The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
`CONFIG_PHY_INGENIC_USB`.
The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
symbol. That symbol no longer carries the provider object, so the
defconfigs lose the intended USB PHY provider after olddefconfig.
Use `CONFIG_PHY_INGENIC_USB` instead.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since the commit 91840be8f7 ("irq_work: Fix use-after-free in
irq_work_single() on PREEMPT_RT"), we observed the performance of
execve() is significantly impacted on MIPS.
While we are unsure how that commit caused the impact or how to improve
it (or even if it can be improved at all), implementing IRQ work with
self-IPI seems able to mitigate the impaction.
Perhaps this can/should be implemented for other MIPS architecture
processors as well, but we don't have the enough knowledge of them, nor
access to the hardware. So only implement it for loongson64 here.
Link: https://lore.kernel.org/6be1cdd5f91dd7418a32ff372a6f3ae259b19195.camel@xry111.site/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If a device has less physical memory than the highmem threshold
bootmem_init() doesn't set highstart_pfn. This results in highmem_init()
wrongly disabling the entire memory range if the cpu doesn't support
highmem. Add a check that highstart_pfn is non zero before removing the
highmem block.
Fixes: f171b55f14 ("mips: fix HIGHMEM initialization")
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Switch RTC platform device registration from platform_device_register()
to platform_add_devices() so as to make sure any failure will result in
automatic device unregistration.
Fixes: fae67ad431 ("arch/mips/dec: switch DECstation systems to rtc-cmos")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event().
Fixes: 97b741aba9 ("HID: lg-g15: Add keyboard and LCD backlight control")
Cc: stable@vger.kernel.org
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2 ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count.
Fixes: b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer.
Fixes: 2c85c61d13 ("HID: pass the buffer size to hid_report_raw_event")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In picolcd_send_and_wait(), an integer overflow of the signed loop counter
'k' can theoretically lead to a NULL pointer dereference of 'raw_data'.
If the loop executes more than INT_MAX times, 'k' becomes negative,
making the condition 'k < size' true even when 'size' is 0.
Change the type of 'k' to 'unsigned int' to prevent the overflow and
eliminate the out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
[jkosina@suse.com: extended hash length]
Fixes: fabdbf2fd2 ("HID: picoLCD: split driver code")
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af9292 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced.
Fixes: 9a4a5574ce ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Khadka <maskmemanish@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data.
Fixes: 33a5c27934 ("HID: Add new Letsketch tablet driver")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Khadka <maskmemanish@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In xrep_agfl_fill(), the call to xagb_bitmap_set() passes
'agbno - 1' as the length argument. However, xagb_bitmap_set()
expects a length (number of blocks), not an end block number.
Passing 'agbno - 1' causes used_extents to record an incorrect
range.
Fix this by calculating the correct length as 'agbno - start',
which represents the actual number of blocks filled into the AGFL.
Signed-off-by: jiazhenyuan <jiazhenyuan@uniontech.com>
Fixes: 014ad53732 ("xfs: use per-AG bitmaps to reap unused AG metadata blocks during repair")
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Look at the __GFP_NORETRY flag set for readahead so that we don't
have to pass both the gfp_t and the flags in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_alloc_backing_mem currently has two issues with how the GFP_
flags are set:
- when aiming for a large folio allocation, the gfp mask is adjusted
to try less hard, but these flags then persist for the vmalloc
allocation, which is bogus.
- the __GFP_NOFAIL for small allocations is also applied when readahead
force __GFP_NORETRY which doesn't make any sense.
Fix this by only applying __GFP_NOFAIL when __GFP_NORETRY is not set,
and by reordering the code so that the large folio gfp adjustments
are performed locally just for that allocation.
Fixes: 94c78cfa3b ("xfs: convert buffer cache to use high order folios")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The current __GFP_NOFAIL setting is wrong in some cases. Prepare
for fixing that by giving control to the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Split out helpers for folio and vmalloc allocations to prepare for a bug
fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=1
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The digi_write_inb_command() is supposed to wait for the write urb to
become available or return an error, but instead it updates the transfer
buffer and tries to resubmit the urb on timeout.
To make things worse, for commands like break control where no timeout
is used, the driver would corrupt the urb immediately due to a broken
jiffies comparison (on 32-bit machines this takes five minutes of uptime
to trigger due to INITIAL_JIFFIES).
Fix this by adding the missing return on timeout and waiting
indefinitely when no timeout has been specified as intended.
