[ Upstream commit 8c522da70f ]
mdss_gdsc can get stuck on boot due to RCGs being left on from last boot.
As a fix, commit 01a0a6cc8c ("clk: qcom: Park shared RCGs upon
registration") introduced a callback to ensure the RCG is off upon init.
However, the fix depends on all shared RCGs being marked as such in code.
For SM8150/SC8180X/SM8250 the MDSS vsync clock was using regular ops,
unlike the same clock in the SC7180 code. This was causing display to
frequently fail to initialize after rebooting on the Surface Pro X.
Fix by using shared ops for this clock.
Fixes: 80a18f4a85 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312112321.370983-8-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb92c78b4 ]
As the PCIe host controller driver does not yet support dealing with the
loss of state during suspend, use retention for relevant GDSCs.
This fixes the link not surviving upon resume:
nvme 0002:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS read failed (134)
nvme 0002:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
nvme nvme0: Disabling device after reset failure: -19
Fixes: 4433594bbe ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20260312112321.370983-5-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25bc96f26c ]
The USB subsystem does not expect to lose its state on suspend:
xhci-hcd xhci-hcd.0.auto: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
(The reinitialization usually succeeds, but it does slow down resume.)
To maintain state during suspend, the relevant GDSCs need to stay in
retention mode, like they do on other similar SoCs. Change the mode to
PWRSTS_RET_ON to fix.
Fixes: 4433594bbe ("clk: qcom: gcc: Add global clock controller driver for SC8180x")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260312112321.370983-4-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b151a6307 ]
The four byte_div_clk_src dividers (disp{0,1}_cc_mdss_byte{0,1}_div_clk_src)
had CLK_SET_RATE_PARENT set. When the DSI driver calls clk_set_rate() on
byte_intf_clk, the rate-change propagates through the divider up to the
parent PLL (byte_clk_src), halving the byte clock rate.
A simiar issue had been also encountered on SM8750.
b8501febdc ("clk: qcom: dispcc-sm8750: Drop incorrect CLK_SET_RATE_PARENT on byte intf parent").
Likewise, remove CLK_SET_RATE_PARENT from all four byte divider clocks
so that clk_set_rate() on the divider adjusts only the divider ratio,
leaving the parent PLL untouched.
Fixes: 4a66e76fdb ("clk: qcom: Add SC8280XP display clock controller")
Signed-off-by: White Lewis <liu224806@gmail.com>
[pengyu: reword]
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260303115550.9279-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06a310b45 ]
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size.
Fixes: 6460e75a10 ("[SCSI] sg: fixes for large page_size")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260127062044.3034148-3-yangerkun@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ed3d14fc4 ]
These attributes are evaluated as c-string (passed to strcmp), but
NLA_STRING doesn't check for the presence of a \0 terminator.
Either this needs to switch to nla_strcmp() and needs to adjust printf fmt
specifier to not use plain %s, or this needs to use NLA_NUL_STRING.
As the code has been this way for long time, it seems to me that userspace
does include the terminating nul, even tough its not enforced so far, and
thus NLA_NUL_STRING use is the simpler solution.
Fixes: 30dc5e63d6 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Link: https://patch.msgid.link/r/20260330122742.13315-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c34471c26 ]
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260408084501.1-dell-wmi-sysman-v2-pengpeng@iscas.ac.cn
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6cd43fe9b ]
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f83c8dda45 ]
Clang compiler is not happy about set but unused variable
(when dprintk() is no-op):
.../blocklayout/blocklayout.c:384:9: error: variable 'count' set but not used [-Werror,-Wunused-but-set-variable]
Remove a leftover from the previous cleanup.
Fixes: 3a6fd1f004 ("pnfs/blocklayout: remove read-modify-write handling in bl_write_pagelist")
Acked-by: Anna Schumaker <anna.schumkaer@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8baeff2c1d ]
An ACPI notify handler is leaked if device_create_file() returns an
error in acpi_pcc_hotkey_add().
Also, it is pointless to call pcc_unregister_optd_notifier() in
acpi_pcc_hotkey_remove() if pcc->platform is NULL and it is better
to arrange the cleanup code in that function in the same order as
the rollback code in acpi_pcc_hotkey_add().
Address the above by placing the pcc_register_optd_notifier() call in
acpi_pcc_hotkey_add() after the device_create_file() return value
check and placing the pcc_unregister_optd_notifier() call in
acpi_pcc_hotkey_remove() right before the device_remove_file() call.
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2411055.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2a880e802 ]
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops.
Fixes: 44a01d5ba8 ("[S390] s390/hvc_console: z/VM IUCV hypervisor console support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260130072939.1535869-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 797cc011ae ]
The devm_gpiod_get_optional() function may return an ERR_PTR in case of
genuine GPIO acquisition errors, not just NULL which indicates the
legitimate absence of an optional GPIO.
