riscv fixes for 7.2, take #1
- Avoid redundant page-table allocations in ioremap pcache topup
- Apply SBI FWFT LOCK flag only on successful set
- Bound SBI PMU counter mask scan to BITS_PER_LONG
- Skip TLB flush when G-stage PTE becomes valid with Svvptc
- Zicbo[m|z|p] block sizes should be always present in ONE_REG
- Inject instruction access fault on unmapped guest fetch
- Serialize virtual interrupt pending state updates using raw spinlock
- Fix Spectre-v1 in vector register access via ONE_REG
On Intel platforms with a VMX preemption timer and APICv, if a VMM
calls KVM_GET_LAPIC before KVM_GET_MSRS to save the vCPU state, it is
possible to lose a pending timer interrupt.
If the thread running these ioctls is migrated to another core after
calling KVM_GET_LAPIC but before KVM_GET_MSRS and the guest is using
their LAPIC timer in TSC-deadline mode, not only does the save LAPIC
state not carry the pending interrupt, the TSCDEADLINE MSR will be
zeroed.
After migration across CPUs, KVM_GET_MSRS calls vcpu_load, posting the
interrupt and clearing the MSR:
vcpu_load() ->
kvm_arch_vcpu_load() ->
kvm_lapic_restart_hv_timer() ->
start_hv_timer() ->
apic_timer_expired() ->
kvm_apic_inject_pending_timer_irqs()
. post interrupt into the LAPIC state
. clear IA32_TSCDEADLINE
The saved LAPIC state will be missing the pending interrupt and the saved
MSR will be zero. Oops.
Fix by only posting an interrupt when we're attempting to enter the guest
(vcpu->wants_to_run == true), not for vcpu_load from other paths.
Assisted-by: gemini:gemini-3.1-pro-preview
Debugged-by: David Matlack <dmatlack@google.com>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Jim Mattson <jmattson@google.com>
Debugged-by: James Houghton <jthoughton@google.com>
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Message-ID: <20260715234234.15382-2-venkateshs@chromium.org>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Cc: stable@vger.kernel.org
Fixes: ae95f566b3 ("KVM: X86: TSCDEADLINE MSR emulation fastpath", 2020-05-15)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test asserted that the X86_FEATURE_SEV CPUID bit exactly matches
whether KVM offers KVM_X86_SEV_VM. That is not an invariant: when all
SEV ASIDs are assigned to SEV-SNP, KVM does not offer the SEV VM type
even though CPUID reports SEV, so the test aborts on an SNP-only host.
Derive SEV availability from KVM_CAP_VM_TYPES (as already done for SEV-ES
and SNP), assert only the one-way implication that a type offered by KVM
is also reported in CPUID, and TEST_REQUIRE() the SEV VM type so the test
skips cleanly when it is unavailable.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <5d3c345113748f39b7982e365d241abaf3e11086.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sev_smoke_test ran the plain SEV subtest unconditionally, gated only on
the X86_FEATURE_SEV CPUID bit, while gating SEV-ES and SNP on the
KVM_CAP_VM_TYPES bits. CPUID reporting SEV does not mean KVM offers the
SEV VM type: when all SEV ASIDs are assigned to SEV-SNP, KVM_X86_SEV_VM
is unavailable even though X86_FEATURE_SEV is set. On such a host the
test aborts in KVM_CREATE_VM instead of exercising the available modes.
Gate the SEV subtest on KVM_CAP_VM_TYPES like the others, so the test
runs the VM types the host actually offers.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <2b5e7a83d277134294199a455469bb436196b902.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_destroy_caches() destroys pte_list_desc_cache and
mmu_page_header_cache, but leaves both pointers unchanged. The pointers
live in kvm.ko, and therefore survive when a vendor module is unloaded
while kvm.ko remains loaded.
If creation of pte_list_desc_cache fails during a subsequent vendor
module load, its assignment sets pte_list_desc_cache to NULL and the
error path calls mmu_destroy_caches(). mmu_page_header_cache still
points to the cache destroyed during the preceding vendor module
unload. Passing that stale pointer to kmem_cache_destroy() causes a
slab use-after-free.
Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y,
CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A
one-shot test hook forces pte_list_desc_cache to NULL on the second
invocation of kvm_mmu_vendor_module_init():
1. Load kvm.ko and kvm-intel.ko, creating both caches.
2. Unload only kvm_intel, leaving kvm.ko loaded.
3. Reload kvm_intel and force initialization through the -ENOMEM path.
KASAN reports:
BUG: KASAN: slab-use-after-free in
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
kmem_cache_destroy+0x21/0x1d0
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
Allocated by task 16817:
__kmem_cache_create_args+0x12c/0x3b0
__kmem_cache_create.constprop.0+0xb6/0xf0 [kvm]
kvm_mmu_vendor_module_init+0x13b/0x170 [kvm]
...
Freed by task 16820:
kmem_cache_destroy+0x117/0x1d0
kvm_mmu_vendor_module_exit+0x21/0x30 [kvm]
Clear both pointers immediately after destroying their caches so that
the stored state reflects the caches' lifetime and repeated cleanup is
safe.
With the fix applied, the same injected vendor module reload fails with
-ENOMEM as expected and produces no KASAN report.
Fixes: cb498ea2ce ("KVM: Portability: Combine kvm_init and kvm_init_x86")
Cc: stable@vger.kernel.org
Signed-off-by: Phil Rosenthal <phil@phil.gs>
Message-ID: <20260718-kvm-mmu-cache-uaf-v3-1-e103b93c74e1@phil.gs>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu_zap_oldest_mmu_pages() excludes a shadow page whose root_count
is non-zero from top-level reclaim, because such a page cannot be
freed. The path in mmu_page_zap_pte() that recursively zaps a parentless
nested TDP child has no such check. As a result, a shadow page can
be zapped even if the page itself can't be freed; as the comment in
kvm_mmu_zap_oldest_mmu_pages() notes, zapping it will just force vCPUs
to rebuild the page.
As in top-level reclaim, do not recursively prepare zapping of a
nested TDP child whose root_count is non-zero.
Fixes: 2de4085ccc ("KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.
Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acb, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.
Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Fixes: f95eec9bed ("KVM: x86/mmu: Don't put invalid SPs back on the list of active pages")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
free_nested() frees the shadow VMCS while vmcs01 still points to it. But
because it is asynchronous with respect to loaded_vmcs_clear(), the vCPU
might migrate before the pointer is cleared and __loaded_vmcs_clear()
may then execute VMCLEAR.
The VMCS needs to stay attached until its explicit VMCLEAR completes, but
then it can be hidden and the page safely freed.
Fixes: 355f4fb140 ("kvm: nVMX: VMCLEAR an active shadow VMCS after last use")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE,
but some callers expect the NPU to write response data back into the
same buffer:
- airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into
the buffer, then the caller reads it via memcpy()
- airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back
npu_stats_addr field in the response
On non-cache-coherent architectures like EN7581 (Cortex-A53 without
hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op
— it does not invalidate the CPU cache. If the NPU-written cache line
is still present in the CPU cache when the caller reads the buffer,
the CPU observes stale data instead of the NPU response.
This is a timing-sensitive bug: small mailbox buffers (~24 bytes)
typically fit in a single cache line and may survive in the cache
until the caller reads them, producing silent data corruption rather
than a crash. The bug is more likely to trigger when the caller reads
the response immediately after dma_unmap_single() without intervening
cache-evicting operations.
Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures
dma_unmap_single() invalidates the CPU cache on non-coherent systems.
The mailbox buffers are small so there is no performance concern.
Fixes: c52918744e ("net: airoha: npu: Move memory allocation in airoha_npu_send_msg() caller")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178351055214.98729.11403147818632027428@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object.
