The Yoga 7 16IAP7 (board LNVNB161216, codec SSID 17aa:386a) has pin
complex 0x17 (bass speakers) wrongly reported as unconnected, causing
only one of four speaker pins (0x14) to be configured and resulting in
mono/tinny audio.
SOF corrupts the PCI subsystem ID to 17aa:0000, preventing SND_PCI_QUIRK
from matching. HDA_CODEC_QUIRK is used instead, which matches against
codec->core.subsystem_id read directly from the HDA codec register and
unaffected by the SOF bug.
Applies ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN, the same fixup used for
the Yoga 7 14IAL7, which corrects pin 0x17's default configuration and
enables both speaker pairs.
Signed-off-by: Chris Aherin <chrisaherin@gmail.com>
Link: https://patch.msgid.link/20260622001210.20553-1-chrisaherin@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.
Reject blocks shorter than the spec's 22-byte tiled payload before
reading the fixed struct, as drm_parse_vesa_mso_data() already does.
BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update
Read of size 2 at addr ffff888010077700 by task exploit/147
dump_stack_lvl (lib/dump_stack.c:94 ...)
print_report (mm/kasan/report.c:378 ...)
kasan_report (mm/kasan/report.c:595)
drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581)
bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574)
drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426)
status_store (drivers/gpu/drm/drm_sysfs.c:219)
...
vfs_write (fs/read_write.c:595 fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
Fixes: 40d9b043a8 ("drm/connector: store tile information from displayid (v3)")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260615184737.899892-1-xmei5@asu.edu
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The pwrseq core takes three locks in consistent order everywhere:
pwrseq_sem -> pwrseq->rw_lock -> pwrseq->state_lock
pwrseq_get() -> pwrseq_match_device() takes pwrseq_sem for reading, then
rw_lock for reading. pwrseq_power_on()/pwrseq_power_off() take rw_lock
for reading and then state_lock.
pwrseq_device_unregister() is the only exception, it takes: state_lock,
then rw_lock for writing and finally pwrseq_sem for writing. This created
two potential ABBA deadlock situations that sashiko pointed out.
- pwrseq_power_on/off() take rw_lock for reading then state_lock, while
pwrseq_unregister() takes state_lock then rw_lock for writing
- pwrseq_get() takes pwrseq_sem for reading then rw_lock for reading,
while pwrseq_unregister() takes rw_lock for writing then pwrseq_sem
for writing
Reorder the unregister path to taking pwrseq_sem for writing -> rw_lock
for writing and drop the state_lock entirely. This is safe as
enable_count is only ever written under rw_lock held for read (via
pwrseq_unit_enable()/disable(), reached only from pwrseq_power_on/off()),
so holding rw_lock for writing already excludes every other writer and
reader and the active-users WARN() stays race-free without state_lock.
Fixes: 249ebf3f65 ("power: sequencing: implement the pwrseq core")
Closes: https://sashiko.dev/#/patchset/20260616151049.1705503-1-vulab%40iscas.ac.cn
Link: https://patch.msgid.link/20260618-pwrseq-abba-deadlock-v1-1-943a3fd81c06@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
pwrseq_debugfs_seq_next() declares 'next' with __free(put_device),
which causes put_device() to be called on the returned pointer when
the variable goes out of scope. This results in a use-after-free
since the seq_file framework receives a pointer whose reference has
already been dropped.
Simply removing __free(put_device) would fix the UAF but would leak
the reference acquired by bus_find_next_device(), as stop() only
calls up_read(&pwrseq_sem) and never releases the device reference.
Fix this by making the reference counting consistent across all
seq_file callbacks, matching the standard pattern used by PCI and
SCSI:
- start(): use get_device() so it returns a referenced pointer.
- next(): explicitly put_device(curr) to release the previous
device's reference (no NULL check needed - the seq_file framework
only calls next() while the previous return was non-NULL).
