mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2026-08-14 06:22:34 +02:00
185a4caeecabc150106deda1da170b09f2ad803f
1464154
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Abd-Alrhman Masalkhi
|
a286cb88dd |
md/raid1: honor REQ_NOWAIT when waiting for behind writes
raid1 supports REQ_NOWAIT reads by avoiding waits in the barrier path
through wait_read_barrier(). However, a read can still block on a
WriteMostly device when the array uses a bitmap and there are
outstanding behind writes.
In that case raid1 unconditionally calls wait_behind_writes(), which
may sleep until all behind writes complete. As a result, a REQ_NOWAIT
read can block despite the caller explicitly requesting non-blocking
behavior.
This ensures that raid1 consistently honors REQ_NOWAIT reads across all
paths that may otherwise wait for behind writes.
Fixes:
|
||
 Yu Kuai
|
53528031e7 |
md/raid5: always convert llbitmap bits for discard
llbitmap discard is useful even when no underlying member device supports it. The discard still converts the llbitmap range to unwritten, so later reads and recovery do not rely on stale parity for that range. Let llbitmap discard bypass the raid5 lower discard support check. If lower discard is not safe or not supported, complete the accounted clone after md_account_bio() so the llbitmap conversion callbacks run without member discard bios. Link: https://patch.msgid.link/20260605072639.2434847-4-yukuai@kernel.org Signed-off-by: Yu Kuai <yukuai@fygo.io> |
||
|
Yu Kuai
|
9057309267 |
md/raid5: validate discard support at request time
Raid5 used to disable discard limits when devices_handle_discard_safely was not set or when stacked member limits could not support a full-stripe discard. That hides discard from userspace before raid5 can decide whether a request can be handled safely. Follow other virtual drivers and advertise a UINT_MAX discard limit for the md device. Cache lower discard support in r5conf when setting queue limits, and reject unsupported discard bios before queuing stripe work. Link: https://patch.msgid.link/20260605072639.2434847-3-yukuai@kernel.org Signed-off-by: Yu Kuai <yukuai@fygo.io> |
||
|
Yu Kuai
|
74ddbf98e2 |
md/raid5: account discard IO
Raid5 handles discard bios internally through make_discard_request() and never passes them through md_account_bio(). As a result, discard IO is missing the md-device iostat accounting that normal raid5 IO and discard IO in other raid levels get from md_account_bio(). Before accounting the bio, trim the request to the full data stripes that raid5 will actually discard. The first full stripe is the ceiling of the bio start divided by data-stripe sectors, and the last full stripe is the floor of the bio end divided by data-stripe sectors. Account that exact MD logical full-stripe range, then restore the original iterator so bio completion and iostat still cover the original request. Link: https://patch.msgid.link/20260605072639.2434847-2-yukuai@kernel.org Signed-off-by: Yu Kuai <yukuai@fygo.io> |
||
|
Abd-Alrhman Masalkhi
|
a4c55c9026 |
md/raid1: simplify raid1_write_request() error handling
raid1_write_request() increments rdev->nr_pending before checking the badblocks and then immediately decrements it again when a device is skipped. Move the increment until after the checks succeed so the reference accounting is easier to follow. Consolidate the failure paths so that each error label releases exactly the resources acquired up to that point. err_dec_pending drops pending references and frees the r1bio, while err_allow_barrier handles the barrier release before returning. When a REQ_ATOMIC write cannot be satisfied due to a badblock range, complete the bio with BLK_STS_NOTSUPP rather than reporting an I/O error, since the operation is unsupported rather than having failed during I/O. Rename max_write_sectors to max_sectors and remove the redundant local copy. Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com> Link: https://patch.msgid.link/20260613182810.1317258-5-abd.masalkhi@gmail.com Signed-off-by: Yu Kuai <yukuai@fygo.io> |
||
|
Abd-Alrhman Masalkhi
|
393d687131 |
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. Fixes: |
||
|
Abd-Alrhman Masalkhi
|
e045d6ed33 |
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails. Fixes: |
||
|
Abd-Alrhman Masalkhi
|
8e065a1602 |
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. Fixes: |
||
 Zenghui Yu
|