This issue was (sort of) flagged by Sashiko when reviewing an unrelated
change to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=11
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: be1db4f661 ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate
the buffer behind the skb. Variables which were pointing to the old buffer
need to be reassigned to avoid an use-after-free.
Cc: stable@vger.kernel.org
Fixes: 9e794b6bf4 ("batman-adv: drop unicast packets from other backbone gw")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
Cc: stable@vger.kernel.org
Fixes: b61ec31c85 ("batman-adv: Snoop DHCPACKs for DAT")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
Cc: stable@vger.kernel.org
Fixes: 6c413b1c22 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the ethernet header but missed for the
unicast_packet pointer.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: c018ad3de6 ("batman-adv: add the VLAN ID attribute to the TT entry")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind
the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free.
This was done correctly for the VLAN header but missed for the ethernet
header which is later used for the TT and AP isolation handling.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Fixes: c78296665c ("batman-adv: Check skb size before using encapsulated ETH+VLAN header")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Map xmit skb fragments using skb_frag_dma_map() instead of
dma_map_single(skb_frag_address()). skb_frag_address() relies on
page_address() to obtain a kernel virtual address, which is not
guaranteed to work for all page types (e.g. highmem pages or
user-pinned pages from MSG_ZEROCOPY).
skb_frag_dma_map() maps the fragment directly via its struct page and
offset through dma_map_page(), avoiding the need for a kernel virtual
address entirely.
Introduce an enum airoha_dma_map_type to track how each queue entry was
mapped (single vs page), so that the matching unmap function is called
on completion and in error paths.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260625-airoha-eth-skb_frag_dma_map-v1-1-31d9e460aae6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tag_8021q.c tagger calls vlan_insert_tag() in dsa_8021q_xmit().
vlan_insert_tag() will consume the skb with kfree_skb() on failure
and return NULL.
When NULL is returned as error code to ->xmit() in dsa_user_xmit()
it will free the same skb again leading to a double-free.
The idea of dsa_user_xmit() and dsa_switch_rcv() dropping the skb
they held before the call to ->xmit() and ->rcv() is conceptually
wrong: the pattern elsewhere in the networking code is that consumers
drop their skb:s on failure.
Modify the ->xmit() and ->rcv() call sites to not drop the SKB if
the taggers return NULL from any of these calls. Move those drops into
the taggers so every callback error path that retains ownership consumes
the skb before returning NULL.
Keep the existing helper ownership rules: VLAN insertion helpers already
free on failure (this is the case in tag_8021q.c), while deferred
transmit paths either transfer the skb reference to worker context or
hold a worker reference with skb_get() and drop the caller's reference.
For SJA1105 meta RX, transfer the buffered stampable skb under the meta
lock and return NULL while the skb is waiting for its meta frame: the
skb is not dropped in this case.
NOTICE: Backporting patches to taggers (e.g. for stable kernels) after
this point cannot be mechanical or they will introduce double
kfree_skb().
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/r/20260610153952.1685895-1-kuba@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Yang <mmyangfl@gmail.com> # yt921x
Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek
Reviewed-by: Wei Fang <wei.fang@nxp.com> # netc
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260625-dsa-fix-free-skb-v5-1-b5931e4cbdb0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In SCTP handshake, the INIT chunk is initially processed by the server
and embedded into the cookie carried in INIT-ACK. The client then
returns this cookie via COOKIE-ECHO, where the server unpacks it and
reconstructs the original INIT chunk.
When cookie authentication is enabled, the cookie contents are protected
against tampering, so reusing the unpacked INIT without re-verification
is safe.
However, when cookie authentication is disabled, the reconstructed INIT
can no longer be trusted. In this case, the INIT must be explicitly
validated after unpacking to avoid processing potentially tampered data.
Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO
processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook())
when cookie_auth_enable is disabled. On failure, the new association is
freed and the packet is discarded.
Also tighten cookie validation in sctp_unpack_cookie() by verifying the
embedded chunk type is SCTP_CID_INIT before treating it as an INIT
chunk.
Finally, update sctp_verify_init() to validate parameter bounds using
the actual embedded INIT length instead of chunk->chunk_end, since the
INIT stored in COOKIE-ECHO may not span the entire chunk buffer.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/ebcbbac574815b0850f371b4bdb02f2e602b94d3.1782341592.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a use-after-free error on netpoll, which is clearly detected by
KASAN.
