Sashiko detected potential coefficient overflow if large shunt resistor
is used. When going unnoticed it can cause "drastically incorrect
telemetry scaling factors" as Sashiko put it.
I am not convinced such "drastically incorrect telemetry scaling
factors" could have gone unnoticed, so I suspect such large shunt
resistors aren't really used. Well, it shouldn't hurt to detect the
error and abort the probe before Really Wrong current / power -values
are reported to user by the hwmon.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/d9e3320dbd62e094ff89598cb3aac5b5e716f9e7.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 87102808d0 ("hwmon: (pmbus/adm1275) Validate device ID")
Link: https://lore.kernel.org/r/c8ad38e0cdb347261c6245de2b7965e747f28d22.1782458224.git.mazziesaccount@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
w83627hf_probe() creates cpu0_vid and vrm with device_create_file() when
VID information is available.
The error path and remove callback only remove the common and optional
attribute groups. Those groups do not contain cpu0_vid or vrm, so the
files can remain after a later probe failure or after device removal
while their callbacks still expect live driver data.
Remove the standalone VID sysfs files from both the probe error path and
the remove callback.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064732.48113-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
w83793_probe() creates the vrm sysfs file after creating the VID files
when VID support is present.
The normal remove path deletes vrm, but the probe error path only
removes the sensor, SDA, VID, fan, PWM and temperature files. A later
probe failure can therefore leave vrm behind after the driver data has
been freed.
Remove vrm in the probe error path next to the VID files, matching the
normal remove path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20260615064806.51139-1-pengpeng@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The nointxmask and disable_idle_d3 module parameters remain writable,
but vfio-pci now latches their values into each device at init. Once a
device is registered, changing the module parameter only affects future
devices, leaving no direct way to confirm the effective policy for an
existing device.
Add a pci debugfs directory under the VFIO device debugfs root and
report the per-device nointxmask and disable_idle_d3 values. These are
read-only debugfs views and use the same Y/N bool output convention as
the module parameters.
Read-only vfio-pci parameters, such as disable_vga, are not exposed here
because they cannot drift from the latched device value, therefore the
existing module parameter exposure via sysfs is sufficient.
Note that while only vfio-pci currently provides these options, the
implementation is in vfio-pci-core and therefore properly reflects the
device policy in the core, regardless of driver.
Assisted-by: OpenAI Codex:gpt-5
Cc: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-7-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
VFIO device debugfs files created with debugfs_create_devm_seqfile()
store a devres allocated debugfs_devm_entry as inode private data.
vfio_unregister_group_dev() currently calls vfio_device_del() before
vfio_device_debugfs_exit(), but device_del() releases devres. This can
leave debugfs entries visible with stale inode private data while
unregister waits for userspace references to drain.
Remove the per-device debugfs tree before vfio_device_del(). The debugfs
view is diagnostic only, so losing it at the start of unregister is
preferable to preserving entries whose backing storage may already have
been released.
Complete the teardown by clearing the per-device debugfs root after
removal. This matches the global debugfs root cleanup and prevents
future users from mistaking a removed dentry for a live debugfs tree
during the remainder of unregister.
Fixes: 2202844e44 ("vfio/migration: Add debugfs to live migration driver")
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260615192725.6A2221F000E9@smtp.kernel.org
Cc: stable@vger.kernel.org
Cc: Longfang Liu <liulongfang@huawei.com>
Assisted-by: OpenAI Codex:gpt-5
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615204717.735302-1-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
A child sub-scheduler dereferences its parent scx_sched throughout its life,
e.g., in scx_sub_disable() which reparents the child's tasks and calls
parent->ops.sub_detach() after unlinking from the parent. However, the
parent is pinned only through parent->sub_kset, which is dropped during
disable. The parent scx_sched can be RCU-freed while a child is still
disabling.
Take a direct reference on the parent in scx_alloc_and_add_sched(), dropped
in scx_sched_free_rcu_work(), so a parent always outlives its descendants.
Signed-off-by: Tejun Heo <tj@kernel.org>
The vfio-pci module parameters of disable_idle_d3, nointxmask, and
disable_vga latch vfio-pci policy into vfio-pci-core globals each time
the vfio-pci module is initialized. The disable_idle_d3 parameter has
already migrated to a per-device flag in order to provide consistency
for refcounted PM operations for the lifetime of the device
registration.
