Commit 355e78913c ("f2fs: check in-memory block bitmap") added
a mirror for valid block bitmap, it expects to detect in-memory
corruption, however we never got any reports from the check points
for almost decade, let's remove the code, it can help to save
memories.
Cc: wallentx <william.allentx@gmail.com>
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS records image errors and checkpoint-stop reasons through the same
s_error_work worker. The ordinary f2fs_handle_error() path only updates
s_errors, but the worker still calls fserror_report_shutdown()
unconditionally after committing the superblock.
As a result, a metadata corruption report can be followed by a synthetic
FAN_FS_ERROR event with ESHUTDOWN and an invalid superblock file handle,
even though no stop reason was recorded.
Track whether save_stop_reason() actually changed the stop_reason array
and only report the shutdown fserror for that case. Pure s_errors updates
still commit the superblock, but no longer generate a false shutdown event.
Fixes: 50faed607d32 ("f2fs: support to report fserror")
Cc: stable@kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid.
Cc: stable@kernel.org
Fixes: 6ce19aff0b ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_write_single_node_folio() takes an io_type argument, but still
passes FS_GC_NODE_IO to __write_node_folio() unconditionally.
This was harmless while the helper was only used by
f2fs_move_node_folio(), whose caller passes FS_GC_NODE_IO. However,
commit fe9b8b30b9 ("f2fs: fix inline data not being written to disk
in writeback path") made f2fs_inline_data_fiemap() call the helper with
FS_NODE_IO for FIEMAP_FLAG_SYNC.
Honor the caller supplied io_type so inline-data FIEMAP sync writeback is
accounted as normal node IO instead of GC node IO, while the GC path
continues to pass FS_GC_NODE_IO explicitly.
Cc: stable@kernel.org
Fixes: fe9b8b30b9 ("f2fs: fix inline data not being written to disk in writeback path")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_read_data_large_folio() can keep a read bio across multiple
readahead folios. If a later folio hits an error before any of its
blocks are added to the bio, folio_in_bio is false and the current error
path returns immediately after ending that folio.
This can leave the bio accumulated for earlier folios unsubmitted. Those
folios then never receive read completion, and readers can wait
indefinitely on the locked folios.
Route errors through the common out path so any pending bio is submitted
before returning. Stop consuming more readahead folios once an error is
seen, and only wait on and clear the current folio when it was actually
added to the bio.
Cc: stable@kernel.org
Fixes: a5d8b9d94e ("f2fs: fix to unlock folio in f2fs_read_data_large_folio()")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue.
Cc: stable@kernel.org
Cc: Daeho Jeong <daehojeong@google.com>
Cc: Sunmin Jeong <s_min.jeong@samsung.com>
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Fixes: f18d007693 ("f2fs: use meta inode for GC of COW file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);
Cc: stable@kernel.org
Fixes: 351df4b201 ("f2fs: add segment operations")
Cc: Ruipeng Qi <ruipengqi3@gmail.com>
Reported: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chao Yu <chaseyu@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to troubleshoot in which step we may block on during
mount w/ checkpoint_disable mount option.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS did not collect iostat latency for direct IO reads and writes,
hook iomap_dio_ops.submit_io to bind an iostat context and record the
submission timestamp. Replace bi_end_io with f2fs_dio_end_bio() to
collect IO latency on completion before calling back to the original
iomap_dio_bio_end_io(), to add iostat latency tracking support for
F2FS DIO.
Signed-off-by: shengyong1 <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In large section mode, do_garbage_collect() previously determined the
section's representative type by looking only at the first segment of
the section. However, if data was fsynced into an area previously used
as a node section, and this area is recovered during roll-forward
recovery after sudden power off (SPO), GC would incorrectly assume the
section's type based on an empty or obsolete first segment. This caused
the recovered data segment to be misunderstood as being stuck inside a
node section, triggering false inconsistency panics (Inconsistent
segment type in SSA and SIT) and subsequent mount failures.
This patch optimizes do_garbage_collect() to determine the section's
representative type by identifying the first segment that actually
contains valid blocks (valid_blocks > 0) during the main GC loop. This
eliminates false alarms from empty/obsolete leading segments while
maintaining strict section-level type consistency checks for genuine
corruption.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add trace_f2fs_fault_report to trigger reporting upon f2fs_bug_on,
need_fsck, stop_checkpoint, and handle_eio. Since f2fs_bug_on and
need_fsck can be triggered in hundreds of scenarios, define set_sbi_flag
as a macro to help capture the effective fault function and line number.
