imsic_early_acpi_init() allocates a firmware node before setting up the
IMSIC state. If imsic_setup_state() fails, the function returns without
freeing the allocated fwnode.
Free the fwnode and clear the global pointer on this error path, matching
the cleanup already done when imsic_early_probe() fails.
[ tglx: Use a common cleanup path instead of copying code around ]
Fixes: fbe826b1c1 ("irqchip/riscv-imsic: Add ACPI support")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260623073744.2009137-1-haoxiang_li2024@163.com
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed.
Link: https://lore.kernel.org/all/20260619184425.3824774-1-rhkrqnwk98@gmail.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
For a char * element in an event, the FILTER_PTR_STRING filter type is
used. When the event occurs, a pointer is stored in the ringbuffer.
If an eprobe references such a char * element of a "base event", the
stored pointer is truncated when it's read from the ringbuffer.
$ cd /sys/kernel/tracing
$ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events
$ echo 1 > tracing_on
$ echo 1 > events/eprobes/enable
$ sleep 1
$ echo 0 > events/eprobes/enable
$ cat trace
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault)
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault)
The problem is in get_event_field
val = (unsigned long)(*(char *)addr);
addr points to the position in the ringbuffer where the pointer was
stored. The assignment reads only the lowest byte of the pointer.
Fix the cast to read the whole pointer. The output of the test above
is now
<idle>-0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick"
<idle>-0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick"
Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/
Fixes: f04dec9346 ("tracing/eprobes: Fix reading of string fields")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.
Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.
However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.
Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.
Fixes: 76b446f5b8 ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Function 'mediatek_gpio_bank_probe()' registers three GPIO chips using
'devm_gpiochip_add_data()'. At this point, the chips become live and visible
to consumers. However, the IRQ domain isn't allocated and set up until
'mt7621_gpio_irq_setup()' is called after the GPIO chips setup finishes.
If a consumer requests a GPIO IRQ concurrently 'mt7621_gpio_to_irq()' can
be called and pass a NULL irq domain pointer irq_create_mapping(), that can
corrupt the mappings or cause a crash. Fix this possible problem seting up
irq domain before GPIO chips setup is performed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-4-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The driver uses devm_gpiochip_add_data() to register the GPIO chips which
means the devres subsystem will unregister them only after the function
'mt7621_gpio_remove()' returns. During the window between domain destruction
and devres unregistering the GPIO chips, the chips are still fully active.
If a consumer or userspace invokes gpiod_to_irq() during this window,
'mt7621_gpio_to_irq()' can dereference the already-freed irq domain pointer.
Thus, manage the IRQ domain teardown using 'devm_add_action_or_reset()' to
guarantee it is destroyed strictly after the GPIO chips are removed.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-3-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 4ba9c3afda ("gpio: mt7621: Add a driver for MT7621")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-2-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
komeda_dev_resume() calls clk_prepare_enable() without checking the
return value. If the clock fails to enable, the function returns 0
(success) while IRQs are enabled and IOMMU is connected on potentially
unclocked hardware, causing undefined behavior on resume.
Propagate the error from clk_prepare_enable() and fix all call sites
in komeda_drv.c that previously ignored the return value of
komeda_dev_resume():
- komeda_platform_probe(): if resume fails, jump to err_destroy_mdev
(skipping the suspend call, since the clock was never enabled)
- komeda_pm_resume(): propagate the error and skip
drm_mode_config_helper_resume() on failure
This issue was found by code review without access to Komeda hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130828.1066038-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
malidp_runtime_pm_resume() calls clk_prepare_enable() three times
without checking the return value. If any clock fails to enable, the
driver silently proceeds with unclocked hardware, leading to undefined
behavior.
Convert both the resume and suspend paths to use the clk_bulk API:
clk_bulk_prepare_enable() in resume checks the return value and rolls
back any successfully enabled clocks on failure;
clk_bulk_disable_unprepare() in suspend keeps the two paths symmetric.
This issue was found by code review without access to Mali DP hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130812.1065699-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode().
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/C4D296F0E9F3D66C+9397ffbc-eb55-44bb-9b3f-5da4809e7955@smail.nju.edu.cn/
Fixes: af0db57d42 ("ntfs: update inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_attr_fallocate() allocates holes and delayed allocations inside
initialized size by looking up the current runlist element under
ni->runlist.lock. The returned struct runlist_element is only a borrowed
pointer into ni->runlist.rl. A writer can replace and free that array
after the read lock is dropped, so later reads of rl->lcn, rl->length and
rl->vcn can touch freed memory.