Pull the remaining vfio-pci module-parameter policy out of vfio-pci-core
into per-device flags set at device initialization.
This also restores the mutable aspect of the disable_idle_d3 and
nointxmask module parameters for vfio-pci, with the caveat that the
parameters are latched into the device at probe.
A notable change for variant drivers is that their devices are no longer
affected by vfio-pci module parameters and those drivers may need to
adopt similar module parameters if any devices have a hidden dependency
on vfio-pci setting non-default policy.
Assisted-by: Claude:claude-opus-4-8
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-6-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note mlx5_vhca_page_tracker.status is relocated to fill the alignment
hole this split exposes.
Bitfield justifications:
migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe
chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe
mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe
Dedicated storage units:
mdev_detach: written in the VF attach/detach event notifier
mlx5fv_vf_event() at runtime
log_active: written in mlx5vf_start_page_tracker()/
mlx5vf_stop_page_tracker() during runtime dirty tracking
deferred_reset: written in mlx5vf_state_mutex_unlock()/
mlx5vf_pci_aer_reset_done() during runtime reset handling
is_err: set by tracker error handling and dirty-log polling at runtime
object_changed: set by tracker event handling and cleared by dirty-log
polling at runtime
Fixes: 61a2f1460f ("vfio/mlx5: Manage the VF attach/detach callback from the PF")
Fixes: 79c3cf2799 ("vfio/mlx5: Init QP based resources for dirty tracking")
Fixes: f886473071 ("vfio/mlx5: Add support for tracker object change event")
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-5-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note that the virq_disabled and bardirty flags are relocated to fill
an existing hole in the structure.
Bitfield justifications:
has_dyn_msix: written only in vfio_pci_core_enable()
pci_2_3: written only in vfio_pci_core_enable()
reset_works: written only in vfio_pci_core_enable()
extended_caps: written only in vfio_cap_len() under vfio_config_init()
has_vga: written only in vfio_pci_core_enable()
nointx: written only in vfio_pci_core_enable()
needs_pm_restore: written only in vfio_pci_probe_power_state()
disable_idle_d3: written only at .init in vfio_pci_core_init_dev()
Dedicated storage units:
virq_disabled: written by guest INTx command writes in
vfio_basic_config_write() while the device is open
bardirty: written by guest BAR writes in vfio_basic_config_write()
while the device is open
pm_intx_masked: written in the runtime-PM suspend path.
pm_runtime_engaged: written by low-power feature entry/exit paths
needs_reset: set in vfio_pci_core_disable() and cleared for devices in
the set by vfio_pci_dev_set_try_reset()
sriov_active: written by vfio_pci_core_sriov_configure() via sysfs
sriov_numvfs while bound.
Fixes: 9cd0f6d5cb ("vfio/pci: Use bitfield for struct vfio_pci_core_device flags")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-4-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout.
Fixes: 4aeec3984d ("vfio/pci: Re-order vfio_pci_probe()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-3-lizhi.hou@amd.com
amdxdna_remove() destroys notifier_wq. If amdxdna_gem_obj_free() is
called after device removal, it may attempt to flush notifier_wq,
resulting in a use-after-free.
Fix the race by allocating notifier_wq with
drmm_alloc_ordered_workqueue(), so its lifetime is managed by DRM and
remains valid until all managed resources are released.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-2-lizhi.hou@amd.com
In amdxdna_remove(), all amdxdna_client structures are freed after
calling drm_dev_unplug(). However, drm_dev_unplug() does not force
existing file descriptors to be closed, so amdxdna_drm_close() may be
called after amdxdna_remove() has completed.
As a result, accessing client->pid for debug output in
amdxdna_drm_close() can lead to a use-after-free, since the access is
not protected by drm_dev_enter().
Fix this by decoupling hardware teardown from client cleanup.
amdxdna_remove() only performs hardware-related cleanup, while
per-client resources are released from amdxdna_drm_close() when the
corresponding file is closed.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-1-lizhi.hou@amd.com
Even with proper dma engine support, the first spi transfer always
fallback to PIO, the reason is the dws->n_bytes is 0 after
initialization, so the dw_spi_can_dma() calling from __spi_map_msg()
return false, thus both tx_sg_mapped and rx_sg_mapped are false, so
for the first spi transfer, the spi_xfer_is_dma_mapped() reports false
thus fallback to PIO.