Signed-off-by: shengyong1 <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nat_cnt[] is updated while callers hold nat_tree_lock, but F2FS samples
the counters locklessly in f2fs_available_free_memory(),
excess_dirty_nats(), and excess_cached_nats(). Those helpers only steer
cache reclaim and background sync heuristics; they do not control NAT
entry lifetime or checkpoint correctness.
Document the intent with data_race(READ_ONCE()) and a short comment
instead of adding locking to the balance path.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs stores mount-wide activity timestamps in sbi->last_time[] and
samples them from background discard, GC, and balance paths without a
dedicated lock. The timestamps are used as best-effort heuristics to
decide whether background work should run now or sleep a bit longer.
The current helpers use plain loads and stores, so KCSAN can report races
between frequent foreground updates and background readers. Exact
freshness is not required here, but the intentional lockless accesses
should be marked explicitly.
Use WRITE_ONCE() in f2fs_update_time() and READ_ONCE() in
f2fs_time_over() and f2fs_time_to_wait(). This preserves the existing
heuristic behavior and avoids adding locking to hot paths.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
staging: most: video: avoid double free on video register failure
staging: sm750: rename CamelCase variable Bpp to bpp
staging: rtl8723bs: delete superfluous switch statement
staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
staging: rtl8723bs: propagate errno through hal xmit path
staging: rtl8723bs: propagate errno through xmit enqueue path
staging: rtl8723bs: convert rtw_xmit_classifier to return errno
staging: rtl8723bs: make rtw_xmit_classifier static
staging: rtl8723bs: simplify rtw_xmit_classifier control flow
staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
staging: rtl8723bs: make _rtw_enqueue_cmd static
staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
staging: rtl8723bs: fix multiple blank lines in more hal/ files
staging: rtl8723bs: remove unused TXDESC_64_BYTES code
staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
staging: rtl8723bs: fix multiple blank lines in hal/ files
staging: rtl8723bs: rtw_mlme: add blank line for readability
staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
...
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Change mk_users (the set of user claims to an fscrypt master key) from a
'struct key' keyring to a simple linked list.
It's still a collection of 'struct key' for quota tracking. It was
originally thought to be natural that a collection of 'struct key'
should be held in a 'struct key' keyring. In reality, it's just been
causing problems, similar to how using 'struct key' for the filesystem
keyring caused problems and was removed in commit d7e7b9af10
("fscrypt: stop using keyrings subsystem for fscrypt_master_key").
Commit d3a7bd4200 ("fscrypt: clear keyring before calling key_put()")
fixed mk_users cleanup to be synchronous. But that apparently wasn't
enough: the keyring subsystem's redundant locking is still generating
lockdep false positives due to the interaction with filesystem reclaim.
With the simple list, the redundant locking and lockdep issue goes away.
Of course, searching a linked list is linear-time whereas the
'struct key' keyring used a fancy constant-time associative array. But
that's fine here, since in practice there's just one entry in the list.
In fact the new code is much faster in practice, since it's much smaller
and doesn't have to convert the kuid_t into a string to search for it.
Reported-by: syzbot+f55b043dacf43776b50c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f55b043dacf43776b50c
Reported-by: Mohammed EL Kadiri <med08elkadiri@gmail.com>
Closes: https://lore.kernel.org/keyrings/20260614150041.21172-1-med08elkadiri@gmail.com/
Fixes: 23c688b540 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618221921.87896-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The addition of support for customizable data unit sizes introduced an
edge case where a file's contents can be en/decrypted with the wrong
data unit size. It occurs when there are multiple v2 policies that:
- Have *different* data unit sizes, via the log2_data_unit_size field
- Share the same master_key_identifier, contents_encryption_mode, and
either FSCRYPT_POLICY_FLAG_DIRECT_KEY,
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32, or
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64
- Are being used on the same filesystem, which also must be mounted with
the "inlinecrypt" mount option.
Fortunately this edge case doesn't actually occur in practice. I just
found it via code review. But it needs to be fixed regardless.
The bug is caused by the data unit size not being fully considered when
blk_crypto_keys are cached in mk_direct_keys, mk_iv_ino_lblk_32_keys,
and mk_iv_ino_lblk_64_keys. They're differentiated only by master key,
encryption mode, and flag. However, each one actually has a data unit
size too. Only the first data unit size that is cached is used.