- stop(): put_device(data) to release the last iterated device's
reference, with a NULL guard since stop() may be called with NULL
when start() returned NULL or next() reached end-of-sequence.
Cc: stable@vger.kernel.org
Fixes: 249ebf3f65 ("power: sequencing: implement the pwrseq core")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260616151049.1705503-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
My Grace host started to show this warning:
WARNING: drivers/soc/tegra/fuse/tegra-apbmisc.c:120 at tegra_read_straps
tegra30_fuse_add_randomness
tegra30_fuse_init
tegra_fuse_probe
tegra_read_straps() warns when the static "chipid" cache is still zero,
using it as a proxy for "APBMISC has been initialised". However chipid
is only ever populated lazily by tegra_read_chipid() when it reads the
APBMISC register.
Guard on apbmisc_base instead, which is set unconditionally in
tegra_init_apbmisc_resources() for all platforms and is already the
sentinel used by tegra_read_chipid().
Fixes: 8b8ee2e56f ("soc/tegra: Use ARM SMCCC to get chip ID, revision, and platform info")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When build testing on ARM without the PMC driver, the other drivers
fail to link:
ld.lld: error: undefined symbol: tegra_pmc_core_domain_state_synced
>>> referenced by regulators-tegra30.c
>>> drivers/soc/tegra/regulators-tegra30.o:(tegra30_regulator_balance_voltage) in archive vmlinux.a
>>> referenced by regulators-tegra20.c
>>> drivers/soc/tegra/regulators-tegra20.o:(tegra20_core_rtc_update) in archive vmlinux.a
Adapt the checks in the header to cover both cases on other architectures
and without PMC.
Fixes: 8318af5dd2 ("soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The resource freed at the 'put_aux' label is "sor->aux->dev".
However, this resource is taken after devm_tegra_pmc_get(), so there is no
point to release it in this error handling path.
This is harmless because put_device() will be called with a NULL pointer,
but this is confusing.
So, fix the logic and return directly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
EROFS over fscache was introduced to provide image lazy pulling
functionality. After the feature landed, the fscache subsystem made
netfs a new hard dependency, which is unexpected for a local filesystem
and has an kernel-defined caching hierarchy which could be inflexible
compared to the fanotify pre-content hooks. Therefore, this feature has
been deprecated for almost two years.
As EROFS file-backed mounts and fanotify pre-content hooks both upstream
for a while and already providing equivalent functionality (erofs-utils
has supported fanotify pre-content hooks), let's remove the fscache
backend now.
The main application of this feature is Nydus [1], and they plan to move
to use fanotify pre-content hooks in the near future too.
I hope this patch can be merged into Linux 7.2, which is also motivated
by newly found implementation issues [2][3] that are not worth
investigating given the deprecation and limited development resources.
The associated fscache/cachefiles cleanup patch will follow separately
through the vfs tree (netfs) later: it seems fine since the codebase is
isolated by CONFIG_CACHEFILES_ONDEMAND.
[1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md
[2] https://github.com/dragonflyoss/nydus/pull/1824
[3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com
Acked-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Amery Hung says:
====================
Fix effective prog array indexing with BPF_F_PREORDER
This patchset fixes a cgroup effective-array indexing bug where
replace_effective_prog() and purge_effective_progs() used a linear hlist
position that doesn't match the array layout when BPF_F_PREORDER
programs are present, corrupting the array on link update and risking a
use-after-free in the detach fallback. It computes the slot via a shared
effective_prog_pos() helper and adds a cgroup_preorder selftest.
Changelog
v1 -> v2:
- Also fix purge_effective_progs(), in addition to
replace_effective_prog() (Sashiko).
- selftest: Set err on bpf_link_create() failure so the failure is
reported to the caller (Sashiko).