The buggy scenario involves two paths, with each column showing the order
within that path:
ntfs_attr_fallocate():
1. Take ni->runlist.lock for read.
2. Get rl from ntfs_attr_find_vcn_nolock().
3. Drop ni->runlist.lock.
4. Read rl->lcn, rl->length and rl->vcn.
mmap page_mkwrite:
1. Enter ntfs_filemap_page_mkwrite().
2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster().
3. Merge allocation state with ntfs_runlists_merge().
4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_attr_fallocate+0xbb8/0xd00
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_attr_fallocate+0xbb8/0xd00
kasan_report+0xe0/0x110
? ntfs_attr_fallocate+0xbb8/0xd00
ntfs_attr_fallocate+0xbb8/0xd00
? lock_acquire+0x2b8/0x2f0
? __pfx_ntfs_attr_fallocate+0x10/0x10
? 0xffffffffc0000095
? down_write+0x10d/0x1e0
ntfs_fallocate+0x5c9/0x1d00
? __pfx_ntfs_fallocate+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? selinux_file_permission+0x3a7/0x510
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
? do_syscall_64+0x81/0x6a0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 410:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3f/0x110
ntfs_runlists_merge+0xaa3/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
ntfs_attr_fallocate+0x53f/0xd00
ntfs_fallocate+0x5c9/0x1d00
vfs_fallocate+0x29d/0xd30
__x64_sys_fallocate+0xc7/0x150
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 424:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x307/0x580
ntfs_rl_realloc+0x6f/0x110
ntfs_runlists_merge+0x7b1/0x3010
ntfs_attr_map_cluster+0x4e5/0xf80
__ntfs_write_iomap_begin+0x8cd/0x2280
iomap_iter+0x6de/0x11e0
iomap_page_mkwrite+0x391/0x650
ntfs_filemap_page_mkwrite+0x1ac/0x400
do_page_mkwrite+0x15c/0x280
__handle_mm_fault+0xd6d/0x1ca0
handle_mm_fault+0x19c/0x470
do_user_addr_fault+0x23b/0x9c0
exc_page_fault+0x5c/0xc0
asm_exc_page_fault+0x26/0x30
Fix this by copying the needed runlist fields while the read lock is still
held and using only those scalar snapshots after unlocking.
After the snapshot, ntfs_attr_map_cluster() can also find that the range
is already mapped and return balloc=false. Only call ntfs_dio_zero_range()
when new clusters were allocated, matching the write iomap path and
preserving the zero-newly-allocated-holes behavior.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop.
Fixes: 7c65ae81ea ("sched_ext: Don't call put_prev_task_scx() before picking the next task")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The shared GPIO descriptor used either a mutex or a spinlock, chosen at
runtime from the underlying chip's can_sleep:
shared_desc->can_sleep = gpiod_cansleep(shared_desc->desc);
... if (can_sleep) mutex_lock(); else spin_lock_irqsave();
can_sleep describes only the value path (->get/->set). Under the same
lock, however, the proxy may call gpiod_set_config() and
gpiod_direction_*(), which can reach pinctrl paths that take a mutex
(e.g. gpiod_set_config() -> gpiochip_generic_config() ->
pinctrl_gpio_set_config()), independent of can_sleep. On a controller
with non-sleeping MMIO value ops the descriptor lock was a spinlock, so
the sleeping pinctrl call ran from atomic context. Reproduced on an
Amlogic A113X board with the workaround from commit 28f2406838
("pinctrl: meson: mark the GPIO controller as sleeping") reverted; the
original Khadas VIM3 report hit the same path:
BUG: sleeping function called from invalid context
__mutex_lock
pinctrl_get_device_gpio_range
pinctrl_gpio_set_config
gpiochip_generic_config
gpiod_set_config
gpio_shared_proxy_set_config <- voting spinlock held
...
mmc_pwrseq_simple_probe
The spinlock existed to take the value vote from atomic context, but the
vote and the (possibly sleeping) control operations share the same state
and lock, so this scheme cannot serialize config under a mutex and still
offer atomic value access. Always serialize the shared descriptor with a
mutex instead and mark the proxy a sleeping gpiochip, driving the
underlying GPIO through the cansleep value accessors: those are valid
for both sleeping and non-sleeping chips, so value access keeps working
on fast controllers, at the cost of no longer being atomic.
With every vote edge now driven through the cansleep value setter,
gpio_shared_proxy_set_unlocked() no longer needs a per-call setter: drop
its set_func callback and call gpiod_set_value_cansleep() directly. The
shared direction_output path reaches it only once the line is already an
output, so driving the value there is equivalent to re-issuing
gpiod_direction_output(), without the redundant per-edge re-assertion of
drive config and bias.