Fixes: 7194792308 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260708111738.750391-1-lgs201920130244@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
airoha_ppe_deinit() replaces the NPU pointer with NULL via
rcu_replace_pointer() but does not wait for existing RCU readers
to exit before calling ppe_deinit() and airoha_npu_put(). This can
cause a use-after-free if a reader in an RCU read-side critical
section still holds a reference to the NPU when it is freed.
The init path (airoha_ppe_init) already calls synchronize_rcu()
after rcu_assign_pointer(), but the deinit path introduced in
commit 6abcf751bc ("net: airoha: Fix schedule while atomic in
airoha_ppe_deinit()") omitted the matching barrier when switching
from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer().
Add synchronize_rcu() before ppe_deinit() to ensure all existing
RCU readers have completed before the NPU resources are released.
Fixes: 6abcf751bc ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178351022574.97989.6880403520276841703@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object.
Fixes: 84cba72956 ("dpaa2-switch: integrate the MAC endpoint support")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708111025.749311-1-lgs201920130244@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefano Garzarella says:
====================
vsock/virtio: collapse receive queue under memory pressure
This series contains a patch (the first one) that is part of work I'm
doing to improve the tracking of memory used by AF_VSOCK sockets.
The second patch is a test for our suite that highlights the issue.
Since Brien reported an issue with his environment (based on Linux 6.12.y)
related to the work I’m doing, I extracted this patch and tried to make it
as easy as possible to backport. Brien tested it by backporting it to
6.12.y, which now contains the backport of the 059b7dbd20
("vsock/virtio: fix potential unbounded skb queue").
This patch primarily fixes STREAM sockets, but also partially fixes
SEQPACKET (with the exception of EOMs, which are kept in separate skbs to
avoid overcomplicating the code).
The rest of the work, I feel, is more net-next material and still needs
some work to be completed.
v1: https://lore.kernel.org/netdev/20260626134823.206676-1-sgarzare@redhat.com/
====================
Link: https://patch.msgid.link/20260708102904.50732-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that sends 2 MB of data using randomly sized small packets
(129-512 bytes) over a SOCK_STREAM connection. Packets above
GOOD_COPY_LEN (128) bypass the in-place coalescing in recv_enqueue(),
forcing each one into its own skb.
Without receive queue collapsing, the per-skb overhead eventually
exceeds buf_alloc and the connection is reset. The test verifies
that all data arrives and that content integrity is preserved.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260708102904.50732-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When many small packets accumulate in the receive queue, the skb overhead
can exceed buf_alloc even while the payload is within bounds. This causes
virtio_transport_inc_rx_pkt() to reject packets, leading to connection
resets during large transfers under backpressure.
The issue was reported by Brien, who has a reproducer, but it is also
easily reproducible with iperf-vsock [1] using a small packet size:
iperf3 --vsock -c $CID -l 129
which fails immediately without this patch but with commit 059b7dbd20
("vsock/virtio: fix potential unbounded skb queue").
Inspired by TCP's tcp_collapse() which solves a similar problem, add
virtio_transport_collapse_rx_queue() that walks the receive queue and
re-copies data into compact linear skbs to reduce the overhead.
The collapse is triggered proactively from when the number of skb queued
is close to exceeding the overhead budget.
A pre-scan counts the eligible bytes to size each allocation precisely,
avoiding waste for isolated small packets. Partially consumed skbs are
kept as-is to preserve buf_used/fwd_cnt accounting, EOM-marked skbs to
maintain SEQPACKET message boundaries, and skbs already larger than the
collapse target because they already have a good data-to-overhead ratio.
Walking a large queue may take a significant amount of time and cache
misses, causing traffic burstiness. To limit this, the collapse stops
once enough room is freed for this packet and the next one, but may
opportunistically free more to fill each collapsed skb to capacity.
[1] https://github.com/stefano-garzarella/iperf-vsock
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Reported-by: Brien Oberstein <brienpub@gmail.com>
Closes: https://lore.kernel.org/netdev/618701dd023e$063de350$12b9a9f0$@gmail.com/
Tested-by: Brien Oberstein <brienpub@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260708102904.50732-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but
then reloads the pointer for wake_up_process().
local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so
the second load can see NULL even if the first load did not.