To fix this, start using the data unit size to differentiate the cached
keys. For several reasons, including avoiding increasing the size of
struct fscrypt_master_key, just replace all three arrays with a single
linked list instead of changing them into two-dimensional arrays. This
works well when considering that in practice at most 2 entries are used
across all three arrays, so it was already mostly wasted space.
For simplicity, make the list also take over the publish/subscribe of
the prepared key itself. That is, create separate list nodes for
blk_crypto_keys vs crypto_skciphers, and add nodes to the list only when
their key is actually prepared. (Note that the legacy
fscrypt_direct_keys table in fs/crypto/keysetup_v1.c already works this
way.) This eliminates the need for the additional memory barriers when
reading and writing the fields of struct fscrypt_prepared_key.
Note that I technically should have included the data unit size in the
HKDF info string as well. But it's too late to change that.
Fixes: 5b11888471 ("fscrypt: support crypto data unit size less than filesystem block size")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618180652.52742-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
Pull SPDX updates from Greg KH:
"Here is a "big" set of SPDX-like patches for 7.2-rc1. It is the
addition of the ability for the kernel build process to generate a
Software Bill of Materials (SBOM) in the SPDX format, that matches up
exactly with just the files that are actually built for the specific
kernel image generated.
To generate a sbom, after the kernel has been built, just do:
make sbom
and marvel at the JSON file that is generated...
This is needed by users for environments in which a SBOM is required
(medical, automotive, anything shipped in the EU, etc.) and cuts down
by a massive size the "naive" SBOM solution that many vendors have
done by just including _all_ of the kernel files in the resulting
document.
This result is still a giant JSON file, that I am told parses
properly, so we just have to trust that it is properly inclusive as
attempting to parse that thing by hand is impossible.
The scripts here are self-contained python scripts, no additional
libraries or tools to create the SBOM are needed, which is important
for many build systems. Overall it's just a bit over 4000 lines of
"simple" python code, the most complex part is the regex matching
lines, but those are nothing compared to what we maintain in
scripts/checkpatch.pl today...
The various parts where the tool touches the kbuild subsystem have
been acked by the kbuild maintainer, so all should be good here.
All of these patches have been in linux-next for weeks with no
reported problems"
* tag 'spdx-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/sbom: add unit tests for SPDX-License-Identifier parsing
scripts/sbom: add unit tests for command parsers
scripts/sbom: add SPDX build graph
scripts/sbom: add SPDX source graph
scripts/sbom: add SPDX output graph
scripts/sbom: collect file metadata
scripts/sbom: add shared SPDX elements
scripts/sbom: add JSON-LD serialization
scripts/sbom: add SPDX classes
scripts/sbom: add additional dependency sources for cmd graph
scripts/sbom: add cmd graph generation
scripts/sbom: add command parsers
scripts/sbom: setup sbom logging
scripts/sbom: integrate script in make process
scripts/sbom: add documentation
Fix:
util/btf.c: In function '__btf_type__find_member_by_name':
util/btf.c:19:43: error: comparison of integer expressions of different signedness: 'int' and '__u32' {aka 'unsigned int'} [-Werror=sign-compare]
19 | for (i = 0, m = btf_members(t); i < btf_vlen(t); i++, m++) {
| ^
builtin-trace.c: In function 'syscall_arg__strtoul_btf_enum':
builtin-trace.c:967:27: error: comparison of integer expressions of different signedness: 'int' and '__u32' {aka 'unsigned int'} [-Werror=sign-compare]
967 | for (int i = 0; i < btf_vlen(bt); ++i, ++be) {
| ^
by making the variable the same type as the function.
Committer note:
Add an extra hunk from Alan Maguire, fixing btf_enum_scnprintf().
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. This batches
fixes for real crashes with trivial/correctness fixes. There is too
a rework of the conntrack expectation timeout strategy to deal with
a possible race when removing an expectation.
1) Fix the incorrect flowtable timeout extension for entries in
hw offload, from Adrian Bente. This is correcting a defect in
the functionality, no crash.
2) Hold reference to device under the fake dst in br_netfilter,
from Haoze Xie. This is fixing a possible UaF if the device
is removed while packet is sitting in nfqueue.
3) Reject template conntrack in xt_cluster, otherwise access to
uninitialize conntrack fields are possible leading to WARN_ON
due to unset layer 3 protocol. From Wyatt Feng.
