The HP EliteBook 840 G6 (PCI SSID 103c:854d) has an ALC215 codec whose
mic-mute and audio-mute LEDs are wired to the same GPIOs as the already
supported EliteBook 830 G6 and 840 G7. Without a matching quirk the LEDs
are never registered, so the front-panel mic-mute LED stays permanently
lit and does not track the mute state.
Apply ALC285_FIXUP_HP_GPIO_LED, mirroring the sibling EliteBook entries.
With this fixup the codec registers an "hda::micmute" LED class device and
the LED correctly follows the capture-mute state. This was verified on the
affected machine by forcing the same fixup at runtime via
snd_sof_intel_hda_generic.hda_model=103c:8548, which made the LED work as
expected.
Signed-off-by: Ramcharan Rajpurohit <b23ci1032@iitj.ac.in>
Link: https://patch.msgid.link/20260619062435.26256-1-b23ci1032@iitj.ac.in
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Fixes: d9c9987686 ("ALSA: usb-audio: Create UMP blocks from USB MIDI GTBs")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260618170010.191433-1-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to a rustc bug, the -Cforce-frame-pointers=y flag only emits the
frame-pointer annotation for functions, but not for the module. This
means that functions generated by the LLVM backend such as
'asan.module_ctor' do not receive the frame-pointer annotation.
This is likely to lead to broken backtraces and may also cause issues
with ftrace if these features are used with functions generated by the
LLVM backend.
Thus, use -Zllvm_module_flag to work around this rustc bug if using a
rustc without the fix.
[ The fix [1] has landed for Rust 1.98.0 (expected release on
2026-08-20). - Miguel ]
Cc: stable@vger.kernel.org # 6.12.y and later (flag not available in pinned Rust in older LTSs).
Fixes: 2f7ab1267d ("Kbuild: add Rust support")
Link: https://github.com/rust-lang/rust/pull/156980 [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260616-frame-ptr-fix-v1-1-dc6b29a631d9@google.com
[ - Adjusted Cc: stable@ as discussed.
- Added comment with link to the PR, similar to what we did in commit
ac35b5580a ("rust: arm64: set uwtable llvm module flag for
CONFIG_UNWIND_TABLES").
- Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `-> Result<(), impl core::fmt::Debug>` string is generated by rustdoc
and by adding "::" into the string it no longer finds anything, making
the line useless.
Remove the "::" in the pattern. Omit it in the replacement too, for
consistency with upstream rustdoc.
Fixes: de7cd3e4d6 ("rust: use absolute paths in macros referencing core and kernel")
Signed-off-by: Gary Guo <gary@garyguo.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260616132559.2245814-1-gary@kernel.org
[ Added link in code comment to `rustdoc`'s 1.87 PR that fully qualified
it for context. Improved comments for consistency. Reworded to drop
changelog and to fix typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull RISC-V updates from Paul Walmsley:
- Prevent get_free_mem_region() from returning regions that are
unmappable in certain circumstances by defining
DIRECT_MAP_PHYSMEM_END for RISC-V
- Fix an early boot problem with kexec_file when the amount of
installed physical memory installed on the system exceeds the direct
map size, which is possible in certain RISC-V virtual memory modes
- Unconditionally sfence.vma in the new vmalloc area handling code in
the page fault handler, since even the presence of Svvptc doesn't
guarantee that the CPU won't immediately fault again after the
exception handler completes and subsequently crash
- Fix ftrace_graph_ret_addr() to use the correct task pointer (aligning
with what other architectures do)
- Fix the misaligned access performance checking code in cases when
performance is specified on the kernel command line and when CPUs
have been brought offline and back online
- Get rid of a bogus address offset in the non-frame-pointer version of
walk_stackframe(), aligning it with the frame pointer-based code
- Fix a RISC-V kfence issue causing bogus use-after-free warnings
- Add ARCH_HAS_CC_CAN_LINK for RISC-V, which needs different compiler
command line flags than other architectures
- Implement _THIS_IP_ using RISC-V-specific assembly, which seems to be