Although this brings no harm, we can simply fix this issue by
calcuating the "n_bytes" from xfer->bits_per_word.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260615044039.9750-2-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first. Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read.
Fixes: 9e6eba610c ("hwmon: (asus_atk0110) Enable the EC")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://lore.kernel.org/r/20260619122746.721981-1-sammiee5311@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Expand the table borders (upper & lower) to prevent a documentation
build error:
Documentation/hwmon/ltc4283.rst:261: ERROR: Malformed table.
Text in column margin in table line 3.
======================= ==========================================
power1_failed_fault_log Set to 1 by a power1 fault occurring.
power1_good_input_fault_log Set to 1 by a power1 good input fault occurring at PGIO3.
Fixes: dd63353a0b ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260620011833.3568693-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude:claude-opus-4-7 [Claude Code]
Link: https://lore.kernel.org/r/20260620-pmbus-data2reg-vid-v1-1-5518030432c4@nexthop.ai
Fixes: 068c227056 ("hwmon: (pmbus) Add support for VR12")
Fixes: d4977c083a ("hwmon: (pmbus) Add support for Intel VID protocol VR13")
Fixes: 9d72340b6a ("hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes")
Fixes: 969a4ec86c ("hwmon: (pmbus/core) Add support for NVIDIA nvidia195mv mode")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
occ_active(false) and occ_shutdown() unregister sysfs-backed devices while
occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can
wait for active sysfs callbacks to drain, and those callbacks can enter the
OCC update path and try to take occ->lock again. That gives the unregister
paths the lock ordering occ->lock -> sysfs callback drain, while a callback
has the opposite edge sysfs callback -> occ->lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real unregister and callback carrier:
occ_shutdown()
hwmon_device_unregister()
occ_show_temp_1()
occ_update_response()
Lockdep reported the circular dependency with occ_shutdown() already
holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs
side:
WARNING: possible circular locking dependency detected
... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv]
... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv]
occ_update_response.isra.0+0xb/0x20 [vuln_msv]
occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv]
*** DEADLOCK ***
Serialize hwmon registration and removal with a separate hwmon_lock.
Under that lock, detach occ->hwmon and update occ->active while occ->lock
is held so concurrent OCC state changes still see a stable state, then
drop occ->lock before calling hwmon_device_unregister(). Remove the
driver sysfs group before taking occ->lock in occ_shutdown(), so draining
the driver attributes cannot wait while the OCC mutex is held. Also make
OCC update callbacks return -ENODEV after deactivation, so callbacks that
already passed sysfs active protection do not poll the hardware after
teardown has detached the hwmon device.
Fixes: 849b0156d9 ("hwmon: (occ) Delay hwmon registration until user request")
Fixes: ac6888ac5a ("hwmon: (occ) Lock mutex in shutdown to prevent race with occ_active")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://lore.kernel.org/r/20260619015938.494464-1-runyu.xiao@seu.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
mtk_ecc_wait_idle() logs when the encoder or decoder does not become
idle, but returns void. Callers can therefore configure a non-idle ECC
engine or read parity bytes after an unconfirmed encoder idle state.
Return the idle poll result and propagate it from the enable and encode
paths that require the engine to be idle before continuing.
Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtdswap_add_debugfs() creates an mtdswap_stats debugfs file under the
per-MTD debugfs directory, but mtdswap_remove_dev() never removes it
before freeing the mtdswap_dev.
Store the returned dentry and remove it during device teardown before the
driver-private state is freed.
Fixes: a321590246 ("mtd: Add mtdswap block driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtd_add_partition() checks that 'length' is positive but does not
validate that 'offset + length' fits within the parent partition's
size. A userspace caller using the BLKPG_ADD_PARTITION ioctl can
supply a crafted large 'length' value that passes the length <= 0
check, causing add_mtd_device() to fire a WARN_ON() when it detects
the oversized partition.
Fix this by adding explicit bounds checks before allocate_partition()
is called:
- Reject negative or out-of-range offsets.
- Use u64 arithmetic to safely check offset + length <= parent_size,
avoiding potential signed integer overflow.
Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When parsing partition layouts, if a partition requested with
MTDPART_OFS_RETAIN runs out of space, the allocator jumps directly
to 'out_register' to preserve partition numbering.
However, this jump bypasses child->erasesize initialization, leaving
it at zero. When add_mtd_device() is later called on this child, the
registration fails and triggers a WARN_ON() due to the zero ->erasesize.
Fix this by zeroing out child->part.offset and child->part.size, and
initializing child->erasesize to parent->erasesize. This is the exact
same pattern already used just a few lines below in the "out of reach"
error check (child->part.offset >= parent_size) to safely register a
disabled partition.
Reported-by: syzbot+3ae80219c633aca5431c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3ae80219c633aca5431c
Signed-off-by: Nikolay Ivchenko <nivchenko.dev@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When compile-testing on x86 without CONFIG_OF, the ndfc driver produces
a harmless warning:
drivers/mtd/nand/raw/ndfc.c: In function 'ndfc_probe':
include/linux/dev_printk.h:154:31: error: 'len' is used uninitialized [-Werror=uninitialized]
154 | dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^
drivers/mtd/nand/raw/ndfc.c:196:17: note: in expansion of macro 'dev_err'
196 | dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
Limit compile-testing to configurations with CONFIG_OF to trivially
avoid this. The driver will still be built in allmodconfig and many
randconfig builds.
Fixes: 4f2692a538 ("mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
spinand_mtd_regular_page_read() returns ret after iterating over the
requested pages. If the request contains no data or OOB bytes, the
iterator does not run and ret is not assigned. Initialize it to 0 for the
empty request path.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a
use-after-free.
Fix it by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy().
Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
ingenic_ecc_get() obtains a provider device reference and then enables
the ECC clock before returning the ECC handle.
The clk_prepare_enable() return value is currently ignored. If enabling
the clock fails, the function still returns the ECC handle and keeps the
provider device reference even though the acquire operation did not
complete.
Return the clock enable error and drop the provider device reference on
that failure path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtk_ecc_get() gets a reference to the ECC platform device, obtains the
provider state and then enables the ECC clock before initializing the
hardware.
The clk_prepare_enable() return value is currently ignored. If enabling
the clock fails, the code still touches the ECC registers and returns a
live ECC handle to the caller. The provider device reference acquired
by of_find_device_by_node() is also kept even though the handle setup
failed.
Propagate the clock enable error and drop the provider device reference
on that failure path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
mtd_concat_destroy() frees item->concat so calling
mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free.
Fix this by moving mtd_virt_concat_put_mtd_devices() before
mtd_concat_destroy()
Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
According to both the static definition in downstream...
yupik-audio-overlay.dtsi: qcom,bolero-version = <4>;
#define BOLERO_VERSION_2_0 0x0004)
and the runtime detection:
CDC_VA_TOP_CSR_CORE_ID_0=0x1
CDC_VA_TOP_CSR_CORE_ID_1=0xf
SC7280 has LPASS Codec Version 2.0 and not, as declared with
sm8250_va_data LPASS_CODEC_VERSION_1_0.
Create new va_macro_data with .version not set to use the runtime
detection and correctly get .version = LPASS_CODEC_VERSION_2_0.
Fixes: 77212f300b ("ASoC: codecs: lpass-va-macro: set the default codec version for sm8250")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526-sc7280-va-macro-2-0-v1-1-2c1b572fa388@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.
That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.
For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.
This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request.
Fixes: fa619a7704 ("[PATCH] IB: Add RMPP implementation")
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/3170ff3bc389a930bb1641f2caa394a0b2241579.1780774907.git.michael.bommarito@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array.
Cc: stable@vger.kernel.org
Signed-off-by: Baineng Shou <shoubaineng@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 575ec9b0c2 ("dma-fence: Add helper to sort and deduplicate dma_fence arrays")
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260629031346.3875683-1-shoubaineng@gmail.com
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".
A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).
This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.
Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.
These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.
Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name().
Cc: stable@vger.kernel.org
Fixes: f4cc3ab824 ("dma-buf: protected fence ops by RCU v8")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20260629075636.2513214-2-phasta@kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>
Starting with Rust 1.98.0 (expected 2026-08-20), Rust is introducing a
couple new lints, `invalid_runtime_symbol_definitions` (deny-by-default)
and `suspicious_runtime_symbol_definitions` (warn-by-default), which check
the signature of items whose symbol name is a runtime symbol expected by
`core`.