de9aa5ea2d |
docs: ipmi: Fix path of the "hotmod" module parameter
The correct path of the "hotmod" module parameter should be /sys/module/ipmi_si/parameters/hotmod. Fix it. Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev> Message-ID: <20260620122747.7902-1-zenghui.yu@linux.dev> Signed-off-by: Corey Minyard <corey@minyard.net> |
||
 Ralph Boehme
|
a540a64c48 |
smb: client: refactor ACL setting control flow in id_mode_to_cifs_acl()
Refactor the control flow in id_mode_to_cifs_acl() to reduce nesting and prevent error code overwriting. Instead of wrapping the call to ops->set_acl() in a conditional block, introduce early exits (goto id_mode_to_cifs_acl_exit) when build_sec_desc() fails or ops->set_acl is NULL. This ensures that any actual error returned by build_sec_desc() is not overwritten with -EOPNOTSUPP. Signed-off-by: Ralph Boehme <slow@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
 Linus Torvalds
|
390d73adf8 |
Merge tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
|
||
|
Linus Torvalds
|
1a3746ccbb |
Merge tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strncpy removal from Kees Cook:
- Remove the per-arch strncpy implementations in alpha, m68k, powerpc,
x86, and xtensa
- Remove strncpy API
Over the last 6 years working on strncpy removal there were 362
commits by 70 contributors. Folks with more than 1 commit were:
211 Justin Stitt <justinstitt@google.com>
22 Xu Panda <xu.panda@zte.com.cn>
21 Kees Cook <kees@kernel.org>
17 Thorsten Blum <thorsten.blum@linux.dev>
12 Arnd Bergmann <arnd@arndb.de>
4 Pranav Tyagi <pranav.tyagi03@gmail.com>
4 Lee Jones <lee@kernel.org>
2 Steven Rostedt <rostedt@goodmis.org>
2 Sam Ravnborg <sam@ravnborg.org>
2 Marcelo Moreira <marcelomoreira1905@gmail.com>
2 Krzysztof Kozlowski <krzk@kernel.org>
2 Kalle Valo <kvalo@kernel.org>
2 Jaroslav Kysela <perex@perex.cz>
2 Daniel Thompson <danielt@kernel.org>
2 Andrew Lunn <andrew@lunn.ch>
* tag 'strncpy-removal-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strncpy() from the kernel
xtensa: Remove arch-specific strncpy() implementation
x86: Remove arch-specific strncpy() implementation
powerpc: Remove arch-specific strncpy() implementation
m68k: Remove arch-specific strncpy() implementation
alpha: Remove arch-specific strncpy() implementation
|
||
 Michael Bommarito
|
a6bfdfcc67 |
ieee802154: allow legacy LLSEC ADD/DEL ops to pass strict validation
The LLSEC ADD/DEL doit handlers under the legacy IEEE802154_NL family
consume IEEE802154_ATTR_LLSEC_KEY_BYTES and
IEEE802154_ATTR_LLSEC_KEY_USAGE_COMMANDS, both declared in
net/ieee802154/nl_policy.c as bare length entries with no .type
(defaulting to NLA_UNSPEC). Generic netlink strict validation rejects
all NLA_UNSPEC attributes via validate_nla(), so every LLSEC_ADD_KEY,
LLSEC_DEL_KEY, LLSEC_ADD_DEV, LLSEC_DEL_DEV, LLSEC_ADD_DEVKEY,
LLSEC_DEL_DEVKEY, LLSEC_ADD_SECLEVEL, and LLSEC_DEL_SECLEVEL request
fails at the dispatcher with "Unsupported attribute" before reaching
the handler.
The doit path has been silently dead since strict validation became
the default for genl families that do not opt out. The dump path is
unaffected because dump requests carry no LLSEC attributes to
validate, which is why the LLSEC_LIST_KEY read remained reachable
(patch 1/2). Introduce IEEE802154_OP_RELAXED() mirroring
IEEE802154_OP() but with .validate = GENL_DONT_VALIDATE_STRICT, and
use it for the eight legacy LLSEC mutate ops so admin-driven LLSEC
configuration via the legacy interface works again.
Fixes:
|
||
|
Michael Bommarito
|
9c1e0b6d49 |
ieee802154: admin-gate legacy LLSEC dump operations
In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table
builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV,
LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which
sets no .flags, so generic netlink runs them ungated. The modern
nl802154 family admin-gates the equivalent reads via
NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM.
Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve
the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev
that has an LLSEC key installed; the dump handler writes the raw
16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied
verbatim from struct ieee802154_llsec_key.key) into the reply.
Recovering the AES key compromises 802.15.4 LLSEC link confidentiality
and authenticity, since LLSEC uses CCM* and the same key authenticates
and encrypts frames.