====================
Link: https://patch.msgid.link/20260619063520.2690547-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a cgroup_preorder case that attaches a normal and a BPF_F_PREORDER
program to a cgroup (effective order [2, 1]), then replaces the normal
link's program via bpf_link_update() and checks the effective order
becomes [2, 3] — i.e. only the non-preorder slot changes. Without the
replace_effective_prog() fix the array is corrupted and the order is
wrong.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260619063520.2690547-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
replace_effective_prog() and purge_effective_progs() located the slot in
the effective array by walking the program hlist and counting entries
linearly. That count does not match the array layout: compute_effective_
progs() places BPF_F_PREORDER programs at the front (ancestor cgroup
first, attach order within a cgroup) and the rest after them (descendant
cgroup first). So when a preorder program is present, the linear hlist
position no longer equals the program's index in the effective array.
For replace_effective_prog() (bpf_link_update()) this overwrote the
wrong slot, corrupting the effective order. For purge_effective_progs(),
it could dummy out a slot belonging to a different program and leave the
detached program in the array while bpf_prog_put() drops its reference,
i.e. a use-after-free.
Fix both by replaying compute_effective_progs()'s placement (including
the per-cgroup preorder reversal) in a shared effective_prog_pos()
helper. Identify the entry by its struct bpf_prog_list pointer rather
than by (prog, link) value, so the lookup resolves to exactly the
attachment the syscall selected even when the same bpf_prog is attached
to several cgroups in the hierarchy.
Fixes: 4b82b181a2 ("bpf: Allow pre-ordering for bpf cgroup progs")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260619063520.2690547-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_ipv4_fib_lookup() and bpf_ipv6_fib_lookup() build the flow key on
the stack with a bare "struct flowi4 fl4;" / "struct flowi6 fl6;" and
fill it field by field, but never set flowi4_l3mdev / flowi6_l3mdev.
On the non-DIRECT path the lookup goes through the fib rules whenever the
netns has custom rules, which a VRF installs:
bpf_ipv4_fib_lookup() -> fib_lookup() -> __fib_lookup()
-> l3mdev_update_flow() reads !fl->flowi_l3mdev
-> fib_rules_lookup() -> fib_rule_match()
-> l3mdev_fib_rule_match() uses fl->flowi_l3mdev
l3mdev_update_flow() resolves the l3mdev master from the ingress device
only while the field is still zero. Left at a nonzero stack value the
resolution is skipped, and l3mdev_fib_rule_match() then tests that value
as an ifindex, so the VRF master is not resolved and the rule fails to
match: an ingress enslaved to a VRF can fail to select its table. FIB
rules matching on an L3 master device (l3mdev_fib_rule_iif_match()/
_oif_match()) read the same value, so an "ip rule iif/oif <vrf>"
mismatches the same way.
Zero-initialize the whole flow struct rather than adding one more
field assignment, so any flowi field added later is covered too.
ip_route_input_slow() likewise zeroes the field before its input lookup.
CONFIG_INIT_STACK_ALL_ZERO masks this by default, but it depends on
compiler support (CC_HAS_AUTO_VAR_INIT_ZERO), so INIT_STACK_NONE builds,
including older toolchains that fall back to it, are exposed. Built with
INIT_STACK_ALL_PATTERN, a plain bpf_fib_lookup (no VLAN, no DIRECT) over a
VRF slave whose destination is routed only in the VRF table returns
BPF_FIB_LKUP_RET_NOT_FWDED, and resolves with this patch. On the default
config the lookup succeeds either way, so ordinary testing does not catch
the bug.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20260617224719.1428599-1-avinash.duduskar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool cgroup show and tree call libbpf_find_kernel_btf() to
resolve attach_btf names, but never release the returned BTF object.
For cgroup tree, do_show_tree_fn() is called once for each cgroup
visited by nftw(). When more than one cgroup has attached programs,
each callback overwrites btf_vmlinux with a new object and loses the
previous allocation.
Load vmlinux BTF only once during a tree walk and release it when
cgroup show or tree completes. Reset btf_vmlinux_id at the same time
so batch mode starts with clean state.