less brittle (from a compiler point of view) than taking the address
of a label
- Reduce kernel startup overhead by defining
HAVE_BUILDTIME_MCOUNT_SORT, since arch/riscv meets all the
requirements
- Patch the CFI vDSO during alternatives processing, not only the
standard vDSO
- Fix a potential memory leak in the cacheinfo code
- Clean up kernel/setup.c:add_resource() to pass along the return value
from insert_resource() and to improve the display of resource ranges
- Clean up our purgatory.[ch] by aligning our purgatory() prototype to
what's in arch/x86, and by cleaning up verify_sha256_digest()
- Clean up cpu_is_stopped() to align its function a little more closely
to its name
- Replace some unbounded string function usage in get_early_cmdline()
and the ptdump code with strscpy()
- Replace sprintf() with sysfs_emit() in cpu_show_ghostwrite() for
safer bounds checking
- Standardize how compiler output flags are specified in the RISC-V
kselftests, aligning them with what other architectures do
- Use the Linux-generic cmp_int() macro in place of an open-coded
"cmp_3way()" macro in kernel/module-sections.c
- Panic early in boot if IRQ handler stacks can't be allocated rather
than pretending to continue normally
- Add support for Eswin SoCs in the RISC-V defconfig
- Remove some unnecessary conditionals in sbi_hsm_hart_{start,stop}()
- Clean up some Kconfig infelicities found by Kconfirm
- Replace an open-coded version of min() in the kexec_elf code with
the standard min() function
* tag 'riscv-for-linus-7.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
riscv: traps_misaligned: Avoid redundant unaligned access speed probe
riscv: misaligned: Fix fast_unaligned_access_speed_key init
riscv: also select ARCH_KEEP_MEMBLOCK if kexec is selected
riscv: alternative: Also patch the CFI vDSO
riscv: alternative: Pass vDSO start as parameter to apply_vdso_alternatives()
riscv: alternative: Use IS_ENABLED() over ifdeffery for apply_vdso_alternatives()
riscv: vdso: Always declare vdso_start symbols
riscv: kexec: use min to simplify riscv_kexec_elf_load
riscv: panic if IRQ handler stacks cannot be allocated
riscv: mm: Unconditionally sfence.vma for spurious fault
riscv: mm: Use the bitmap API for new_valid_map_cpus
riscv: mm: Rename new_vmalloc into new_valid_map_cpus
riscv: kfence: Call mark_new_valid_map() for kfence_unprotect()
riscv: mm: Extract helper mark_new_valid_map()
riscv: stacktrace: Remove bogus -0x4 offset in non-FP walk_stackframe
riscv: cacheinfo: Fix node reference leak in populate_cache_leaves
riscv: kexec_file: Constrain segment placement to direct map
riscv: mm: Define DIRECT_MAP_PHYSMEM_END
riscv: defconfig: Enable Eswin SoCs
riscv: cpu_ops_sbi: No need to be bothered to check ret.error
...
Pull ring-buffer updates from Steven Rostedt
- Do not invalidate entire buffer for invalid sub-buffers
For the persistent ring buffer, if one sub-buffer is found to be
invalid, it invalidates the entire per CPU ring buffer. This can lose
a lot of valuable data if there's some corruption with the writes to
the buffer not syncing properly on a hard crash. Instead, if a
sub-buffer is found to be invalid, simply zero it out and mark it for
"missed events".
When the persistent ring buffer is read and a sub-buffer that was
cleared due to being invalid on boot up is discovered, the output
will show "[LOST EVENTS]" to let the user know that events were
missing at that location. Displaying the events from valid buffers
can still be useful.
- Add a test to be able to test corrupted sub-buffers
If a persistent ring buffer is created as "ptraingtest" and the new
config that adds the test is enabled, when a panic happens, the
kernel will randomly corrupt one of the per CPU ring buffers. On boot
up, the sub-buffers with the corruption should be cleared and
flagged. When reading this buffer, the missed events should should
[LOST EVENTS].
- Add commit number in the sub-buffer meta debug info
The commit is used to know the content of a meta page. Add it to the
buffer_meta file that is shown for each per CPU buffer.
- Clean up the persistent ring buffer validation code
Add some helper functions and make variable names more consistent.