Take a READ_ONCE() snapshot and use it for both the NULL check and the
wake_up_process() call, as rxrpc_encap_rcv() already does.
Fixes: 5800b1cf3f ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708093534.53486-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GTPv1-U packets may carry a chain of extension headers before the inner
IP packet. The receive path already parses and skips these extension
headers, but it currently reads the inner protocol before doing so.
As a result, the first extension header byte is interpreted as the inner
IP version. Packets with extension headers are then dropped before PDP
lookup.
Parse the extension header chain before calling gtp_inner_proto(), so the
inner protocol is read from the actual inner IP header.
Fixes: c75fc0b9e5 ("gtp: identify tunnel via GTP device + GTP version + TEID + family")
Signed-off-by: Zhixing Chen <running910@gmail.com>
Link: https://patch.msgid.link/20260708042244.120898-1-running910@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison.
Fixes: c809195f55 ("rds: clean up loopback rds_connections on netns deletion")
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Tested-by: Allison Henderson <achender@kernel.org>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260708024314.601139-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery.
Fixes: bf11485f84 ("net/mlx5: Register mlx5e priv to devcom in MPV mode")
Assisted-by: Codex:gpt-5
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707233911.3651139-1-manjunath.b.patil@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb
length in OVS_CB(skb)->cutlen. When a later userspace action segments a
GSO skb, queue_gso_packets() reuses that delta for each smaller segment.
A segment can then reach queue_userspace_packet() with cutlen greater
than skb->len, underflowing the length passed to skb_zerocopy().
Store the maximum preserved length instead and bound each consumer
against the current skb length. Use U32_MAX as the no-truncation
sentinel so the value remains valid if skb geometry changes before a
consumer handles it.
Fixes: f2a4d086ed ("openvswitch: Add packet truncation support.")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.5
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260707221635.27489-1-kylebot@openai.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
REG_FE_GDM_MIB_CLEAR after every read creates a race window where
packets arriving between read and clear are lost from statistics.
Switch to a delta-based approach instead:
- 64-bit H+L registers (ok pkts/bytes, E64..L1023): read absolute
hardware total directly into a local variable; clamp with max(new, old)
to prevent torn-read regression when the counter carries between the
two reads.
- 32-bit registers (drops, bc, mc, errors, runt, long): accumulate
(u32)(curr - prev) into a 64-bit software counter; unsigned
subtraction handles wrap-around transparently.
- tx/rx_len[0] ([0,64] bucket): combines RUNT_CNT (32-bit, delta via
tx_runt/rx_runt) and E64_CNT (64-bit, absolute) into a single local
accumulator; max(new, old) applied here too to guard against a torn
read of E64 when the RUNT accumulator is unchanged between polls.
MIB counters are zeroed by the SCU FE reset (EN7581_FE_RST) asserted
in airoha_hw_init() at module load, so no explicit MIB clear is needed
in airoha_fe_init().
Merge airoha_dev_get_hw_stats() into airoha_update_hw_stats() and
move stats_lock inside. Plain spin_lock() is correct: the function
is only called from ndo_get_stats64() in process context. Each dev
refreshes only its own MIB counters; sibling devs on a shared GDM3/4
port are polled when their own netdev is queried.
Fixes: 8f4695fb67 ("net: airoha: better handle MIBs for GDM ports with multiple devs attached")
Signed-off-by: Aniket Negi <aniket.negi03@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260707152639.105628-1-aniket.negi03@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drm_gpusvm_scan_mm() asks HMM to report the current CPU page-table
state without faulting missing entries by leaving default_flags set to
zero. The HMM PFN array is still caller-owned input/output state, and
the framework may preserve input bits while filling entries. It is not
safe for the caller to hand HMM an uninitialized array and then treat
entries without HMM_PFN_VALID as an authoritative unpopulated result.