Our build hits the second one, i.e. the warning:
error: suspicious definition of the runtime `strlen` symbol used by the standard library
--> rust/bindings/bindings_generated.rs:20018:5
|
20018 | pub fn strlen(s: *const ffi::c_char) -> usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: expected `unsafe extern "C" fn(*const i8) -> usize`
found `unsafe extern "C" fn(*const u8) -> usize`
= help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
= help: allow this lint if the signature is compatible
= note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`
error: suspicious definition of the runtime `strlen` symbol used by the standard library
--> rust/uapi/uapi_generated.rs:14236:5
|
14236 | pub fn strlen(s: *const ffi::c_char) -> usize;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: expected `unsafe extern "C" fn(*const i8) -> usize`
found `unsafe extern "C" fn(*const u8) -> usize`
= help: either fix the signature or remove any attributes like `#[unsafe(no_mangle)]`, `#[unsafe(export_name = "strlen")]`, or `#[link_name = "strlen"]`
= help: allow this lint if the signature is compatible
= note: `-D suspicious-runtime-symbol-definitions` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(suspicious_runtime_symbol_definitions)]`
Thus `allow` the lint in `bindings` and `uapi`.
A more targeted alternative to avoid `allow`ing it would be to pass
`--blocklist-function strlen` to `bindgen`, but we would perhaps need
to adjust if other C headers end up adding more (or Rust checking more).
Since it is just the less critical one that we hit, and since eventually
this should be properly fixed by getting upstream Rust to provide a flag
like GCC/Clang's `-funsigned-char` [2][3], just `allow` it for now.
Cc: Urgau <urgau@numericable.fr>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/155521 [1]
Link: https://github.com/rust-lang/rust/issues/138446 [2]
Link: https://github.com/Rust-for-Linux/linux/issues/355 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260615143225.471756-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The C1-Pro SME DVMSync workaround currently samples mm_cpumask() from
arch_tlbbatch_add_pending(). It requires a DSB after every batched TLBI
so that the mask read is ordered after the hardware DVMSync, defeating
much of the reclaim batching benefit.
Introduce the sme_active_cpus mask tracking which CPUs run in user-space
with SME enabled and use it for batch flushing instead of accumulating
the mm_cpumask() of the unmapped pages.
Fixes: 0baba94a97 ("arm64: errata: Work around early CME DVMSync acknowledgement")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Tested-by: Joshua Liu <josliu@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
On arm64, when booting with `maxcpus` greater than the number of present
CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present'
but have not yet been registered via register_cpu(). Consequently,
the per-cpu device objects for these CPUs are not yet initialized.
In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling
_cpu_up() for these unregistered CPUs eventually leads to
sysfs_create_group() being called with a NULL kobject (or a kobject
without a directory), triggering the following warning in
fs/sysfs/group.c:
WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181
[...]
Call trace:
internal_create_group+0x41c/0x4bc (P)
sysfs_create_group+0x18/0x24
topology_add_dev+0x1c/0x28
cpuhp_invoke_callback+0x104/0x20c
__cpuhp_invoke_callback_range+0x94/0x11c
_cpu_up+0x200/0x37c
When booting with ACPI, arm64 smp_prepare_cpus() currently sets all
enumerated CPUs as "present" regardless of their status in the MADT. This
causes issues with SMT hotplug control. For instance, with QEMU's
"-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as
follows:
1. The first four CPUs: `Enabled` set but `Online Capable` not set.
2. The remaining four CPUs: `Online Capable` set but `Enabled` not set
to support potential hot-plugging.
Fix this by:
1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC
entry before calling set_cpu_present() during SMP initialization.
2. Properly managing the present mask in acpi_map_cpu() and
acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with
other architectures like x86 and LoongArch.
3. Update the arm64 CPU hotplug documentation to no longer state that all
online-capable vCPUs are marked as present by the kernel at boot time.
This ensures that only physically available or explicitly enabled CPUs
are in the present mask, keeping the SMT control logic consistent with
the actual hardware state.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: stable@vger.kernel.org
Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#gic-cpu-interface-gicc-structure
Fixes: eed4583bcf ("arm64: Kconfig: Enable HOTPLUG_SMT")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Sashiko review pointed out the following issue[1].