* tag 'trace-ring-buffer-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Better comment the use of RB_MISSED_EVENTS
ring-buffer: Show persistent buffer dropped events in trace_pipe file
ring-buffer: Show persistent buffer dropped events in trace file
ring-buffer: Have dropped subbuffers be persistent across reboots
ring-buffer: Cleanup buffer_data_page related code
ring-buffer: Cleanup persistent ring buffer validation
ring-buffer: Show commit numbers in buffer_meta file
ring-buffer: Add persistent ring buffer invalid-page inject test
ring-buffer: Skip invalid sub-buffers when rewinding persistent ring buffer
ring-buffer: Skip invalid sub-buffers when validating persistent ring buffer
Pull tracing updates from Steven Rostedt:
- Remove a redundant IS_ERR() check
trace_pipe_open() already checks for IS_ERR() and does it again in
the return path. Remove the return check.
- Export seq_buf_putmem_hex() to allow kunit tests against them
To add Kunit tests on seq_buf_putmem_hex(), it needs to be exported.
- Replace strcat() and strcpy() with seq_buf() logic
The code for synthetic events uses a series of strcat() and strcpy()
which can be error prone. Replace them with seq_buf() logic that does
all the necessary bound checking.
- Add a lockdep rcu_is_watching() to trace_##event##_enabled() call
The trace_##event##_enabled() is a static branch that is true if the
"event" is enabled. But this can hide bugs if this logic is in a
location where RCU is disabled and not "watching". It would only
trigger if lockdep is enabled and the event is enabled.
Add a "rcu_is_watching()" warning if lockdep is enabled in that
helper function to trigger regardless if the event is enabled or not.
- Remove the local variable in the trace_printk() macro
For name space integrity, remove the _______STR variable in the
trace_printk() macro for using the sizeof() macro directly.
- Use guard()s for the trace_recursion_record.c file
- Fix typo in a comment of eventfs_callback() kerneldoc
- Use trace_call__##event() in events within trace_##event##_enabled()
A couple of events are called within an if block guarded by
trace_##event##_enabled(). That is a static key that is only enabled
when the event is enabled. The trace_call_##event() calls the
tracepoint code directly without adding a redundant static key for
that check.
- Allow perf to read synthetic events
Currently, perf does not have the ability to enable a synthetic
event. If it does, it will either cause a kernel warning or error
with "No such device". Synthetic events are not much different than
kprobes and perf can handle fine with a few modifications.
- Replace printk(KERN_WARNING ...) with pr_warn()
- Replace krealloc() on an array with krealloc_array()
- Fix README file path name for synthetic events
- Change tracing_map tracing_map_array to use a flexible array
Instead of allocating a separate pointer to hold the pages field of
tracing_map_array, allocate the pages field as a flexible array when
allocating the structure.
- Fold trace_iterator_increment() into trace_find_next_entry_inc()
The function trace_iterator_increment() was only used by
trace_find_next_entry_inc(). It's not big enough to be a helper
function for one user. Fold it into its caller.
- Make field_var_str field a flexible array of hist_elt_data
Instead of allocating a separate pointer for the field_var_str array
of the hist_elt_data structure, allocate it as a flexible array when
allocating the structure.
- Disable KCOV for trace_irqsoff.c
Like trace_preemptirq.c, trace_irqsoff.c has code that will crash
when KCOV is enabled on ARM. The irqsoff tracing can be called on ARM
because the irqsoff tracing code can be run from early interrupt code
and produce coverage unrelated to syscall inputs.
- Fix warning in __unregister_ftrace_function() called by perf
Perf calls unregister_ftrace_function() without checking if its
ftrace_ops has already been unregistered. There's an error path where
on clean up it will unregister the ftrace_ops even if it wasn't
registered and causes a warning.