Fixes: 596f5fb2ea ("bpftool: implement cgroup tree for BPF_LSM_CGROUP")
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/24357C69B4405079+20260617090117.280222-1-chenyichong@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
llvm commit [1] allowed attaching type tag records to modifier BTF
records. This is useful for using typedefs that encompass a base type
and a type tag, e.g.:
typedef struct rbtree __arena rbtree_t;
Modify btf_check_type_tags() so that it allows this sequence of records.
The function now only checks for record loops in BTF modifier record
chains. Rename to btf_check_modifier_chain_length to reflect this.
Also expand the BTF modifier traversal code to take into account that
type record can be interleaved with other modifier records. In effect
this means traversing all modifiers to collect the type tags.
Also modify existing selftests to now accept modifier records (const,
typedef) that point to type tag records.
[1] https://github.com/llvm/llvm-project/pull/203089
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260616061454.7869-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When BPF_WRITE goes through a PTR_TO_BTF_ID register, check_ptr_to_btf_access()
delegates to env->ops->btf_struct_access(). Most implementations
(bpf_scx_btf_struct_access, tc_cls_act_btf_struct_access, etc.) return
-EACCES for disallowed fields without logging anything, so the verifier
rejects the program with an empty message. For example a scx program doing
1: R1=trusted_ptr_task_struct()
...
4: (7b) *(u64 *)(r1 +0) = r2
verification time 83 usec
the program is rejected
leaves the user guessing which field is off-limits.
Emit verbose message.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260615232146.5491-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is a follow up to recent implementation of
stack_map_get_build_id_offset_sleepable() [1].
stack_map_get_build_id_offset() and its sleepable variant each cached
only the last successfully resolved VMA, with separate bookkeeping in
each function. A run of IPs in a VMA with no usable build ID will
repeat the lookup for every frame: find_vma() in the non-sleepable
path, a VMA lock and a blocking build_id_parse_file() in the sleepable.
Factor the per-call cache into a shared struct stack_map_build_id_cache
with two independent slots [2][3], used by both functions:
* resolved - last VMA that produced a build ID (file, build_id and
range), reused to skip the lookup and the parse;
* unresolved - last VMA with no usable build ID (range only), reused to
emit a raw IP without another lookup or parse.
Keeping the slots independent means a build-ID-less VMA no longer evicts
the last resolved build ID, so a trace alternating between a binary and a
region without one stops re-resolving the binary on every return.
The shared lookup tests [vm_start, vm_end), matching the sleepable path;
the non-sleepable path previously reused a build ID for ip == vm_end
(range_in_vma() is inclusive) and now re-resolves it correctly.
[1] https://lore.kernel.org/bpf/20260525223948.1920986-1-ihor.solodrai@linux.dev/
[2] https://lore.kernel.org/bpf/CAEf4Bza2fRDGhLQoPE-EzM7F34xaEJfi5Exmxb-iWVUN3F06=g@mail.gmail.com/
[3] https://lore.kernel.org/bpf/CAEf4BzZXJFr=1iiVx937ht=4PYQkQHg=eFk810zhMDzXQG3ihw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260615195536.1065107-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For non-linear test_run output, bpf_test_finish() derives the linear
data copy length from copy_size - frag_size. This only matches the
linear data length when copy_size is the full packet size.
When userspace provides a short data_out buffer, copy_size is clamped to
that buffer size. If copy_size is smaller than frag_size, the computed
length becomes negative and bpf_test_finish() returns -ENOSPC before
copying the packet prefix or updating data_size_out.
Compute the linear data length from the packet layout instead, and clamp
the linear copy length to copy_size. This preserves the expected
partial-copy semantics: return -ENOSPC, copy the packet prefix that fits
in data_out, and report the full packet length through data_size_out.
Fixes: 7855e0db15 ("bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260617093557.63880-2-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Nuoqi Gui says:
====================
bpf: Fix stack slot index for Spectre v4 nospec checks
check_stack_write_fixed_off() uses one byte-indexing scheme when checking
whether a fixed-offset stack write needs Spectre v4 sanitization, and another
scheme when recording the write into slot_type[].