Impact: any local uid with no capabilities can read the raw 16-byte
AES-128 LLSEC key from the kernel keytable on any wpan netdev that has
an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY
dump on the legacy IEEE802154_NL generic-netlink family.
Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but
setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump
entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the
modern nl802154 family exposes their equivalents to unprivileged
readers by design (NL802154_CMD_GET_WPAN_PHY and
NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged
users" annotations).
Fixes:
|
||
 Robertus Diawan Chris
|
649147cb3f |
mac802154: Prevent overwrite return code in mac802154_perform_association()
When assoc_status not equal to IEEE802154_ASSOCIATION_SUCCESSFUL, the
return value assigned to either "-ERANGE" or "-EPERM" but this return
value will be overwritten to 0 after exiting the conditional scope.
So, jump to clear_assoc label to preserve the return value when
assoc_status not equal to IEEE802154_ASSOCIATION_SUCCESSFUL.
This is reported by Coverity Scan as "Unused value".
Fixes:
|
||
 Aleksandr Nogikh
|
4db86f8ab1 |
ieee802154: fix kernel-infoleak in dgram_recvmsg()
KMSAN reported a kernel-infoleak in move_addr_to_user():
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:131 [inline]
BUG: KMSAN: kernel-infoleak in _inline_copy_to_user
include/linux/uaccess.h:205 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120
lib/usercopy.c:26
instrument_copy_to_user include/linux/instrumented.h:131 [inline]
_inline_copy_to_user include/linux/uaccess.h:205 [inline]
_copy_to_user+0xcc/0x120 lib/usercopy.c:26
copy_to_user include/linux/uaccess.h:236 [inline]
move_addr_to_user+0x2e7/0x440 net/socket.c:302
____sys_recvmsg+0x232/0x610 net/socket.c:2925
...
Uninit was stored to memory at:
ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline]
dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739
The issue occurs because the `pan_id` field of `struct ieee802154_addr`
is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`.
The execution flow is as follows:
1. `__ieee802154_rx_handle_packet()` declares a local `struct
ieee802154_hdr hdr` on the stack.
2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse
the source and destination addresses into this structure.
3. If the address mode is `IEEE802154_ADDR_NONE`,
`ieee802154_hdr_get_addr()` previously only set the `mode` field,
leaving the `pan_id` field containing uninitialized stack memory.
4. This uninitialized `pan_id` is later copied into a `struct
sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`.
5. Finally, `move_addr_to_user()` copies the socket address structure to
user space, leaking the uninitialized bytes.
Fix this by using `memset` to zero out the address structure in
`ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`.
Fixes:
|
||
|
Linus Torvalds
|
a975094bf9 |
Merge tag 'exfat-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon: - Convert exfat buffered and direct I/O to the iomap infrastructure - Add the supporting block mapping changes needed for that conversion, including multi-cluster allocation, byte-based cluster mapping helpers - Support SEEK_HOLE/SEEK_DATA and swapfile activation through iomap - Fix damaged upcase-table handling so a zero-sized table does not lead to an infinite loop - Fix a potential use-after-free in exfat_find_dir_entry() - Bound filename-entry advancement in exfat_find_dir_entry() - Preserve benign secondary entries during rename and move - Serialize truncate against in-flight direct I/O - Simplify exfat_lookup() - Replace unsafe arithmetic macros with static inline helpers * tag 'exfat-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: bound uniname advance in exfat_find_dir_entry() exfat: add swap_activate support exfat: preserve benign secondary entries during rename and move exfat: serialize truncate against in-flight DIO exfat: add support for SEEK_HOLE and SEEK_DATA in llseek exfat: add iomap direct I/O support exfat: add iomap buffered I/O support exfat: fix implicit declaration of brelse() exfat: add data_start_bytes and exfat_cluster_to_phys_bytes() helper exfat: add support for multi-cluster allocation exfat: add exfat_file_open() exfat: add balloc parameter to exfat_map_cluster() for iomap support exfat: replace unsafe macros with static inline functions exfat: simplify exfat_lookup() exfat: fix potential use-after-free in exfat_find_dir_entry() exfat: fix handling of damaged volume in exfat_create_upcase_table() |
||
 Doruk Tan Ozturk
|
84a04eb5b2 |
mac802154: llsec: add skb_cow_data() before in-place crypto
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis.
Fixes:
|
||
 Shitalkumar Gandhi
|
6d7f7bcf22 |
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel
address and generally results in an oops.
Use sizeof(fifo_buffer) so the byte count matches pointer width on every
architecture.