* tag 'trace-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
tracing: Disable KCOV instrumentation for trace_irqsoff.o
tracing: Turn hist_elt_data field_var_str into a flexible array
tracing: Move trace_iterator_increment() into trace_find_next_entry_inc()
tracing: Simplify pages allocation for tracing_map logic
tracing: Fix README path for synthetic_events
tracing: Use krealloc_array() for trace option array growth
tracing/branch: Use pr_warn() instead of printk(KERN_WARNING)
tracing: Allow perf to read synthetic events
HID: Use trace_call__##name() at guarded tracepoint call sites
cpufreq: amd-pstate: Use trace_call__##name() at guarded tracepoint call site
tracefs: Fix typo in a comment of eventfs_callback() kerneldoc
tracing: Switch trace_recursion_record.c code over to use guard()
tracing: Remove local variable for argument detection from trace_printk()
tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()
tracing: Bound synthetic-field strings with seq_buf
seq_buf: Export seq_buf_putmem_hex() and add KUnit tests
tracing: Remove redundant IS_ERR() check in trace_pipe_open()
When __fbnic_set_rx_mode() is called from contexts other than
.ndo_set_rx_mode_async(), the uc and mc addr lists are accessed
without the addr lock that __hw_addr_sync_dev() and
__hw_addr_unsync_dev() require. Wrap these unprotected accesses with
netif_addr_lock_bh(). fbnic_clear_rx_mode() has similar issues.
Fixes: eb690ef8d1 ("eth: fbnic: Add L2 address programming")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617-linux-fbnic-hwaddr-v1-1-3f9f5dee7f99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617075818.37431-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_rm_size() handles RDS_CMSG_RDMA_ARGS after only CMSG_OK() and then
calls rds_rdma_extra_size(), which reads args->local_vec_addr and
args->nr_local without first checking that cmsg_len covers struct
rds_rdma_args. The other two RDS_CMSG_RDMA_ARGS consumers already guard
this: rds_rdma_bytes() in rds_sendmsg() and rds_cmsg_rdma_args() in
rds_cmsg_send() both reject cmsg_len < CMSG_LEN(sizeof(struct
rds_rdma_args)). Add the same check to rds_rm_size() so all three RDMA
args passes are consistent.
This is a consistency and hardening change with no behavioral effect for
well-formed senders and no reachable bug today: rds_rdma_bytes() runs
before rds_rm_size() in rds_sendmsg() and already rejects a short
RDS_CMSG_RDMA_ARGS, so the size pass is not reached with an undersized
cmsg. But rds_rm_size() reads the args independently of that earlier
pass, and nothing in rds_rm_size() itself records or enforces the
precondition, so a reader or a future refactor of the size pass cannot
tell the cmsg has already been length-checked. Applying the same
cmsg_len guard in all three RDS_CMSG_RDMA_ARGS consumers keeps that
invariant local to each and robust to reordering.
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260617023146.2780077-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like commit a24162f18825("i40e: don't advertise IFF_SUPP_NOFCS"),
ngbe and txgbe also advertises IFF_SUPP_NOFCS and allowing users
to use the SO_NOFCS socket option. But the driver does not check
skb->no_fcs, so this option is silently ignored.
With this change, send() fails with -EPROTONOSUPPORT when AF_PACKET
socket is set SO_NOFCS option.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Link: https://patch.msgid.link/20260617092854.133992-1-clementwei90@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
create_queues_with_size_backoff() creates XDP TX queues before setting
up the regular TX path. If the subsequent allocation or creation of
regular TX queues fails, the error handling paths omit the teardown of the
XDP TX queues, leading to a resource leak.
Fix this by explicitly destroying the XDP TX queue subset at the two
missing failure points.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have
an ENA device to test with, no runtime testing was able to be performed.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing.
Cc: stable@vger.kernel.org
Fixes: 5e37d8254e ("gve: Add header split data path")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260617013208.3781453-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()").
Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/178163152194.2486768.14724194232649760778@maoyixie.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nt->buf is exactly MAX_PRINT_CHUNK bytes, but scnprintf() reserves one
byte for its NUL terminator, so a non-fragmented payload of exactly
MAX_PRINT_CHUNK loses its last byte (emitted as a stray NUL in the
release path). Grow nt->buf to MAX_PRINT_CHUNK + 1 and bound the
scnprintf() calls with sizeof(nt->buf); the transmitted length stays
capped at MAX_PRINT_CHUNK.
Alternatively, nt->buf could be left at MAX_PRINT_CHUNK and the NUL byte
reserved by routing exactly-MAX_PRINT_CHUNK payloads to fragmentation
('len < MAX_PRINT_CHUNK'), at the cost of fragmenting those messages.
But it would look less sane, thus the current approach.
Fixes: c62c0a17f9 ("netconsole: Append kernel version to message")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616-max_print_chunk-v1-1-8dc125d67083@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter.