4) Make sure the IPv6 tunnel header is in the linear skb data
area before pulling. While at it remove incomplete NEXTHDR_DEST
support. From Lorenzo Bianconi. This possibly leading to crash
if IPv4 header is not in the linear area.
5) Use test_bit_acquire in ipset hash set to avoid reordering
of subsequent memory access. This is addressing a LLM related
report, no crash has been observed. From Jozsef Kadlecsik.
6) Use test_bit_acquire in ipset bitmap set too, for the same
reason as in the previous patch, from Jozsef Kadlecsik.
7) Call kfree_rcu() after rcu_assign_pointer() to address a
possible UaF if kfree_rcu() runs inmediately, which to my
understanding never happens. Never observed in practise,
reported by LLM. Also from Jozsef Kadlecsik.
8) Use disable_delayed_work_sync() instead cancel_delayed_work_sync()
to avoid that ipset GC handler re-queues work as reported by LLM.
From Jozsef Kadlecsik. This is for correctness.
9) Restore the check in nft_payload for exceeding payloda offset
over 2^16. From Florian Westphal. This fixes a silent truncation,
not a big deal, but better be assertive and reject it.
10) Validate NFT_META_BRI_IIFHWADDR can only run from bridge
prerouting. From Florian Westphal. Harmless but it could allow
to read bytes from skb->cb.
11) Zero out destination hardware address during the flowtable
path setup, also from Florian. This is a correctness fix, LLM
points that possible infoleak can happen but topology to achieve
it is not clear.
12) Skip IPv4 options if present when building the IPV4 reject reply.
Otherwise bytes in the IPv4 options header can be sent back to
origin where the ICMP header is being expected. Again from
Florian Westphal.
13) Replace timer API for expectation by GC worker approach. This
is implicitly fixing a race between nf_ct_remove_expectations()
which might fail to remove the expectation due to timer_del()
returning false because timer has expired and callback is
being run concurrently. This fix is addressing a crash that has
been already reported with a reproducer.
14) Check if br_vlan_get_pvid_rcu() fails, otherwise possible stack
infoleak of 4-bytes. From Florian Westphal.
* tag 'nf-26-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
netfilter: nf_reject: skip iphdr options when looking for icmp header
netfilter: nft_flow_offload: zero device address for non-ether case
netfilter: nft_meta_bridge: add validate callback for get operations
netfilter: nft_payload: reject offsets exceeding 65535 bytes
netfilter: ipset: make sure gc is properly stopped
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
netfilter: ipset: Don't use test_bit() in lockless RCU readers in bitmap types
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
netfilter: xt_cluster: reject template conntracks in hash match
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
netfilter: flowtable: fix offloaded ct timeout never being extended
====================
Link: https://patch.msgid.link/20260620222738.112506-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe and sets up chained
handlers using irq_set_chained_handler_and_data(). However, on driver
removal, the generic chips are not freed and the chained handlers are
not removed.
The generic chips remain on the global gc_list and may later be accessed by
generic interrupt chip suspend, resume, or shutdown callbacks after the
driver has been removed, potentially resulting in a use-after-free and
kernel crash.
The chained handlers that were installed in probe for peripheral and
syswake interrupts are also left dangling, which can lead to spurious
interrupts accessing freed memory.
Fix these issues by:
- Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the
core code automatically removes generic chips when irq_domain_remove()
is called
- Clearing all chained handlers with NULL in pdc_intc_remove()
Fixes: b6ef9161e4 ("irq-imgpdc: add ImgTec PDC irqchip driver")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260618021352.661773-1-fffsqian@163.com
The sched_ext sources had grown to ten ext* files directly under
kernel/sched/. Move them into a new kernel/sched/ext/ subdirectory and drop
the now-redundant ext_ prefix. ext.c/h keep their names.
kernel/sched/ext.{c,h} -> kernel/sched/ext/ext.{c,h}
kernel/sched/ext_internal.h -> kernel/sched/ext/internal.h
kernel/sched/ext_types.h -> kernel/sched/ext/types.h
kernel/sched/ext_idle.{c,h} -> kernel/sched/ext/idle.{c,h}
kernel/sched/ext_cid.{c,h} -> kernel/sched/ext/cid.{c,h}
kernel/sched/ext_arena.{c,h} -> kernel/sched/ext/arena.{c,h}
The include paths in build_policy.c and sched.h, the MAINTAINERS glob, and a
few documentation and comment references are updated to match. No code or
symbol changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull more slab updates from Vlastimil Babka:
- Introduce and wire up a new alloc_flags parameter for modifying
slab-specific behavior without adding or reusing gfp flags. Also
introduce slab_alloc_context to keep function parameter bloat in
check. Both are similar to what the page allocator does.
kmalloc_flags() exposes alloc_flags for mm-internal users.