The driver has no architecture restriction in Kconfig, so any 64-bit
build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has
been latent since the driver was added in 2017 because it is most
commonly deployed on 32-bit MCUs.
Found via a custom Coccinelle semantic patch hunting for short-byte
kfifo I/O on byte-mode kfifos used to shuttle pointers.
Fixes:
|
||
|
Linus Torvalds
|
dbad5db3a0 |
Merge tag 'ntfs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs updates from Namjae Jeon: - Harden handling of malformed on-disk metadata. This adds stricter validation for attributes, attribute lists, index roots and entries, EA entries, mapping pairs, and $LogFile restart areas. These changes fix several out-of-bounds access, integer overflow, and inconsistent metadata handling issues. - Prevent a writeback deadlock involving extent MFT records - Fix resource leaks in fill_super() failure paths and the name cache - Serialize volume label access and improving its error handling - Fix mapping-pairs decoding bounds and LCN overflow checks - Keep resident index root metadata consistent during resize - Fix the reported size of symbolic links - Avoid an unnecessary allocation for resident inline data - Add support for following and creating Windows native symbolic links. Relative links, absolute links, and junctions are handled, with new mount options controlling native symlink creation and absolute target translation. The existing WSL symlink behavior remains the default. - The unsupported quota code is removed, along with several smaller cleanups * tag 'ntfs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: (39 commits) docs/fs/ntfs: add mount options to support Windows native symbolic links ntfs: support creating Windows native symlinks ntfs: clean up target name conversion for WSL symlinks ntfs: add native_symlink mount option ntfs: support following Windows native symlink with absolute paths ntfs: support following Windows native symlink with relative paths ntfs: fix incorrect size of symbolic link ntfs: use direct pointer for inline data to avoid redundant allocation ntfs: validate resident index root values on lookup ntfs: update index root allocated size before shrink ntfs: grow index root value before reparent header update ntfs: reject non-resident records for resident-only attributes ntfs: fix u16 truncation of restart-area length check ntfs: bound the attribute-list entry in ntfs_read_inode_mount() ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find() ntfs: validate resident attribute lists and harden the validator ntfs: validate resident volume name values on lookup ntfs: reinit search context before volume information lookup ntfs: do not replace volume name after lookup errors ntfs: validate attribute values on lookup ... |
||
|
Shitalkumar Gandhi
|
e09390e439 |
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync().
Fixes:
|
||
 Rik van Riel
|
de3ab9bd31 |
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and
mm_cid.active is set, the CID is checked with cid_in_transit() before
setting the transition bit. In per-CPU mode a newly forked or exec'd
task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are
assigned lazily on schedule-in. With cid_in_transit() the guard passes
for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET |
MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this
to clear_bit() with MM_CID_UNSET as the bit number, triggering an
out-of-bounds write.
Symptoms: this is genuine memory corruption, but a bounded out-of-bounds
write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31),
so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid()
strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence
test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET,
mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object
(after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus()
bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a
fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is
not attacker-influenced (fixed sentinel -> fixed offset) and the op only
clears a single bit; what sits 256 MiB further along the direct map is
whatever kernel object happens to live there, so this corrupts one bit of
unpredictable kernel memory -- it is not an arbitrary-address or
arbitrary-value write.
It triggers only in per-CPU CID mode, when a CPU is running an active
task of the target mm whose cid is still MM_CID_UNSET -- the
fork()/execve() window before that task's next schedule-in assigns it a
real CID -- and a per-CPU -> per-task fixup walks over it (the mode
fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred
max_cids recompute in mm_cid_work_fn()).
In practice syzkaller surfaced it as a KASAN use-after-free reported in
__schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined
via mm_cid_schedout() -> mm_drop_cid().
Guard the transition-bit assignment against MM_CID_UNSET, in addition to
the existing cid_in_transit() check, so the bit is only set on a genuine
task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task
is handled by the cid_on_cpu(pcp->cid) branch above and never reaches
this path, so excluding MM_CID_UNSET (and the already-transitioning case)
is sufficient.
Fixes:
|
||
 Ivan Abramov
|
e69ed6fc9f |
ieee802154: Remove WARN_ON() in cfg802154_pernet_exit()
There's no need to call WARN_ON() in cfg802154_pernet_exit(), since
every point of failure in cfg802154_switch_netns() is covered with
WARN_ON(), so remove it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
|
||
|
Ivan Abramov
|
0569f67ed6 |
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
|
||
|
Ivan Abramov
|
a2e06b4bef |
ieee802154: Restore initial state on failed device_rename() in cfg802154_switch_netns()
Currently, the return value of device_rename() is not acted upon.
