[ Upstream commit 43b6bf406c ]
525c9e5a32 introduced pm_runtime support for the i.MX SPI driver. With
this pm_runtime is used to bring up the clocks initially. When CONFIG_PM
is disabled the clocks are no longer enabled and the driver doesn't work
anymore. Fix this by enabling the clocks in the probe function and
telling pm_runtime that the device is active using
pm_runtime_set_active().
Fixes: 525c9e5a32 spi: imx: enable runtime pm support
Tested-by: Christian Eggers <ceggers@arri.de> [tested for !CONFIG_PM only]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20201021104513.21560-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a779d91314 ]
we found that the following race condition exists in
xfrm_alloc_userspi flow:
user thread state_hash_work thread
---- ----
xfrm_alloc_userspi()
__find_acq_core()
/*alloc new xfrm_state:x*/
xfrm_state_alloc()
/*schedule state_hash_work thread*/
xfrm_hash_grow_check() xfrm_hash_resize()
xfrm_alloc_spi /*hold lock*/
x->id.spi = htonl(spi) spin_lock_bh(&net->xfrm.xfrm_state_lock)
/*waiting lock release*/ xfrm_hash_transfer()
spin_lock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi*/
hlist_add_head_rcu(&x->byspi)
spin_unlock_bh(&net->xfrm.xfrm_state_lock)
/*add x into hlist:net->xfrm.state_byspi 2 times*/
hlist_add_head_rcu(&x->byspi)
1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist
in __find_acq_core() on the LHS;
2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state
(include x) into the new bydst hlist and new byspi hlist;
3. user thread on the LHS gets the lock and adds x into the new byspi hlist again.
So the same xfrm_state (x) is added into the same list_hash
(net->xfrm.state_byspi) 2 times that makes the list_hash become
an inifite loop.
To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved
to the back of spin_lock_bh, sothat state_hash_work thread no longer add x
which id.spi is zero into the hash_list.
Fixes: f034b5d4ef ("[XFRM]: Dynamic xfrm_state hash table sizing.")
Signed-off-by: zhuoliang zhang <zhuoliang.zhang@mediatek.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe94612dd ]
As Nicolas noticed in his case, when xfrm_interface module is installed
the standard IP tunnels will break in receiving packets.
This is caused by the IP tunnel handlers with a higher priority in xfrm
interface processing incoming packets by xfrm_input(), which would drop
the packets and return 0 instead when anything wrong happens.
Rather than changing xfrm_input(), this patch is to adjust the priority
for the IP tunnel handlers in xfrm interface, so that the packets would
go to xfrmi's later than the others', as the others' would not drop the
packets when the handlers couldn't process them.
Note that IPCOMP also defines its own IPIP tunnel handler and it calls
xfrm_input() as well, so we must make its priority lower than xfrmi's,
which means having xfrmi loaded would still break IPCOMP. We may seek
another way to fix it in xfrm_input() in the future.
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Fixes: da9bbf0598 ("xfrm: interface: support IPIP and IPIP6 tunnels processing with .cb_handler")
FIxes: d7b360c286 ("xfrm: interface: support IP6IP6 and IP6IP tunnels processing with .cb_handler")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8de15e920d ]
Richard reported a warning which can be reproduced by running the LTP
madvise6 test (cgroup v1 in the non-hierarchical mode should be used):
WARNING: CPU: 0 PID: 12 at mm/page_counter.c:57 page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.9.0-rc7-22-default #77
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812d-rebuilt.opensuse.org 04/01/2014
Workqueue: events drain_local_stock
RIP: 0010:page_counter_uncharge (mm/page_counter.c:57 mm/page_counter.c:50 mm/page_counter.c:156)
Call Trace:
__memcg_kmem_uncharge (mm/memcontrol.c:3022)
drain_obj_stock (./include/linux/rcupdate.h:689 mm/memcontrol.c:3114)
drain_local_stock (mm/memcontrol.c:2255)
process_one_work (./arch/x86/include/asm/jump_label.h:25 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2274)
worker_thread (./include/linux/list.h:282 kernel/workqueue.c:2416)
kthread (kernel/kthread.c:292)
ret_from_fork (arch/x86/entry/entry_64.S:300)
The problem occurs because in the non-hierarchical mode non-root page
counters are not linked to root page counters, so the charge is not
propagated to the root memory cgroup.