Use kvcalloc() for the temporary PFN array so entries that are not
reported as valid start from the documented zero state. This prevents
random stack or heap contents from being interpreted as HMM PFN flags or
PFN values during the scan.
Fixes: f1d08a5864 ("drm/gpusvm: Introduce a function to scan the current migration state")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/178406967042.1113483.2116704310277917086.stgit@skinsburskii
af_iucv queues not-yet-received message notifications on iucv->message_q,
each holding a raw pointer to the connection's iucv_path. When the peer
severs the connection, iucv_sever_path() frees that path with
iucv_path_free() but leaves the notifications queued. A later recvmsg()
drains message_q via iucv_process_message_q() and hands the stale path to
message_receive() -- a use-after-free of the freed iucv_path.
Drop the queued notifications when the path is severed; once the path is
gone they can no longer be received. This also frees the notifications
leaked when a socket is closed with messages still queued.
Fixes: f0703c80e5 ("[AF_IUCV]: postpone receival of iucv-packets")
Closes: https://sashiko.dev/#/patchset/20260705-b4-disp-fc79c0dc-v1-1-d2cdcb57afa9@proton.me?part=1
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260707-b4-disp-783fedbb-v1-1-463b9dbda2ea@proton.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
converted the bio-list membership checks from sector pointers to
physical addresses. The two conversions in rmw_assemble_write_bios()
kept their polarity (skip the sector when it is NOT in the bio list,
i.e. when there is nothing to write), but scrub_assemble_read_bios()
has the opposite polarity -- skip the sector when it IS in the bio
list, because then there is nothing to read -- and the conversion
flipped it:
- sector = sector_in_rbio(rbio, stripe, sectornr, 1);
- if (sector)
+ paddr = sector_paddr_in_rbio(rbio, stripe, sectornr, 1);
+ if (paddr == INVALID_PADDR)
continue;
Since a parity-scrub rbio's bio list only holds the empty completion
bio, the result is that scrub_assemble_read_bios() submits no reads at
all. finish_parity_scrub() then compares the parity it computes from
the (cached, correct) data stripes against whatever happens to be in
the freshly allocated, uninitialized stripe pages:
- if the garbage differs from the computed parity, the sector is
"repaired" and written back -- accidentally producing the correct
on-disk result;
- if a recycled page happens to still hold the old (correct) parity
content, the sector is deemed clean, dropped from dbitmap, and the
actually-corrupt on-disk parity is left in place. (Scrub reports
no errors either way: there is no counter for P/Q corruption by
design, so the bug here is purely the failure to read and repair.)
The second case is intermittent because it depends on page-allocator
recycling. Observed with fstests btrfs/297 (raid5, 2 devices): the
corrupted P stripe intermittently stays corrupt after a scrub --
roughly 1/10 runs on x86-64 KVM and up to 7/8 on a UML build whose
timing favors page reuse.
Since the bio-list check can never be true for a parity-scrub rbio --
raid56_parity_alloc_scrub_rbio() adds a single empty completion bio
(asserting bi_size == 0), bio_paddrs[] is only populated by
index_rbio_pages() which is never called for BTRFS_RBIO_PARITY_SCRUB,
and rbio_can_merge() refuses to merge rbios of different operations --
remove the dead check entirely and assert the invariant instead, as
suggested by Qu Wenruo.
After this fix the injected corruption is read, detected and repaired
in every run (8/8 UML, 10/10 KVM), and the new assertion never fires
across the full fstests raid group.
Fixes: 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
CC: stable@vger.kernel.org # 7.1+
Suggested-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Assisted-by: Claude:claude-fable-5
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mykola Lysenko <nickolay.lysenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A fully truncated ordered extent (truncated_len == 0) wrote no data, so its
->csum_list is empty and btrfs_finish_ordered_zoned() trips:
assertion failed: !list_empty(&ordered->csum_list), in fs/btrfs/zoned.c:2141
Since commit 66ff4d366e a short or cancelled direct IO write finishes the
unsubmitted ordered extent as truncated with uptodate = true instead of
setting BTRFS_ORDERED_IOERR, so it now reaches btrfs_finish_ordered_zoned()
rather than being skipped by the IOERR check in btrfs_finish_ordered_io().
generic/208 hits this on a zoned filesystem.