Reported-by: syzbot+fa2f5b1fb06147be5e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa2f5b1fb06147be5e16
Fixes: 67a900cc04 ("flow_dissector: introduce support for Ethernet addresses")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260616123057.482154-1-yun.zhou@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
foe_check_time is declared as u16 pointer but was allocated with
only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16).
When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2,
it writes beyond the allocated buffer, causing heap buffer overflow and
potential kernel crash.
Fixes: 6d5b601d52 ("net: airoha: ppe: Dynamically allocate foe_check_time array in airoha_ppe struct")
Signed-off-by: Wayen Yan <win847@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/178161119471.2163752.14373384830691569758@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a node is created via rate-new with tc-bw and a parent node,
devlink_nl_rate_set() executes the sequence of ops. It bails out on the
first failure and doesn't rollback anything. For most things that is
fine (setting some numbers), but the parent set can leak if there's
another failure after that.
That is precisely what happens when parent setting isn't the last block
in the function. After the referenced "Fixes" commit, when tc-bw fails
to be set the function bails out after having set the parent and
incremented its refcount.
There are two callers:
- devlink_nl_rate_set_doit() is fine, it just reports the error.
- but devlink_nl_rate_new_doit() frees the newly created node and leaks
the parent refcnt.
Fix that by reordering the blocks so parent setting is last and adding a
comment explaining this so future modification preserve the ordering
(hopefully).
Fixes: 566e8f108f ("devlink: Extend devlink rate API with traffic classes bandwidth management")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616110633.1449432-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pch_gbe_alloc_tx_buffers() allocates an skb for each TX descriptor and
then passes the returned pointer to skb_reserve(). If netdev_alloc_skb()
fails, skb_reserve() dereferences NULL.
Make pch_gbe_alloc_tx_buffers() return an error when an skb allocation
fails. On failure, let pch_gbe_alloc_tx_buffers() clean the partially
allocated TX ring before returning the error. While bringing the device
up, release the RX buffer pool through a shared cleanup helper before
unwinding the IRQ setup.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Fixes: 77555ee722 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260615125043.3537046-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make @empty have static storage duration (like net/sysctl_net.c does)
to avoid storing a bad pointer, and keep consistent with
__register_sysctl_table @table 'should not be free'd after registration'.
Note that this is _not_ a bug, since size is 0 the pointer will
never get deferenced.
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260616064053.690154-1-guanwentao@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit refactored the prechangeupper event handling but
failed to actually return an error in case
dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper
on a port which tries to join a bridge. Fix this by returning err
instead of 0.
Fixes: 45035febc4 ("net: dpaa2-switch: refactor prechangeupper sanity checks")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260616105430.3725910-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised.
Fixes: 0c71670396 ("virtio-net: fix received length check in big packets")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20260616042837.2249468-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strncpy() has been a persistent source of bugs due to its ambiguous
intended usage and frequently counter-intuitive semantics: it may not
NUL-terminate the destination, and it unconditionally zero-pads to the
full length, which isn't always needed. All former callers have been
migrated[1] to:
- strscpy() for NUL-terminated destinations
- strscpy_pad() for NUL-terminated destinations needing zero-padding
- strtomem_pad() for non-NUL-terminated fixed-width fields
- memcpy_and_pad() for bounded copies with explicit padding
- memcpy() for known-length copies
Remove the generic implementation, its declaration, the FORTIFY_SOURCE
wrapper, and associated tests.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Pull CXL updates from Dave Jiang:
"A collection of CXL fixes and changes, including an update to
MAINTAINERS to add Ming Li as a CXL subsystem reviewer.