After the removal of the original memory cgroup and reparenting of the
object cgroup, the root cgroup might be uncharged by draining a objcg
stock, for example. It leads to an eventual underflow of the charge and
triggers a warning.
Fix it by linking all page counters to corresponding root page counters
in the non-hierarchical mode.
Please note, that in the non-hierarchical mode all objcgs are always
reparented to the root memory cgroup, even if the hierarchy has more
than 1 level. This patch doesn't change it.
The patch also doesn't affect how the hierarchical mode is working,
which is the only sane and truly supported mode now.
Thanks to Richard for reporting, debugging and providing an alternative
version of the fix!
Fixes: bf4f059954 ("mm: memcg/slab: obj_cgroup API")
Reported-by: <ltp@lists.linux.it>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201026231326.3212225-1-guro@fb.com
Debugged-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 949dd0104c upstream.
Remove non-privileged user access to power data contained in
/sys/class/powercap/intel-rapl*/*/energy_uj
Non-privileged users currently have read access to power data and can
use this data to form a security attack. Some privileged
drivers/applications need read access to this data, but don't expose it
to non-privileged users.
For example, thermald uses this data to ensure that power management
works correctly. Thus removing non-privileged access is preferred over
completely disabling this power reporting capability with
CONFIG_INTEL_RAPL=n.
Fixes: 95677a9a38 ("PowerCap: Fix mode for energy counter")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bdb157cde upstream.
As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().
There are three possible ways that this could happen:
- It could be allocated twice on subsequent iterations through the loop,
- or leaked on the success path,
- or on the failure path.
Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.
We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.
This fixes the leak. No other side effects expected.
[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]
Fixes: 375637bc52 ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
kernel/events/core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce70996f7 upstream.
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
(cherry picked from commit c10f6019d0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9226c504e3 upstream.
Since the device is resumed from runtime-suspend in
__device_release_driver() anyway, it is better to do that before
looking for busy managed device links from it to consumers, because
if there are any, device_links_unbind_consumers() will be called
and it will cause the consumer devices' drivers to unbind, so the
consumer devices will be runtime-resumed. In turn, resuming each
consumer device will cause the supplier to be resumed and when the
runtime PM references from the given consumer to it are dropped, it
may be suspended. Then, the runtime-resume of the next consumer
will cause the supplier to resume again and so on.
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes: 9ed9895370 ("driver core: Functional dependencies tracking support")
Cc: All applicable <stable@vger.kernel.org> # All applicable
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6e3666859 upstream.
After commit d12544fb2a ("PM: runtime: Remove link state checks in
rpm_get/put_supplier()") nothing prevents the consumer device's
runtime PM from acquiring additional references to the supplier
device after pm_runtime_clean_up_links() has run (or even while it
is running), so calling this function from __device_release_driver()
may be pointless (or even harmful).
Moreover, it ignores stateless device links, so the runtime PM
handling of managed and stateless device links is inconsistent
because of it, so better get rid of it entirely.
Fixes: d12544fb2a ("PM: runtime: Remove link state checks in rpm_get/put_supplier()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0e398e204 upstream.
While removing a device link, drop the supplier device's runtime PM
usage counter as many times as needed to drop all of the runtime PM
references to it from the consumer in addition to dropping the
consumer's link count.
Fixes: baa8809f60 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 804fc6a293 upstream.