This is observable: consumers gating on gpiod_cansleep() take their
sleeping branch on a proxied GPIO (mmc-pwrseq-emmc skips its
emergency-restart reset handler; its normal reset is unaffected), and
consumers that reject sleeping GPIOs (pwm-gpio, ps2-gpio, ...) would
fail to probe. Such atomic users do not share a pin through the proxy,
whose purpose is voting on shared reset/enable lines. The same narrowing
already applies on Amlogic since that workaround, and rockchip
addressed the identical splat per-driver in commit 7ca497be00 ("gpio:
rockchip: Stop calling pinctrl for set_direction"); fixing the proxy
addresses the locking error once, for every controller.
The lock type was added by commit a060b8c511 ("gpiolib: implement
low-level, shared GPIO support"); the sleeping call under it arrived with
the proxy driver.
Fixes: e992d54c6f ("gpio: shared-proxy: implement the shared GPIO proxy driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/
Signed-off-by: Viacheslav Bocharov <v@baodeep.com>
Link: https://patch.msgid.link/20260630101545.800625-2-v@baodeep.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path.
Fixes: f531d13bdf ("xfrm: support sending NAT keepalives in ESP in UDP states")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Qianyu Luo <qianyuluo3@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The three STP timers are not supposed to be armed while the bridge is
administratively down. They are synchronously deactivated when the
bridge is put administratively down and the various call sites check for
'IFF_UP' before arming them.
This check is missing from br_topology_change_detection() and it is
possible to engineer a situation in which the topology change timer is
armed while the bridge is administratively down, resulting in a
use-after-free [1] when the bridge is deleted.
Fix by adding the missing check and for good measures synchronously
shutdown the three timers when the bridge is deleted.
[1]
ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Reported-by: Neil Young <contact@ssd-disclosure.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260629072117.497959-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected.
Fixes: b4b01b4995 ("drm/virtio: add edid support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260620-b4-disp-22bba7bf-v1-1-b95924cee742@proton.me
The teql master->slaves singly linked list is not protected against
multiple writes. It can be mod'ed concurently from teql_master_xmit(),
teql_dequeue(), teql_init() and teql_destroy() without holding any list
lock or RCU protection.
zdi-disclosures@trendmicro.com has demonstrated that the qdisc is freed
after an RCU grace period, but teql_master_xmit() running on another
CPU can still hold a stale pointer into the list, resulting in a
slab-use-after-free:
BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0
Read of size 8 at addr ffff888013fb0440 by task poc/332
Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512)
The fix?
Add a per-master slaves_lock spinlock that serializes all mutations of
master->slaves and the NEXT_SLAVE() links in teql_destroy() and
teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock
around those updates.
Annotate master->slaves and the per-slave ->next pointer with __rcu and
use the appropriate RCU accessors everywhere they are touched:
rcu_assign_pointer() on the writer side (under slaves_lock),
rcu_dereference_protected() for the writer-side loads (also under
slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and
rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(),
which run under RTNL.
Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list
traversal in teql_master_xmit(), so that readers either observe a fully
linked list or are deferred until the in-flight mutation completes. The two
early-return paths in teql_master_xmit() are updated to release the RCU-bh
read-side critical section before returning, since leaving it held would
disable BH on that CPU for good.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260628111229.669751-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
irq_of_parse_and_map() creates irqdomain mappings that should be
balanced with irq_dispose_mapping(). The driver never called
irq_dispose_mapping(), leaking mappings on probe failure and
device removal.
Fix by adding irq_dispose_mapping() in free_gfar_dev() and
expanding its loop from priv->num_grps to MAXGROUPS so the
error path also catches partially-initialized groups. All
irqinfo pointers are pre-initialized to NULL in gfar_of_init(),
making the NULL-guarded walk in free_gfar_dev() safe for every
scenario.
gfar_parse_group() itself is left as a simple parse function
with no resource management; cleanup is centralized in the
caller's error path.
Assisted-by: opencode:big-pickle
Fixes: b31a1d8b41 ("gianfar: Convert gianfar to an of_platform_driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260626225228.427392-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
lan743x_hardware_init() calls pci11x1x_strap_get_status() during the
PCI11x1x probe sequence. That helper acquires the Ethernet subsystem
hardware lock via lan743x_hs_syslock_acquire(), which relies on
adapter->eth_syslock_spinlock to serialize access.
The spinlock is currently initialized only after the strap status is
read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized
spinlock can trip the spinlock debug check.
Fix by initializing adapter->eth_syslock_spinlock before reading the
strap status so the probe path never attempts to lock an uninitialized
spinlock.