There's also a series to introduce devm_cxl_probe_mem() core API in
order to pave the way for CXL type2 device drivers to setup and
retrieve CXL region resource during probe"
* tag 'cxl-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (26 commits)
cxl: Add dummy function for cxl_memdev_attach_region for !CONFIG_CXL_REGION
cxl/region: Introduce devm_cxl_probe_mem()
cxl/memdev: Introduce cxl_class_memdev_type
cxl/memdev: Pin parents for entire memdev lifetime
cxl/region: Resolve region deletion races
cxl/region: Block region delete during region creation
cxl/region: Fill first free targets[] slot during auto-discovery
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
tools/testing/cxl: Resolve auto-region decoder targets like real HW
cxl: Align interleave decode/encode helpers with their callers
cxl/test: Add check after kzalloc() memory in alloc_mock_res()
cxl/test: Unregister cxl_acpi in cxl_test_init() error path
cxl/test: Zero out LSA backing memory to avoid leaking to user
cxl/test: Fix integer overflow in mock LSA bounds checks
cxl/test: Verify cmd->size_in before accessing payload
cxl/port: update reference to removed CONFIG_PROVE_CXL_LOCKING
cxl/region: Avoid variable shadowing in region attach paths
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
cxl/pci: Convert PCIBIOS errors to errno on DVSEC config accesses
cxl/pci: Fix the incorrect check of pci_read_config_word() return
...
strncpy() has no remaining callers in the kernel[1]. Remove the
xtensa-specific inline assembly implementation and __HAVE_ARCH_STRNCPY
define, falling back to the generic version in lib/string.c.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
strncpy() has no remaining callers in the kernel[1]. Remove the
x86-32-specific inline assembly implementation and __HAVE_ARCH_STRNCPY
define, falling back to the generic version in lib/string.c.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
strncpy() has no remaining callers in the kernel[1]. Remove the
powerpc-specific assembly implementation from both the kernel
(arch/powerpc/lib/string.S) and the boot wrapper
(arch/powerpc/boot/string.S), along with the __HAVE_ARCH_STRNCPY
define and declaration, falling back to the generic version in
lib/string.c.
The boot wrapper's strncpy had no callers in arch/powerpc/boot/.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
strncpy() has no remaining callers in the kernel[1]. Remove the
m68k-specific inline assembly implementation and __HAVE_ARCH_STRNCPY
define, falling back to the generic version in lib/string.c.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
strncpy() has no remaining callers in the kernel[1]. Remove the
alpha-specific assembly implementation and __HAVE_ARCH_STRNCPY define,
falling back to the generic version in lib/string.c.
The __stxncpy helper (stxncpy.S/ev6-stxncpy.S) is retained as it is
still used by strncat.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Pull nvdimm/dax updates from Alison Schofield:
- Fix a race condition and a couple of static analysis issues in BTT
- Use sysfs_emit() in preparation for removal of cpumap_print_to_pagebuf()
- Escalate a dev_dbg to dev_err in a resource conflict message
- MAINTAINER file updates
* tag 'libnvdimm-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: nvdimm: Include maintainer profile
MAINTAINERS: Update address for Ira Weiny
MAINTAINERS: Add maintainer info for libnvdimm and DAX
nvdimm: Use sysfs_emit() for cpumask show callback
dax/bus: Upgrade resource conflict message to dev_err() in alloc_dax_region()
nvdimm/btt: Free arenas on btt_init() error paths
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
nvdimm/btt: Handle preemption in BTT lane acquisition
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_directory_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_notify_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_info_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_close_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_ioctl_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_open_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests.
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Zhao Zhang <zzhan461@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the reference to the obsolete kselftest wiki.
The kselftest wiki is marked obsolete and is no longer updated. The last
edit was in 2019, and the information is outdated, referring readers for
support to IRC networks that have not been used for years, and to kernel
versions that are no longer supported.
If there is any relevant information left in the wiki it needs to be
cleaned up and moved into the canonical kselftest documentation here.
Link: https://lore.kernel.org/r/20260115172817.7120-1-bacs@librecast.net
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
Ramcharan Rajpurohit
Cen Zhang
Alice Ryhl
Gary Guo
Linus Torvalds
Daniel Zahka
Doruk Tan Ozturk
Michael Bommarito
Ross Porter
Rongguang Wei
Ido Schimmel
Dawei Feng
Ankit Garg
Maoyi Xie
Breno Leitao
Yun Zhou
Lukasz Raczylo
Wayen Yan
Jakub Kicinski
Cosmin Ratiu
Junrui Luo
Ruoyu Wang
Wentao Guan
Ioana Ciornei
Xiang Mei
Zihan Xi
Kees Cook
Henrique Carvalho
Zhao Zhang
Brett A C Sheffield