When sending EAPOL frames via NL80211 they are treated as injected
frames in mac80211. Due to commit 1df2bdba52 ("mac80211: never drop
injected frames even if normally not allowed") these injected frames
were not assigned a sta context in the function ieee80211_tx_dequeue,
causing certain wireless network cards to always send EAPOL frames in
plaintext. This may cause compatibility issues with some clients or
APs, which for instance can cause the group key handshake to fail and
in turn would cause the station to get disconnected.
This commit fixes this regression by assigning a sta context in
ieee80211_tx_dequeue to injected frames as well.
Note that sending EAPOL frames in plaintext is not a security issue
since they contain their own encryption and authentication protection.
Cc: stable@vger.kernel.org
Fixes: 1df2bdba52 ("mac80211: never drop injected frames even if normally not allowed")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Tested-by: Christian Hesse <list@eworm.de>
Tested-by: Thomas Deutschmann <whissi@gentoo.org>
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20201019160113.350912-1-Mathy.Vanhoef@kuleuven.be
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa27e2f6c5 upstream.
If we want to send a control status on our own time (through
delayed_status), make sure to handle a case where we may queue the
delayed status before the host requesting for it (when XferNotReady
is generated). Otherwise, the driver won't send anything because it's
not EP0_STATUS_PHASE yet. To resolve this, regardless whether
dwc->ep0state is EP0_STATUS_PHASE, make sure to clear the
dwc->delayed_status flag if dwc3_ep0_send_delayed_status() is called.
The control status can be sent when the host requests it later.
Cc: <stable@vger.kernel.org>
Fixes: d97c78a190 ("usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 985616f045 upstream.
The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.
Fixes: 507ca9bc04 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 912ab37c79 upstream.
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud
rates in both the new and the old termios setting are higher than
uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered.
Passing NULL as the old termios so uart_get_baud_rate() will use
uartclk / 16 - 1 as the new baud rate which will be replaced by the
original baud rate later by tty_termios_encode_baud_rate() in
mtk8250_set_termios().
Fixes: 551e553f0d ("serial: 8250_mtk: Fix high-speed baud rates clamping")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29daf869cb upstream.
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.
Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.
Fixes: d069cb4373 ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes: 5f356497c3 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes: e0a8e0d90a ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes: 5b2753fc3e ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes: a891c43b97 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b35047eb4 upstream.
When both the paes and the pkey kernel module are statically build
into the kernel, the paes cipher selftests run before the pkey
kernel module is initialized. So a static variable set in the pkey
init function and used in the pkey_clr2protkey function is not
initialized when the paes cipher's selftests request to call pckmo for
transforming a clear key value into a protected key.
This patch moves the initial setup of the static variable into
the function pck_clr2protkey. So it's possible, to use the function
for transforming a clear to a protected key even before the pkey
init function has been called and the paes selftests may run
successful.
Reported-by: Alexander Egorenkov <Alexander.Egorenkov@ibm.com>
Cc: <stable@vger.kernel.org> # 4.20
Fixes: f822ad2c2c ("s390/pkey: move pckmo subfunction available checks away from module init")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0e98aa9c4 upstream.
pmd/pud_deref() assume that they will never operate on large pmd/pud
entries, and therefore only use the non-large _xxx_ENTRY_ORIGIN mask.
With commit 9ec8fa8dc3 ("s390/vmemmap: extend modify_pagetable()
to handle vmemmap"), that assumption is no longer true, at least for
pmd_deref().
In theory, we could end up with wrong addresses because some of the
non-address bits of a large entry would not be masked out.
In practice, this does not (yet) show any impact, because vmemmap_free()
is currently never used for s390.
Fix pmd/pud_deref() to check for the entry type and use the
_xxx_ENTRY_ORIGIN_LARGE mask for large entries.
While at it, also move pmd/pud_pfn() around, in order to avoid code
duplication, because they do the same thing.
Fixes: 9ec8fa8dc3 ("s390/vmemmap: extend modify_pagetable() to handle vmemmap")
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b2ca2c7d0 upstream.