For sub-8-byte writes this can make the sanitization check look at bytes that
are not overwritten by the write. A zeroed lower half-slot followed by a write
to the upper half-slot can therefore miss the nospec barrier for the second
write.
Use the same stack-byte index for the sanitization check and the slot update,
and add a focused verifier selftest that expects both half-slot writes to emit
nospec through the unprivileged loader lane.
Bounded impact: this fixes verifier/JIT Spectre v4 mitigation emission for a
fixed-offset stack-write corner case. No architectural verifier memory-safety
bypass, exploit chain, CVE, embargo, or security escalation is claimed.
Fixes: 2039f26f3a ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
---
Changes in v3:
- selftests/bpf: drop the stray space in the __xlated_unpriv stack-store
expectations ("(r10 - 4)"/"(r10 - 8)" -> "(r10 -4)"/"(r10 -8)")
- Link to v2: https://lore.kernel.org/bpf/20260618-f01-11-stack-nospec-slot-index-v2-0-ede9495359b6@mails.tsinghua.edu.cn/
Changes in v2:
- drop __caps_unpriv(CAP_BPF) from the selftest
- fix selftest style
- use Fixes: 2039f26f3a per review
- Link to v1: https://lore.kernel.org/bpf/20260617-f01-11-stack-nospec-slot-index-v1-0-e3a080b0cd7e@mails.tsinghua.edu.cn/
====================
Link: https://patch.msgid.link/20260618-f01-11-stack-nospec-slot-index-v3-0-780297041721@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[].
Fixes: 2039f26f3a ("bpf: Fix leakage due to insufficient speculative store bypass mitigation")
Acked-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/r/20260618-f01-11-stack-nospec-slot-index-v3-1-780297041721@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Tóth János <gomba007@gmail.com>
Link: https://patch.msgid.link/20260515154720.406128-2-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prior to commit 4845865465 ("rtc: ds1307: remove clear of oscillator
stop flag (OSF) in probe"), the oscillator stop flag (OSF) bit was
checked during device probe for the ds1337, ds1339, ds1341, and ds3231
chips; if it was set, it would be cleared and a warning would be logged
saying "SET TIME!". Since that commit, the OSF bit is no longer cleared,
but the warning is still printed.
Directly following that commit, there was no way to get rid of this
warning because nothing cleared the OSF bit on these chips.
The commit associated with the previous commit, 523923cfd5 ("rtc:
ds1307: handle oscillator stop flag (OSF) for ds1341"), made proper use
of the OSF when getting and setting the time in the RTC. However, the
other RTC variants ds1337, ds1339 and ds3231 didn't have a corresponding
change made.
Given that the OSF bit is no longer cleared at probe time when it is
set, the remaining three chips should have the same handling as the
ds1341 chip has for the OSF bit.
Fix the issue on the ds1337, ds1339 and ds3231 chips by applying the
same logic as the ds1341 has to these chips.
Note that any devices brought up between the first referenced commit and
this one may begin mistrusting the time reported by the RTC until it is
set again, if the bit was never explicitly cleared.
Note that only the ds1339 was tested with this change, but the
datasheets for the other chips contain essentially identical
descriptions of the OSF bit so the same change should work.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Fixes: 4845865465 ("rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe")
Reviewed-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Link: https://patch.msgid.link/20260508032518.3696705-2-ronan.dalton@alliedtelesis.co.nz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The condition that needs to be checked for upload completion is the
UPLOAD bit in the completion register going low. The original iterations
of this driver used a do-while and this was converted to a
read_poll_timeout() during upstreaming without the condition being
inverted as it should have been.
I suspect that this went unnoticed until now because a) the first read
was done when the bit was still set, immediately completing the
read_poll_timeout() and b) because the RTC doesn't hold time when power
is removed from the SoC reducing its utility (I for one keep it
disabled). If my first suspicion was true when the driver was
upstreamed, it's not true any longer though, hence the detection of the
problem.