To avoid an inconsistent state in case of failure, roll back the changes
made before the device_rename() call.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes:
|
||
|
Linus Torvalds
|
5e2e14749c |
Merge tag 'landlock-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün: "This adds new Landlock access rights to control UDP bind and connect/send operations, and a new "quiet" feature to mute specific specific audit logs (and other future observability events). A few commits also fix Landlock issues" * tag 'landlock-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (24 commits) selftests/landlock: Add tests for invalid use of quiet flag selftests/landlock: Add tests for quiet flag with scope selftests/landlock: Add tests for quiet flag with net rules selftests/landlock: Add tests for quiet flag with fs rules selftests/landlock: Replace hard-coded 16 with a constant samples/landlock: Add quiet flag support to sandboxer landlock: Suppress logging when quiet flag is present landlock: Add API support and docs for the quiet flags landlock: Add a place for flags to layer rules landlock: Add documentation for UDP support samples/landlock: Add sandboxer UDP access control selftests/landlock: Add tests for UDP send selftests/landlock: Add tests for UDP bind/connect landlock: Add UDP send+connect access control landlock: Add UDP bind() access control landlock: Fix unmarked concurrent access to socket family selftests/landlock: Explicitly disable audit in teardowns selftests/landlock: Test SCOPE_SIGNAL on the SIGIO/fowner pgid path landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path landlock: Demonstrate best-effort allowed_access filtering ... |
||
|
Linus Torvalds
|
e2c0595b56 |
Merge tag 'for-next-keys-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys update from Jarkko Sakkinen: "This contains only bug fixes" * tag 'for-next-keys-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: keys: keyctl_pkey: replace BUG with return -EOPNOTSUPP keys: request_key: replace BUG with return -EINVAL keys: Pin request_key_auth payload in instantiate paths keys: prevent slab cache merging for key_jar keys: Replace strcpy(derived_buf, "AUTH_KEY") with strscpy(..., HASH_SIZE) KEYS: Use acquire when reading state in keyring search keys/trusted_keys: mark 'migratable' as __ro_after_init keys: use kmalloc_flex in user_preparse KEYS: trusted: Debugging as a feature KEYS: encrypted: Remove unnecessary selection of CRYPTO_RNG KEYS: fix overflow in keyctl_pkey_params_get_2() |
||
 Xu Rao
|
71b57aca29 |
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
Before commit |
||
|
Linus Torvalds
|
0798268aa4 |
Merge tag 'integrity-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar: - Introduce IMA and EVM post-quantum ML-DSA signature support ML-DSA signature support for IMA and EVM is limited to sigv3 signatures, which calculates and verifies a hash of a compact structure containing the file data/metadata hash, hash type, and hash algorithm. IMA and EVM still calculate the file data/metadata hashes respectively. - Introduce support for removing IMA measurement list records stored in kernel memory The IMA measurement list can grow large depending on policy, but removing records breaks remote attestation, unless they are safely preserved and made available for attestation requests. Until environments are prepared to preserve the measurement records, a new CONFIG_IMA_STAGING Kconfig option is introduced to guard against deletion. Several approaches for removing measurement list records were evaluated but rejected due to filesystem constraints, the introduction of a new critical data record, and locking concerns. Two methods are being upstreamed: staged deletion with confirmation, and staged deletion of N records without confirmation. Both methods minimize the period during which new measurements are blocked from being appended to the measurement list by staging the measurement list. A comparison of the two methods is included in the documentation. - Some code cleanup, and a couple of bug fixes * tag 'integrity-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: doc: security: Add documentation of exporting and deleting IMA measurements ima: Support staging and deleting N measurements records ima: Add support for flushing the hash table when staging measurements ima: Add support for staging measurements with prompt ima: Introduce ima_dump_measurement() ima: Use snprintf() in create_securityfs_measurement_lists ima: Mediate open/release method of the measurements list ima: Introduce _ima_measurements_start() and _ima_measurements_next() ima: Introduce per binary measurements list type binary_runtime_size value ima: Introduce per binary measurements list type ima_num_records counter ima: Replace static htable queue with dynamically allocated array ima: Remove ima_h_table structure evm: terminate and bound the evm_xattrs read buffer integrity: Add support for sigv3 verification using ML-DSA keys integrity: Refactor asymmetric_verify for reusability integrity: Check that algo parameter is within valid range integrity: Check for NULL returned by asymmetric_key_public_key ima: return error early if file xattr cannot be changed ima: Fix sigv3 signature handling for EVM_IMA_XATTR_DIGSIG |
||
 Andy Shevchenko
|
78ad5c7722 |
ACPI: resource: Amend kernel-doc style
The functions are referred as func() in the kernel-doc. The % (percent)
character makes the rendering for constants as described in the respective
documentation. Amend all these.