Fixes: 46b777ad9a ("net: lan743x: Add support to SGMII 1G and 2.5G")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Thangaraj Samynathan<Thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260626163218.3591486-1-arighi@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In wx_set_vmdq_queues(), the VMDQ mask was not set for the devices not
supporting WX_FLAG_MULTI_64_FUNC, i.e., NGBE devices. A mask of 0 causes
__ALIGN_MASK(1, ~vmdq->mask) to return 0, which incorrectly sets
q_per_pool to 0 in wx_write_qde().
Fix the VMDQ 1-queue mask to 0x7F then ensures that __ALIGN_MASK(1,
~0x7F) correctly evaluates to 1.
Fixes: c52d4b8989 ("net: libwx: Redesign flow when sriov is enabled")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/161F704D2C983E2C+20260626092530.551028-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ffa_partition_info_get() passes uuid_str directly to uuid_parse()
without a NULL check. When a caller passes NULL, uuid_parse() ->
__uuid_parse() -> uuid_is_valid() dereferences the pointer, causing
a kernel panic:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000040
| pc : uuid_parse+0x40/0xac
| lr : ffa_partition_info_get+0x1c/0x94 [arm_ffa]
Add a NULL guard before uuid_parse() so a NULL argument returns
-ENODEV instead of crashing. Callers are expected to always supply
a valid partition UUID, so NULL is not a supported input.
Fixes: d0c0bce831 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Link: https://patch.msgid.link/20260617-ffa_partition_nullptr_fix-v2-1-bc801b4ce34c@oss.qualcomm.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Set the GDM maximum receive size to AIROHA_MAX_RX_SIZE unconditionally
during hardware initialization instead of updating it according to the
configured MTU. This avoids dropping incoming frames that exceed the
current MTU but could still be processed by the networking stack, which
is able to fragment the reply on the TX side (e.g. ICMP echo requests).
Move the per-port MTU configuration to the PPE egress path where it
belongs, and set the tx frame size running airoha_ppe_set_xmit_frame_size()
to dynamically track the maximum MTU across running interfaces sharing
the same PPE instance.
Fix the PPE MTU register addressing to pack two port entries per
register word and add WAN_MTU0 configuration for non-LAN GDM devices.
Fixes: 54d989d58d ("net: airoha: Move min/max packet len configuration in airoha_dev_open()")
Tested-by: Madhur Agrawal <madhur.agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260625-airoha-fix-rx-max-len-v1-1-45b9b827358d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended.
Fixes: 034e38e8f6 ("USB: serial: keyspan_pda: add write-fifo support")
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Johan Hovold <johan@kernel.org>
The Nuvoton NCT6126D Super-I/O is available in two hardware revisions.
According to the manufacturer datasheet revision 2.4, version A reports
chip ID 0xD283, while version B reports chip ID 0xD284.
The driver currently only recognizes only the version A ID. Version B
only contains hardware fixes unrelated to the GPIO functionality, so it
can be supported by simply adding its chip ID without any other driver
changes.
Fixes: 3002b8642f ("gpio-f7188x: fix chip name and pin count on Nuvoton chip")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Link: https://patch.msgid.link/20260629-gpio-f7188x-nct6126d-version-b-v1-1-a06226c02a2d@bootlin.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The HDCP 2.2 specification requires the seq_num_v to be monotonically
increasing, and repeated seq_num_v needs to be treated as an integrity
failure. Make it so.
For the first message, seq_num_v must be zero, and is already
checked. We can only check for less-than-or-equal for the subsequent
messages, where hdcp2_encrypted is true.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d849178e2c ("drm/i915: Implement HDCP2.2 repeater authentication")
Cc: stable@vger.kernel.org # v5.2+
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260625104407.1025614-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 58a224375c81179b52558c53d8857b93196d2687)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
For file-backed mounts, set sb->s_id to the MAJOR:MINOR of sb->s_dev
(which fstat() will return) so that kernel messages and the sysfs
name are more informative rather than just "erofs: (device erofs): ...".
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Commit 555c765b0c ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&dev->dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse->mdev.
Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.
Fixes: 6b3480855a ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0c ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Haoxiang Li
Masami Hiramatsu (Google)
Sechang Lim
Martin Kaiser
Sneh Mankad
Sergio Paracuellos
Matt Bobrowski
Boris Brezillon
Gustavo Kenji Mendonça Kaneko
Peiyang He
Cen Zhang
Tejun Heo
Viacheslav Bocharov
Qianyu Luo
Ido Schimmel
Bryam Vargas
Jani Nikula
Jamal Hadi Salim
Rosen Penev
Andrea Righi
Shubham Nayak
Geert Uytterhoeven
Jiawen Wu
Unnathi Chalicheemala
Lorenzo Bianconi
Johan Hovold
Paul Louvel
Joonas Lahtinen
Gao Xiang
Florian Fuchs