Fixes: 0b31d70359 ("rtc: Add driver for Microchip PolarFire SoC")
CC: stable@vger.kernel.org
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Link: https://patch.msgid.link/20260513-panhandle-ashy-70c6abf84d59@spud
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC_VL_CLR ioctl intends to clear only the battery low flag (BLF),
however the current implementation writes 0 to the status register,
clearing all status bits.
Fix this by writing back the masked status value so that only BLF is
cleared, preserving other status flags.
Fixes: ffe1c5a2d4 ("rtc: abx80x: Implement RTC_VL_READ,CLR ioctls")
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://patch.msgid.link/20260415160610.127155-2-apokusinski01@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In rtca3_set_alarm(), the setup_failed path attempts to disable the
Periodic Interrupt Enable (PIE) bit and wait until it is cleared.
However, the polling condition passed to readb_poll_timeout_atomic()
uses an incorrect expression:
!(tmp & ~RTCA3_RCR1_PIE)
As ~RTCA3_RCR1_PIE evaluates to a mask of all bits except PIE, the
condition effectively waits for all non-PIE bits to become zero, which
is unrelated to the intended operation and is unlikely to ever be true.
This causes the poll to time out unnecessarily.
Fix the condition to check for the PIE bit itself being cleared:
!(tmp & RTCA3_RCR1_PIE)
This correctly waits until PIE is deasserted after being cleared.
Fixes: d448837760 ("rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/20260602192559.1791344-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/ajLy2brwvOZEFNNN@gsse-cloud1.jf.intel.com
- use scoped_guard() for RCU read critical section in
z_erofs_decompress_kickoff();
- simplify the RCU critical section loop in
z_erofs_pcluster_begin().
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Although zeros can be compressed transparently on EROFS using fixed-size
output compression so that it is never prioritized in the Android use
cases, indicating entire pclusters as holes is still useful to preserve
holes in the sparse datasets; otherwise overlayfs will allocate more
space when copying up, and SEEK_HOLE won't report any hole.
This patch introduces two ways to mark a pcluster as a hole:
- A new Z_EROFS_LI_HOLE compatible flag (bit 14) in the HEAD lcluster
advise field for non-compact (full) indexes;
- A 0-block CBLKCNT value on the first NONHEAD lcluster.
The hole tag is preferred for maximum compatibility since pre-existing
kernels that do not understand Z_EROFS_LI_HOLE will decompress at the
stored blkaddr (the same blkaddr will be shared among all sparse
pclusters). Only the 0-block CBLKCNT approach also works for compact
indexes, but it is limited to big pclusters and new kernels.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The dpaa2-switch driver does not support VLAN uppers while its ports are
bridged. This scenario tried to be prevented by rejecting a bridge join
while VLAN uppers exist but the reverse order was still possible.
This patches adds a check so that the dpaa2-switch also does not accept
VLAN uppers while bridged.
Fixes: f48298d3fb ("staging: dpaa2-switch: move the driver out of staging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260618092813.432535-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs.
Fixes: 47ce7c8545 ("net: ipv6: ioam6: fix double reallocation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260618104336.48934-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Zimmermann
Dirk Su
Chris Aherin
Xiang Mei
Igor Putko
Ruoyu Wang
Bartosz Golaszewski
Wei Deng
Wentao Liang
Breno Leitao
Arnd Bergmann
Christophe JAILLET
Huacai Chen
Gao Xiang
Alexei Starovoitov
Amery Hung
Thiébaud Weksteen
Avinash Duduskar
Yichong Chen
Jiri Olsa
Emil Tsalapatis
Ihor Solodrai
Sun Jian
Nuoqi Gui
Uwe Kleine-König (The Capable Hub)
Ronan Dalton
Conor Dooley
Antoni Pokusinski
Lad Prabhakar
Udaya Kiran Challa
Dave Airlie
Ioana Ciornei
Jiayuan Chen
Jakub Kicinski