Fixes:
|
||
|
Zenghui Yu
|
b2b42ad228 |
ACPI: sysfs: Fix path of module parameters in comments
The correct path of module parameters should be /sys/module/acpi/parameters/xxx. Fix them. Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev> Link: https://patch.msgid.link/20260611142518.77343-1-zenghui.yu@linux.dev Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
 Ricardo Neri
|
b91d287fa7 |
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
The function thermal_throttle_add_dev() may fail and abort a CPU hotplug
online operation. Since the failure occurs within the online callback,
thermal_throttle_online(), the CPU hotplug framework does not invoke the
corresponding offline callback. As a result, the hardware and software
resources set up during the failed operation are not torn down.
Since only thermal_throttle_add_dev() can fail, call it before setting up
the rest of the resources.
Fixes:
|
||
|
Linus Torvalds
|
a552c81ff4 |
Merge tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
||
 Joy Zou
|
fbef4191b4 |
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
The PMIC PCA9451A and PCA9452 have a default power-off debounce time of 2ms according to their datasheet, while PCA9450A and PCA9450BC use 120us. Add default_t_off_deb field to struct pca9450 to support per-variant default configuration when the device tree property is not specified. Datasheet reference links: - PCA9451A Rev.2.1: https://www.nxp.com/docs/en/data-sheet/PCA9451A.pdf - PCA9452 Rev.1.0: https://www.nxp.com/docs/en/data-sheet/PCA9452.pdf Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260618-b4-regulator-opt-v1-1-c43b1f62aaf6@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
 Changhuang Liang
|
914e708e30 |
spi: dw: Add support for snps,dwc-ssi-2.00a
Add a new compatible entry "snps,dwc-ssi-2.00a" for the Synopsys DesignWare SSI controller version 2.00a. This variant uses the same initialization routine as snps,dwc-ssi-1.01a (dw_spi_hssi_init). Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://patch.msgid.link/20260619143443.22267-3-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Changhuang Liang
|
07f251e0ed |
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
Add a new compatible string "starfive,jhb100-spi" for the StarFive JHB100 SPI, it based on the Synopsys DesignWare SSI version 2.00a, uses snps,dwc-ssi-2.00a as the primary fallback and snps,dwc-ssi-1.01a as the secondary fallback. Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260619143443.22267-2-changhuang.liang@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
 Breno Leitao
|
4cc70f7585 |
arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS
hw_breakpoint_arch_parse() positions the BAS bit pattern in
hw->ctrl.len with
offset = hw->address & alignment_mask; /* 0..7 */
hw->ctrl.len <<= offset;
ctrl.len is an 8-bit bitfield (struct arch_hw_breakpoint_ctrl::len is
u32 :8), so the shift silently drops any bits past bit 7. For
non-compat AArch64 watchpoints the offset is unbounded relative to
ctrl.len: a perf_event_open(PERF_TYPE_BREAKPOINT) caller asking for
HW_BREAKPOINT_W with bp_addr=page+1 and bp_len=HW_BREAKPOINT_LEN_8
ends up with 0xff << 1 = 0x1fe, stored as 0xfe. The kernel programs
WCR.BAS=0xfe and the hardware watches bytes [1..7] instead of the
requested [1..8] -- the eighth byte is silently dropped. The
syscall still returns success, leaving userspace to discover the
gap by empirical probing.
The same class affects HW_BREAKPOINT_LEN_{2,4} when offset pushes the
high BAS bit past bit 7 (e.g. LEN_4 with offset=5 yields 0xe0
instead of 0x1e0). No memory-safety impact -- the value is masked
into 8 bits before encoding -- but debuggers and perf users observe
missed events on bytes they thought they were watching.
The AArch32 branch immediately above already rejects unrepresentable
(offset, len) combinations via an explicit switch. Mirror that for
the non-compat branch by checking that the shifted pattern fits in
the BAS field, returning -EINVAL when it does not.