Return early for these, like the BTRFS_ORDERED_PREALLOC case; there is no
zone append result to record and btrfs_finish_one_ordered() skips them too.
Fixes: 66ff4d366e ("btrfs: fix false IO failure after falling back to buffered write")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[COMPILER WARNING]
With GCC 11.5.0 and KASAN enabled on ARM, the following warning is
triggered during compiling:
In file included from ./include/asm-generic/rwonce.h:26,
from ./arch/arm64/include/asm/rwonce.h:81,
from ./include/linux/compiler.h:369,
from ./include/linux/array_size.h:5,
from ./include/linux/kernel.h:16,
from fs/btrfs/ioctl.c:6:
In function ‘instrument_copy_from_user_before’,
inlined from ‘_inline_copy_from_user’ at ./include/linux/uaccess.h:184:2,
inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:222:9,
inlined from ‘btrfs_ioctl_get_csums.isra’ at fs/btrfs/ioctl.c:5220:6:
./include/linux/kasan-checks.h:38:27: warning: ‘args’ may be used uninitialized [-Wmaybe-uninitialized]
38 | #define kasan_check_write __kasan_check_write
./include/linux/instrumented.h:146:9: note: in expansion of macro ‘kasan_check_write’
146 | kasan_check_write(to, n);
| ^~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c: In function ‘btrfs_ioctl_get_csums.isra’:
./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here
20 | bool __kasan_check_write(const volatile void *p, unsigned int size);
| ^~~~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c:5201:43: note: ‘args’ declared here
5201 | struct btrfs_ioctl_get_csums_args args;
| ^~~~
[POSSIBLE FALSE ALERTS]
This seems to be a false alert from certain GCC versions.
The @args is immediately over-written by copy_from_user(), and there is
no code touching that @args until copy_from_user() finished correctly.
[WORKAROUND]
Initialize 'args' to zero, which suppresses the warning.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
reserve_chunk_space() stores the return value of
btrfs_zoned_activate_one_bg() in ret. The helper can return 1 after
successfully activating a block group, but ret is later used to decide
whether to reserve metadata for chunk tree updates.
As a result, successful activation skips btrfs_block_rsv_add() and leaves
trans->chunk_bytes_reserved unchanged. Use a separate variable for the
activation result so positive success does not affect the later
reservation. Keep activation failures in ret instead of returning early so
the function uses the common tail path.
Fixes: b6a98021e4 ("btrfs: zoned: activate necessary block group")
CC: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all()
helper") uses the new helper to replace the nested loop inside
verify_bio_data_sectors(), which simplifies the code.
However that also changed the behavior of "continue" when a block has no
data checksum.
Previously the "continue" would skip the old for() loop, which would also
increase @total_sector_nr.
Now the "continue" will skip the new btrfs_bio_for_each_block_all()
loop, which doesn't update @total_sector_nr.
This means if we hit a block that has no data checksum, we will skip all
the remaining blocks no matter if they have data checksum.
As @total_sector_nr will never be updated, and that test_bit() will
always return false.
Fix it by increasing @total_sector_nr before calling "continue".
Fixes: 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all() helper")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When rescue=ibadroots ignores a failure to load the raid stripe tree root,
fs_info->stripe_root remains NULL. After the rescue mount proceeds, reading
file data that requires the raid stripe tree reaches
btrfs_get_raid_extent_offset().
Currently btrfs_search_slot() handles the NULL root and returns -EINVAL.
This avoids a NULL pointer dereference, but provides no diagnostic and
incorrectly describes missing filesystem metadata as an invalid argument.
Check stripe_root before allocating a path, emit a rate-limited error with
the logical address, and return -EUCLEAN.
Lookups with a valid stripe root are unchanged.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dongjiang Zhu <zhudongjiang@fnnas.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