- SLAB_ALLOC_NOLOCK flag is used to implement kmalloc_nolock()
behavior without relying on lack of __GFP_RECLAIM, which caused
false positives with workarounds like fd3634312a ("debugobject:
Make it work with deferred page initialization - again").
- SLAB_ALLOC_NO_RECURSE replaces __GFP_NO_OBJ_EXT, which could have
been removed, but pending memory allocation profiling changes in
mm tree have grown a new user - there is however a work ongoing
to replace that too, so __GFP_NO_OBJ_EXT should eventually be
removed. (Vlastimil Babka)
- Add kmem_buckets_alloc_track_caller() with a user to be added in the
net tree (Pedro Falcato)
- Fixes for kernel-doc and slabinfo (Randy Dunlap, Yichong Chen)
* tag 'slab-for-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/mm/slabinfo: fix total_objects attribute name
slab: recognize @GFP parameter as optional in kernel-doc
mm/slab: add a node-track-caller variant for kmem buckets allocation
mm/slab: replace __GFP_NO_OBJ_EXT with SLAB_ALLOC_NO_RECURSE for sheaves
mm/slab: remove __GFP_NO_OBJ_EXT usage from alloc_slab_obj_exts()
mm/slab: introduce kmalloc_flags()
mm/slab: allow __GFP_NOMEMALLOC and __GFP_NOWARN for kmalloc_nolock()
mm/slab: pass slab_alloc_context to __do_kmalloc_node()
mm/slab: allow kmem_cache_alloc_bulk() with any gfp flags
mm/slab: replace slab_alloc_node() parameters with slab_alloc_context
mm/slab: pass alloc_flags through slab_post_alloc_hook() chain
mm/slab: pass alloc_flags to new slab allocation
mm/slab: add alloc_flags to slab_alloc_context
mm/slab: replace struct partial_context with slab_alloc_context
mm/slab: introduce alloc_flags and SLAB_ALLOC_NOLOCK
mm/slab: introduce slab_alloc_context
mm/slab: stop inlining __slab_alloc_node()
mm/slab: do not init any kfence objects on allocation
Pull hyperv updates from Wei Liu:
- Use wakeup mailbox to boot APs in Hyper-V VTL2 TDX guests (Yunhong
Jiang, Ricardo Neri)
- Move the Hyper-V IOMMU to its own subdirectory (Mukesh Rathor)
- Cosmetic changes to mshv and balloon driver (Junrui Luo, Markus
Elfring)
* tag 'hyperv-next-signed-20260621' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: add bounds check on vp_index in mshv_intercept_isr()
hv_balloon: Simplify data output in hv_balloon_debug_show()
x86/hyperv: Cosmetic changes in irqdomain.c for readability
iommu/hyperv: Create hyperv subdirectory under drivers/iommu
x86/hyperv/vtl: Use the wakeup mailbox to boot secondary CPUs
x86/hyperv/vtl: Mark the wakeup mailbox page as private
x86/acpi: Add a helper to get the address of the wakeup mailbox
x86/hyperv/vtl: Setup the 64-bit trampoline for TDX guests
x86/realmode: Make the location of the trampoline configurable
x86/hyperv/vtl: Set real_mode_header in hv_vtl_init_platform()
x86/dt: Parse the Wakeup Mailbox for Intel processors
dt-bindings: reserved-memory: Wakeup Mailbox for Intel processors
x86/acpi: Add functions to setup and access the wakeup mailbox
x86/topology: Add missing struct declaration and attribute dependency
Pull more s390 updates from Alexander Gordeev:
- consolidate s390 idle time accounting by moving all CPU time tracking
to the architecture backend and eliminate the mix of architecture-
specific and common code accounting
- Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and
kcpustat_field_iowait() functions
- Finalize ptep_get() conversion by replacing direct page table entry
dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.)
- Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and
pkey_pckmo implementations and fail if the length is exceeded
* tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey: Check length in pkey_pckmo handler implementation
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
s390/idle: Add missing EXPORT_SYMBOL_GPL()
s390/mm: Complete ptep_get() conversion
s390/idle: Remove idle time and count sysfs files
s390/idle: Provide arch specific kcpustat_field_idle()/kcpustat_field_iowait()
s390/irq/idle: Use stcke instead of stckf for time stamps
s390/timex: Move union tod_clock type to separate header
syzbot reported a puzzling splat:
WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20
stub_timer() is installed as timer callback function in
hrtimer_fixup_assert_init(), which is invoked when
debug_object_assert_init() can't find a shadow object. In that case debug
objects emits a warning about it before invoking the fixup.
Though the provided console log lacks this warning and instead has the
following a few seconds before the splat:
ODEBUG: Out of memory. ODEBUG disabled
So the object was looked up in debug_object_assert_init() and the lookup
failed due a concurrent out of memory situation which disabled debug
objects and freed the shadow objects:
debug_object_assert_init()
if (!debug_objects_enabled)
return; obj = alloc();
if (!obj) {
// Out of memory
debug_objects_enabled = false;
free_objects();
obj = lookup_or_alloc();
// The lookup failed because the other side
// removed the objects, so this returns
// an error code as the object in question
// is not statically initialized
if (!IS_ERR_OR_NULL(obj))
return;
if (!obj) {
debug_oom();
return;
}
print(...)
if (!debug_objects_enabled)
return;
fixup(...)
The debug object splat is skipped because debug_objects_enabled is false,
but the fixup callback is invoked unconditionally, which makes the timer
disfunctional.
This is only a problem in debug_object_assert_init() and
debug_object_activate() as both have to handle statically initialized
objects and therefore must handle the error pointer return case
gracefully. All other places only handle the found/not found case and the
NULL pointer return is a signal for OOM. Otherwise they get a valid shadow
object.
Plug the hole by checking whether debug objects are still enabled before
invoking the print and fixup function in those two places.
Fixes: b84d435cc2 ("debugobjects: Extend to assert that an object is initialized")
Reported-by: syzbot+5e8dda76ca21dae314b6@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/874iiwlzlb.ffs@fw13
The compat version of settimeofday() uses '>' instead of '>=' when
validating tv_usec against USEC_PER_SEC, allowing the value 1000000 to pass
the check. After the subsequent conversion to nanoseconds (tv_nsec *=
NSEC_PER_USEC), this results in tv_nsec == NSEC_PER_SEC, which violates the
timespec invariant that tv_nsec must be strictly less than NSEC_PER_SEC.
The native settimeofday() was already fixed in commit ce4abda5e1 ("time:
Fix off-by-one in settimeofday() usec validation"), but the compat
counterpart was missed.
Fix it by using '>=' to reject tv_usec values outside the valid range [0,
USEC_PER_SEC - 1].
Fixes: 5e0fb1b57b ("y2038: time: avoid timespec usage in settimeofday()")
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260622103348.120255-1-wangyan01@kylinos.cn
__pkvm_memshare_page_req() constructs a fake DABT ESR_EL2 to exit to
the host without setting IL. The ESR has ISV=0, so IL must be 1 per the
architecture. The host does not read IL on this path, but the
constructed syndrome should still be architecturally valid.
Set ESR_ELx_IL.
Fixes: 03313efed5 ("KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260618121643.4105064-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The FPAC syndrome constructed during nested ERET emulation does not set
IL. For FPAC (EC=0x1C), IL reflects the instruction length. ERET and
its authenticated variants are always A64 32-bit instructions, so IL
must be 1.
Fixes: 213b3d1ea1 ("KVM: arm64: nv: Handle ERETA[AB] instructions")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260618121643.4105064-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
inject_abt64() derives IL from the triggering trap's instruction length
(kvm_vcpu_trap_il_is32bit()), but the IL of the injected abort is fixed
by its EC, not by the triggering instruction. The architecture mandates
IL=1 for Instruction Aborts unconditionally and for Data Aborts with
ISV=0, and this function never sets ISV (the FSC is always EXTABT or
SEA_TTW). For a 16-bit T32 trap (a 32-bit EL0 task under an AArch64 EL1
guest) the trap has IL=0, so the abort is injected with the wrong IL.
Set ESR_ELx_IL unconditionally.