GDB and similar debuggers are unaffected by the stricter check.
aarch64_linux_set_debug_regs() already treats EINVAL on
NT_ARM_HW_WATCH as a downgrade signal: it clears
kernel_supports_any_contiguous_range, calls aarch64_downgrade_regs()
to round the BAS up to a legacy 0x01/03/0f/ff mask with an aligned
base, and retries -- the same fallback path that PR-20207 introduced.
The new -EINVAL is therefore reachable only from a raw
perf_event_open() that pairs an unaligned base with an oversized
bp_len, which is precisely the bug.
Reproducer:
struct perf_event_attr a = {
.type = PERF_TYPE_BREAKPOINT, .size = sizeof(a),
.bp_type = HW_BREAKPOINT_W,
.bp_addr = (uintptr_t)(buf + 1),
.bp_len = HW_BREAKPOINT_LEN_8,
.exclude_kernel = 1, .exclude_hv = 1,
};
int fd = perf_event_open(&a, 0, -1, -1, 0);
/* before this fix: succeeds, watches 7 bytes (buf+1..buf+7) */
/* after this fix: fails with EINVAL */
Fixes:
|
||
|
Linus Torvalds
|
c98d767b34 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
||
|
Linus Torvalds
|
08c7183f5b |
Merge tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - use software nodes for GPIO code - cleanups and fixes * tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits) mips: select legacy gpiolib interfaces where used MIPS: lib: Remove '.hidden' for local symbols MIPS: VDSO: Avoid including .got in dynamic segment MIPS: smp: report dying CPU to RCU in stop_this_cpu() MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo() MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo() mips: sched: Fix CPUMASK_OFFSTACK memory corruption MIPS: mm: Fix out-of-bounds write in maar_res_walk() MIPS: ath79: reduce ARCH_DMA_MINALIGN mips: dts: ar9132: fix wdt node name mips: Remove remaining defconfig references to the pktcdvd driver MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP MIPS: alchemy: db1300: switch to static device properties MIPS: alchemy: gpr: switch to static device properties MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties MIPS: alchemy: mtx1: attach software nodes to GPIO chips MIPS: alchemy: provide visible function prototypes to board files MIPS: alchemy: platform: add missing include MIPS: ip22-gio: do not export device release function MIPS: ip22-gio: switch to dynamic root device ... |
||
|
Linus Torvalds
|
91981f96d2 |
Merge tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Enable GENERIC_ENTRY feature
- Add missing property in DTS for mpc83xx platform
- Enable building of DTB based on platfrom Kconfig
- Add powerpc64 JIT support for timed may_goto
- Add timeout to RTAS busy-wait loops
- Simplify cpumask api usage for cpuinfo display
- implement get_direction() in cpm1 (8xx platform)
- MAINTAINERS file update for power VMX AES entries
- Fixes to handle preempt count
- Restore KUAP registers on syscall restart exit
- define MIN_RMA in bytes rather than MB
- misc fixes and cleanups
Thanks to Aboorva Devarajan, Adriano Vero, Amit Machhiwal, Anushree
Mathur, Bartosz Golaszewski, Christophe Leroy (CS GROUP), David Gow,
Jinjie Ruan, J. Neuschäfer, Linus Walleij, Mahesh Salgaonkar, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Saket Kumar Bhaskar,
Samir M, Sayali Patil, Shirisha G, Shivang Upadhyay, Shrikanth Hegde,
Sourabh Jain, Thorsten Blum, Venkat Rao Bagalkote, and Yury Norov.
* tag 'powerpc-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (32 commits)
powerpc/fadump: define MIN_RMA in bytes rather than MB
powerpc: Restore KUAP registers on syscall restart exit
powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus
powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
powerpc/boot: Allow text relocations for pseries wrapper with binutils 2.46+
powerpc: Simplify access_ok()
powerpc/entry: Disable interrupts before irqentry_exit
powerpc/8xx: implement get_direction() in cpm1
powerpc/pseries/lparcfg: Replace deprecated strcpy in parse_system_parameter_string
powerpc: Fix indentation and replace typedef with struct name
powerpc/rtas: Replace one-element array with flexible array member
powerpc: use sysfs_emit{_at} in sysfs show functions
MAINTAINERS: powerpc: update VMX AES entries
ppc/fadump: invoke kmsg_dump in fadump panic path
powerpc/xive: Add warning if target CPU not found
powerpc/perf: Use cpumask_intersects api for checking disable path
powerpc: Simplify cpumask api usage for cpuinfo display
powerpc: Use cpumask_next_wrap instead
powerpc/fadump: Add timeout to RTAS busy-wait loops
...
|
||
 Arnd Bergmann
|
998d4d789d |
arm64: static_call: include asm/insns.h
I came a cross a missing declaration in a randconfig build:
arch/arm64/kernel/static_call.c:16:5: error: call to undeclared function 'aarch64_insn_adrp_get_offset'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
16 | aarch64_insn_adrp_get_offset(le32_to_cpup(tramp + 4)) +
| ^
Include the header that contains this definition explicitly,
rather than relying on it to come indirectly through another
header.