Under some circumstances in particular with "Reconfigure I/O Path"
a zPCI function may first appear in Standby through a PCI event with
PEC 0x0302 which initially makes it visible to the zPCI subsystem,
Only after that is it configured with a zPCI event with PEC 0x0301.
If the zbus is still missing a PCI function zero (devfn == 0) when the
PCI event 0x0301 is handled zdev->zbus->bus is still NULL and gets
dereferenced in common code.
Check for this case and enable but don't scan the zPCI function.
This matches what would happen if we immediately got the 0x0301
configuration request or the function was included in CLP List PCI.
In all cases the PCI functions with devfn != 0 will be scanned once
function 0 appears.
Fixes: 3047766bc6 ("s390/pci: fix enabling a reserved PCI function")
Cc: <stable@vger.kernel.org> # 5.8
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d820f68b2 upstream.
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes: a5497bab5f ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87y2jhl19s.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c4e0dff20 upstream.
It's buggy:
On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.
Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016
Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken
https://github.com/systemd/systemd/pull/3651
So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.
Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.
Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:
/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);
Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.
v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce3d31ad3c ]
The call to rcu_cpu_starting() in secondary_start_kernel() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows:
WARNING: suspicious RCU usage
-----------------------------
kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
Call trace:
dump_backtrace+0x0/0x3c8
show_stack+0x14/0x60
dump_stack+0x14c/0x1c4
lockdep_rcu_suspicious+0x134/0x14c
__lock_acquire+0x1c30/0x2600
lock_acquire+0x274/0xc48
_raw_spin_lock+0xc8/0x140
vprintk_emit+0x90/0x3d0
vprintk_default+0x34/0x40
vprintk_func+0x378/0x590
printk+0xa8/0xd4
__cpuinfo_store_cpu+0x71c/0x868
cpuinfo_store_cpu+0x2c/0xc8
secondary_start_kernel+0x244/0x318
This is avoided by moving the call to rcu_cpu_starting up near the
beginning of the secondary_start_kernel() function.
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/
Link: https://lore.kernel.org/r/20201028182614.13655-1-cai@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 925681454d ]
we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa736f5a6 ]
The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fca3f0628 ]
The code:
trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size)
| TRB_LEN(length));
TRB_BURST_LEN(priv_ep->trb_burst_size) may be overflow for int 32 if
priv_ep->trb_burst_size is equal or larger than 0x80;
Below is the Coverity warning:
sign_extension: Suspicious implicit sign extension: priv_ep->trb_burst_size
with type u8 (8 bits, unsigned) is promoted in priv_ep->trb_burst_size << 24
to type int (32 bits, signed), then sign-extended to type unsigned long
(64 bits, unsigned). If priv_ep->trb_burst_size << 24 is greater than 0x7FFFFFFF,
the upper bits of the result will all be 1.
To fix it, it needs to add an explicit cast to unsigned int type for ((p) << 24).
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sascha Hauer
Srinivas Kandagatla
zhuoliang zhang
Olaf Hering
Marc Zyngier
Tomasz Figa
Xin Long
Santosh Shukla
Ming Lei
Roman Gushchin
Chris Wilson
Greg Kroah-Hartman
Len Brown
kiyin(尹亮)
Imre Deak
Rafael J. Wysocki
Vineet Gupta
Boris Brezillon
Mathy Vanhoef
Pavel Begunkov
Macpaul Lin
Alan Stern
Thinh Nguyen
Daniele Palmas
Ziyi Cao
Johan Hovold
Qinglang Miao
Claire Chang
Christophe Leroy
Harald Freudenberger
Gerald Schaefer
Niklas Schnelle
Thomas Gleixner
Eddy Wu
Matthias Reichl
Lucas Stach
Daniel Vetter
Qian Cai
Karol Herbst
Ralph Campbell
Peter Chen
Zhang Qilong
Hoegeun Kwon