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0x3b/0x80
Read of size 1 at addr ... by task kworker/9:1
Workqueue: events queue_process
Call Trace:
skb_dequeue+0x1e/0xb0
queue_process+0x2c/0x600
process_scheduled_works+0x4b6/0x850
worker_thread+0x414/0x5a0
Allocated by task 242:
__netpoll_setup+0x201/0x4a0
netpoll_setup+0x249/0x550
enabled_store+0x32f/0x380
Freed by task 0:
kfree+0x1b7/0x540
rcu_core+0x3f8/0x7a0
The problem happens when there is a pending TX worker running in
parallel with the cleanup path.
This is what happens on netpoll shutdown path:
1) __netpoll_cleanup() is called
2) set dev->npinfo to NULL
3) call_rcu() with rcu_cleanup_netpoll_info()
3.1) rcu_cleanup_netpoll_info() tries to cancel all workers with
cancel_delayed_work(), but doesn't wait for the worker to finish
4) and kfree(npinfo);
Because 3.1) doesn't really cancel the work, as the comment says "we
can't call cancel_delayed_work_sync here, as we are in softirq", the TX
worker can run after 4).
Tl;DR: queue_process() is not an RCU reader, it reaches npinfo through
the work item via container_of().
Use disable_delayed_work_sync() to ensure the worker is completely
stopped and prevent any future re-arming attempts. Once npinfo is set
to NULL, senders will bail out and not queue new work. The disable flag
ensures any in-flight re-arming attempts also fail silently.
In the future, we can do the cleanup inline here without needing the
npinfo->rcu rcu_head, but that is net-next material.
Cc: stable@vger.kernel.org
Fixes: 38e6bc185d ("netpoll: make __netpoll_cleanup non-block")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260625-netpoll_rcu_fix-v2-1-0748ffac1e98@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SCTP_RESET_STREAMS carries a flexible array of u16 stream IDs, but the
optlen clamps treat USHRT_MAX as a byte count and then multiply
sizeof(__u16) by the fixed header size.
That caps the copied and validated option buffer at about 64 KiB, which
rejects valid requests containing more than about half of the u16 stream
ID range.
Use struct_size_t() for the maximum struct sctp_reset_streams layout
instead, so the bound matches the flexible array described by
srs_number_streams.
Fixes: 5960cefab9 ("sctp: add a ceiling to optlen in some sockopts")
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260625142354.2600-1-alhouseenyousef@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the
number of fragments contained in xdp_frame may be greater than or equal
to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr
to be out of bounds.
Fixes: 9d2b68cc10 ("net: enetc: add support for XDP_REDIRECT")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260626073244.2168214-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Cc: stable@vger.kernel.org
Fixes: e75d5ae8ab ("NTB: epf: Allow more flexibility in the memory BAR map method")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
amd_ntb_link_disable() prints "Enabling Link" which is misleading.
Update the message to reflect that the link is being disabled.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Bryam Vargas says:
====================
net/sched: finish the qdisc_dequeue_peeked conversion (taprio, multiq)
Commit 77be155cba added peek emulation: a non-work-conserving qdisc's
->peek dequeues one skb and stashes it in the child's gso_skb. A parent
that peeks such a child must then take the packet with
qdisc_dequeue_peeked(), not a direct ->dequeue(), or the stashed skb is
bypassed and the child's qlen/backlog desync. sch_red and sch_sfb were
just fixed for this; taprio and multiq still take the direct path.
With a qfq child the desync re-enters qfq_dequeue on an emptied aggregate
list and dereferences NULL, panicking from softirq on ordinary egress.
taprio reaches it on its own (root-only software path, all gates open);
multiq reaches it when a peeking parent such as tbf wraps it over a
non-work-conserving grandchild. Both need only CAP_NET_ADMIN.