Fixes:
|
||
 Holger Dengler
|
1ac287e2af |
s390/pkey: Check length in pkey_pckmo handler implementation
Explicitly check the length of the target buffer in the pkey_pckmo
implementation of the key_to_protkey() handler function. The handler
function fails, if the generated output data exceeds the length of the
provided target buffer.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Holger Dengler
|
b3d4ab2d7d |
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
Explicitly check the buffer length request structure provided by
user-space and fail, if it exceeds the buffer size.
Cc: stable@vger.kernel.org
Fixes:
|
||
 Lorenzo Bianconi
|
f4c2d8668d |
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
Fix nf_flow_ip6_tunnel_proto() to use pskb_may_pull() instead of
skb_header_pointer() to ensure the outer IPv6 header is in the skb
headroom, which is required for subsequent packet processing. Move
ctx->offset update inside the IPPROTO_IPV6 conditional block since it
should only be adjusted when an IP6IP6 tunnel is actually detected.
Simplify the rx path by removing ipv6_skip_exthdr() and checking
ip6h->nexthdr directly, as the flowtable fast path only handles simple
IP6IP6 encapsulation without extension headers.
Drop the tunnel encapsulation limit destination option support from the
tx path to match, since the rx path no longer handles extension headers.
Remove the encap_limit parameter from nf_flow_offload_ipv6_forward(),
nf_flow_tunnel_ip6ip6_push() and nf_flow_tunnel_v6_push(), along with
the ipv6_tel_txoption struct and related headroom/MTU adjustments.
Fixes:
|
||
 Wyatt Feng
|
5feba91006 |
netfilter: xt_cluster: reject template conntracks in hash match
xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully
initialized conntrack and passes it to xt_cluster_hash().
This causes a state confusion bug when the raw table CT target attaches
a template conntrack to skb->_nfct before normal conntrack processing.
Templates carry IPS_TEMPLATE status but do not have a valid tuple for
hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the
zeroed l3num field.
Reject template conntracks before hashing them. This matches existing
netfilter handling for template objects and avoids hashing incomplete
conntrack state.
Fixes:
|
||
 Haoze Xie
|
c9c9b37f8c |
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes:
|
||
 Peter Zijlstra
|
e62d4192e5 |
perf: Fix addr_filter_ranges lifetime
Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed. Reported-by: Lee Jia Jie <jiajie.lee@starlabs.sg> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
 Adrian Bente
|
53b3e60edb |
netfilter: flowtable: fix offloaded ct timeout never being extended
OpenWrt has recently migrated many platforms to kernel 6.18. On the
MediaTek platform, which supports hardware network offloading, WiFi
connections accelerated via the WED path were observed to drop after
roughly 300 seconds.
After several debugging sessions, assisted by the Claude LLM, the
problem was narrowed down as follows:
nf_flow_table_extend_ct_timeout() extends ct->timeout for offloaded
flows using:
cmpxchg(&ct->timeout, expires, new_timeout);
'expires' comes from nf_ct_expires(ct) and is a relative value, while
ct->timeout holds an absolute timestamp. The two are never equal, so
the cmpxchg always fails and the timeout is never extended.
This goes unnoticed for most flows, but a long-lived hardware (WED)
offloaded flow on MediaTek MT7986 eventually has ct->timeout decay to
zero, the conntrack entry is reaped and the connection breaks.
Open-code the relative value from a single READ_ONCE(ct->timeout)
snapshot and compare against that same absolute snapshot in the
cmpxchg, so the timeout extension actually takes effect while the
datapath remains authoritative if it updates ct->timeout concurrently.
Fixes:
|
||
 Bartosz Golaszewski
|
442d60df74 |
x86/platform/geode: reference the real node of the cs5535 GPIO controller
GPIO software node lookup should rely exclusively on matching the addresses of the referenced firmware nodes. Commit |
||
|
Bartosz Golaszewski
|
9611c0ce21 |
Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current
This pulls in the merge commit for MFD updates for v7.2. The PR contains a build-time dependency of one of the GPIO commits that will follow. |