Fixes: aa8eff9bfb ("arm64: KVM: fault injection into a guest")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260618121643.4105064-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
inject_undef64() derives IL from the triggering trap's instruction
length (kvm_vcpu_trap_il_is32bit()), but the IL of the injected
exception is fixed by its EC, not by the triggering instruction. The
architecture mandates IL=1 for EC=0 (Unknown) unconditionally, so the
conditional is wrong. The undef-injection paths are not reached from
16-bit instructions, so there is no functional change today, but the
logic should not rely on that.
Set ESR_ELx_IL unconditionally.
Fixes: aa8eff9bfb ("arm64: KVM: fault injection into a guest")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260618121643.4105064-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
inject_undef64() constructs an ESR with EC=0 (Unknown) but does not set
IL. The architecture mandates IL=1 for EC=0 unconditionally (ARM DDI
0487, ESR_ELx.IL description), so the injected syndrome is one that
conforming hardware cannot produce.
Set ESR_ELx_IL in the constructed syndrome.
Fixes: e5d40a5a97 ("KVM: arm64: pkvm: Add a generic synchronous exception injection primitive")
Reported-by: sashiko <sashiko@sashiko.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260618121643.4105064-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When constructing an L1 VNCR mapping, KVM unconditionally uses cacheable
memory attributes, even if the underlying PFN isn't memory. This gets
particularly hairy if the endpoint doesn't support cacheable memory
attributes, potentially throwing an SError on writeback...
While KVM does permit cacheable memory attributes on certain PFNMAP
VMAs, kvm_translate_vncr() isn't currently grabbing the VMA. So do the
simpler thing for now and just reject everything that isn't memory.
Cc: stable@vger.kernel.org
Fixes: 2a359e0725 ("KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260618234207.1063941-5-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts
for a write, similar to how a regular stage-2 mapping is handled. It is
entirely possible that the guest reads from the VNCR before writing to
it, in which case the PFN could only be read-only.
Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR
abort, allowing the host mapping to be faulted in for write the second
time around. Interestingly enough, this also satisfies the ordering
requirements of FEAT_ETS2/3 between descriptor updates and MMU faults.
Cc: stable@vger.kernel.org
Fixes: 2a359e0725 ("KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260618234207.1063941-4-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort
when kvm_translate_vncr() returns -EFAULT. This is not always the case
as it's possible to encounter 'late' failures on the output of S1
translation, e.g. a GFN outside of the memslots.
Fix it by preparing an external abort before returning from
kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection
path while at it.
Cc: stable@vger.kernel.org
Fixes: 2a359e0725 ("KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260618234207.1063941-3-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM currently maps the L1 VNCR into the host stage-1 by relying entirely
on the permissions of the guest stage-1. At the same time, it is
entirely possible that the backing PFN is read-only (e.g. RO memslot),
meaning that the L1 VNCR should use at most a read-only mapping.
Cache the writability of the PFN in the VNCR TLB and use it to constrain
the resulting fixmap permissions. Promote VNCR permission faults to an
SEA in the case where the guest attempts to write to a read-only
endpoint. Conveniently, this also plugs a page leak found by Sashiko [*]
resulting from the early return for a read-only PFN.
Cc: stable@vger.kernel.org
Fixes: 2a359e0725 ("KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2")
Link: https://lore.kernel.org/kvm/20260608082603.16AEC1F00893@smtp.kernel.org/
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260618234207.1063941-2-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Change the return type of drm_sysfb_get_visible_size() to s64 so
that it returns a possible errno code from _get_validated_size0().
Fix callers to handle the errno code.
The currently returned unsigned type converts an errno code to a
very large size value, which drivers interpret as visible size of
the system framebuffer. Later efforts to reserve the framebuffer
resource fail.
The bug has been present since efidrm and vesadrm got merged. It
was then part of each driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 32ae90c66f ("drm/sysfb: Add efidrm for EFI displays")
Fixes: a84eb6abe2 ("drm/sysfb: Add vesadrm for VESA displays")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.16+
Link: https://patch.msgid.link/20260618084327.46567-4-tzimmermann@suse.de
Chao Yu
Wenjie Qi
Wenjie Qi
liujinbao1
Daeho Jeong
Cen Zhang
Linus Torvalds
Eric Biggers
Mark Brown
Jakub Kicinski
Ahmad Fatoum
Qingshuang Fu
Tejun Heo
Thomas Gleixner
Jens Wiklander
Wang Yan
Aaron Erhardt
Zhan Xusheng
Bradley Morgan
Fuad Tabba
Oliver Upton
Thomas Zimmermann