Commit eba4675008 ("arm64: arch_register_cpu() variant to check if
an ACPI handle is now available.") introduced architectural safety
blocks inside arch_unregister_cpu(). If a hot-unplug operation is
determined to be a physical hardware removal (where _STA evaluates to
!ACPI_STA_DEVICE_PRESENT), or if firmware evaluation fails, it aborts
the unregistration transaction early to protect unreadied arm64
infrastructure.
However, returning early from arch_unregister_cpu() causes a catastrophic
state tearing because the generic ACPI layer (acpi_processor_post_eject())
unconditionally continues its cleanup flow. This leaves the stale sysfs
device leaked in the memory, deadlocking any subsequent hot-add attempts
on the same CPU.
Fix it by simplifying arch_unregister_cpu() to always proceed with
the unregistration, as a pr_err_once() warning is sufficient to make
it more visible for currently not supported physical CPU removal.
Also remove the redundant NULL check on acpi_handle as it cannot be
NULL when calling arch_unregister_cpu().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260520022023.126670-1-ruanjinjie@huawei.com [1]
Fixes: eba4675008 ("arm64: arch_register_cpu() variant to check if an ACPI handle is now available.")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
In capture_urb_complete(), usb_anchor_urb() is called on every
completion callback, but the URB is already anchored from the
initial submission in tascam_trigger_start(). Each redundant call
corrupts the anchor's doubly-linked list and inflates the URB
refcount. When usb_kill_anchored_urbs() traverses the list during
stream stop / suspend / disconnect, the corrupted list leads to
use-after-free.
Remove the redundant usb_anchor_urb() from the resubmit path.
Cc: stable@vger.kernel.org
Fixes: c1bb0c13e4 ("ALSA: usb-audio: us144mkii: Implement audio capture and decoding")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260627042949.61767-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
FFA_FEATURES reports the minimum size and alignment boundary required
for RXTX_MAP. In FF-A v1.2 and later it can also report a maximum buffer
size, with zero meaning that no maximum is enforced.
The driver only used the minimum value and then rounded it up to PAGE_SIZE
before invoking RXTX_MAP after commit 83210251fd ("firmware: arm_ffa:
Use the correct buffer size during RXTX_MAP"). On systems where PAGE_SIZE
is larger than the advertised minimum, this can exceed a non-zero maximum
reported by firmware. Older implementations do not advertise a maximum and
may also reject the rounded-up size.
Decode the maximum size and clamp the page-aligned minimum to it when it
is present. If no maximum is advertised and RXTX_MAP rejects the rounded
size with INVALID_PARAMETERS, retry with the advertised minimum size.
Record drv_info->rxtx_bufsz only after RXTX_MAP succeeds so it reflects
the size registered with firmware.
While there, also update RXTX_MAP_MIN_BUFSZ() to use FIELD_GET() for
consistency.
Fixes: 83210251fd ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP")
Suggested-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Seth Forshee <sforshee@nvidia.com>
Link: https://patch.msgid.link/20260602-b4-ffa-rxtx-map-fixes-v2-1-7cb06508da84@nvidia.com
(sudeep.holla: Minor rewording subject and commit message)
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
If the port is closed while throttled, the read urb is never resubmitted
and the port will not receive any further data until the device is
reconnected (or the driver is rebound).
Clear the throttle flags and submit the urb if needed when opening the
port.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Matti Vaittinen
Joshua Crofts
Pengpeng Hou
Alex Williamson
Tejun Heo
Vijendar Mukunda
Lizhi Hou
Jisheng Zhang
Maarten Lankhorst
HyeongJun An
Randy Dunlap
Abdurrahman Hussain
Runyu Xiao
Fabio Porcedda
Deepanshu Kartikey
Nikolay Ivchenko
Arnd Bergmann
Ruoyu Wang
Harshit Mogalapalli
Rosen Penev
Luca Weiss
Michael Bommarito
Baineng Shou
Philipp Stanner
Anshuman Khandual
Miguel Ojeda
Catalin Marinas
Jinjie Ruan
WenTao Liang
Seth Forshee
Johan Hovold