Confirmed under KASAN: the unpatched arm panics, the patched arm is
clean, and a work-conserving-child control is clean. The reproducers and
splats for both are below; the per-patch changes are one line each.
taprio reproducer (self-triggering, no parent qdisc needed):
ip link add dummy0 numtxqueues 4 type dummy; ip link set dummy0 up
ip addr add 10.10.11.10/24 dev dummy0
tc qdisc add dev dummy0 root handle 1: taprio num_tc 2 \
map 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 1@1 \
base-time 9000000000000000000 sched-entry S 03 200000 flags 0x0 clockid CLOCK_TAI
tc qdisc replace dev dummy0 parent 1:1 handle 3: qfq
tc class add dev dummy0 classid 3:1 parent 3: qfq maxpkt 512 weight 1
tc filter add dev dummy0 parent 3: protocol ip prio 1 matchall classid 3:1
ping -c1 10.10.11.99 -I dummy0
[ 903.769174] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 903.769953] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 903.770456] CPU: 7 UID: 0 PID: 16162 Comm: ping Not tainted 7.1.0-rc5 #1 PREEMPT(lazy)
[ 903.771725] RIP: 0010:qfq_dequeue+0x362/0x1580 [sch_qfq]
[ 903.777452] Call Trace:
[ 903.778311] taprio_dequeue_from_txq+0x383/0x680 [sch_taprio]
[ 903.778685] taprio_dequeue_tc_priority+0x19a/0x330 [sch_taprio]
[ 903.779645] taprio_dequeue+0xa6/0x330 [sch_taprio]
[ 903.780299] __qdisc_run+0x16c/0x1890
[ 903.780854] __dev_queue_xmit+0x1ece/0x3390
[ 903.784109] ip_finish_output2+0x571/0x1da0
[ 903.785996] ip_output+0x26c/0x4d0
[ 903.789572] ping_v4_sendmsg+0xd22/0x12b0
[ 903.796118] __x64_sys_sendto+0xe0/0x1c0
[ 903.796612] do_syscall_64+0xee/0x590
[ 903.818669] Kernel panic - not syncing: Fatal exception in interrupt
multiq reproducer (needs a peeking parent over a stashing child; tbf
values chosen to force it to throttle):
ip link add dummy0 numtxqueues 2 type dummy; ip link set dummy0 up
ip addr add 10.10.11.10/24 dev dummy0
tc qdisc add dev dummy0 root handle 1: tbf rate 88bit burst 1661b \
peakrate 2257333 minburst 1024 limit 7b
tc qdisc add dev dummy0 parent 1: handle 2: multiq
for b in 1 2; do # qfq on every band
tc qdisc add dev dummy0 parent 2:$b handle 3$b: qfq
tc class add dev dummy0 classid 3$b:1 parent 3$b: qfq maxpkt 512 weight 1
tc filter add dev dummy0 parent 3$b: protocol ip prio 1 matchall classid 3$b:1
done
ping -c12 10.10.11.99 -I dummy0
[ 1066.385097] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 1066.386385] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 1066.387227] CPU: 1 UID: 0 PID: 5357 Comm: ping Not tainted 7.1.0-rc5 #1 PREEMPT(lazy)
[ 1066.389183] RIP: 0010:qfq_dequeue+0x362/0x1580 [sch_qfq]
[ 1066.396316] Call Trace:
[ 1066.396768] multiq_dequeue+0x163/0x360 [sch_multiq]
[ 1066.397885] tbf_dequeue+0x6b9/0xf17 [sch_tbf]
[ 1066.398269] __qdisc_run+0x16c/0x1890
[ 1066.399315] __dev_queue_xmit+0x1ece/0x3390
[ 1066.403276] ip_finish_output2+0x571/0x1da0
[ 1066.404818] ip_output+0x26c/0x4d0
[ 1066.408620] ping_v4_sendmsg+0xd22/0x12b0
[ 1066.415264] __x64_sys_sendto+0xe0/0x1c0
[ 1066.416251] do_syscall_64+0xee/0x590
[ 1066.441210] Kernel panic - not syncing: Fatal exception in interrupt
====================
Link: https://patch.msgid.link/20260625-b4-disp-31bcb279-v1-0-85c40b83c529@proton.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pengpeng Hou
Xi Ruoyao
Kyle Hendry
Bastian Blank
Maciej W. Rozycki
Maoyi Xie
HyeongJun An
Lee Jones
Georgiy Osokin
Manish Khadka
André Draszik
jiazhenyuan
Christoph Hellwig
Bartosz Golaszewski
Johan Hovold
Linus Torvalds
Sven Eckelmann
Lorenzo Bianconi
Linus Walleij
Xin Long
Breno Leitao
Yousef Alhouseen
Wei Fang
Ratheesh Kannoth
Xu Rao
Dmitry Torokhov
Uwe Kleine-König (The Capable Hub)
Randy Dunlap
Koichiro Den
Alok Tiwari
Jakub Kicinski