Add an IS_ERR() check after the call in sky81452_bl_parse_dt(). On
error, return the error code to ensure proper failure handling rather
than proceeding with invalid pointers.
Fixes: e1915eec54 ("backlight: sky81452: Convert to GPIO descriptors")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260203021625.578678-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d35a6db887 ]
In DMA mode, the IBI status descriptor encodes the payload using
CHUNKS (number of chunks) and DATA_LENGTH (valid bytes in the last
chunk). All preceding chunks are implicitly full-sized.
The current code accumulates full chunk sizes for non-final status
descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full
chunks described by the same final status entry.
As a result, the computed IBI payload length is truncated whenever
the final status spans multiple chunks. For example, with a chunk
size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total
payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks
plus DATA_LENGTH for the last chunk.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260407-i3c-hci-dma-v2-1-a583187b9d22@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cce1b9c8 ]
In fef2a73516 ("perf tools: Kill die()") the die() function was
removed, but not the prototype in util.h, now when building with
LIBPERL=1, during a 'make -C tools/perf build-test' routine test, it is
failing as perl likes die() calls and then this clashes with this
remnant, remove it.
Fixes: fef2a73516 ("perf tools: Kill die()")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9c99b7b70 ]
Long-running tests indicate that this logging can occasionally disrupt
timing and lead to request/response corruption.
Irq handler need to be executed as fast as possible,
most I2C slave IRQ implementations are byte-level, logging here
can significantly affect transfer behavior and timing. It is recommended
to use dev_dbg() for these messages.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403090603.3988423-4-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea641be7a4 ]
copy_to_user() returns the number of bytes that could not be copied,
with a non-zero value indicating a partial or complete failure. The
current code only checks for negative return values and treats all
non-negative results as success.
Treating any positive return value from copy_to_user() as
an error and returning -EFAULT.
Fixes: dd2bc5cc9e ("ipmi: ssif_bmc: Add SSIF BMC driver")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Message-ID: <20260403090603.3988423-2-zhangjian.3032@bytedance.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a61fd866e ]
expr__find_ids() propagates the parser return value directly. For syntax
errors, the parser can return a positive value, but callers treat it as
success, e.g., for below case on Arm64 platform:
metric expr 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES) for backend_bound
parsing metric: 100 * (STALL_SLOT_BACKEND / (CPU_CYCLES * #slots) - BR_MIS_PRED * 3 / CPU_CYCLES)
Failure to read '#slots' literal: #slots = nan
syntax error
Convert positive parser returns in expr__find_ids() to -EINVAL, as a
result, the error value will be respected by callers.
Before:
perf stat -C 5
Failure to read '#slots'Failure to read '#slots'Failure to read '#slots'Failure to read '#slots'Segmentation fault
After:
perf stat -C 5
Failure to read '#slots'Cannot find metric or group `Default'
Fixes: ded80bda8b ("perf expr: Migrate expr ids table to a hashmap")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfaade34b5 ]
The value is a void* and the address of an int, max_stack_depth, is
set up in the perf lock options. The parse_max_stack function treats
the int* as a long*, make this more correct by declaring the value to
be an int*.
Fixes: 0a277b6226 ("perf lock contention: Check --max-stack option")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34006f7789 ]
The argument variable is assigned the return value of
pinconf_to_config_argument(), which returns a u32. Change its type from
enum pin_config_param to unsigned int to correctly store the configuration
argument.
Fixes: 03b054e969 ("pinctrl: Pass all configs to driver on pin_config_set()")
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c478e7b3e ]
Building perf with CORESIGHT=1 and the optional CSTRACE_RAW=1 enables
additional debug printing of raw trace data when using command:-
perf report --dump.
This raw trace prints the CoreSight formatted trace frames, which may be
used to investigate suspected issues with trace quality / corruption /
decode.
These frames are not present in ETE + TRBE trace.
This fix removes the unnecessary call to print these frames.
This fix also rationalises implementation - original code had helper
function that unnecessarily repeated initialisation calls that had
already been made.
Due to an addtional fault with the OpenCSD library, this call when ETE/TRBE
are being decoded will cause a segfault in perf. This fix also prevents
that problem for perf using older (<= 1.8.0 version) OpenCSD libraries.
Fixes: 68ffe39028 ("perf tools: Add decoder mechanic to support dumping trace data")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Mike Leach <mike.leach@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c969a9d7bb ]
If the entry is NULL the value is meaningless so early return NULL to
avoid an increment of NULL. This was happening in calls from
has_stitched_lbr when running the "perf record LBR tests". The return
value isn't used in that case, so returning NULL as no effect.
Fixes: 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 970dacb3b9 ]
The pin control core is covered to report any error via message.
The devm_request_threaded_irq() already prints an error message.
Remove the duplicates.
While at it, drop the info message as the same information about
an IRQ in use can be retrieved differently.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Stable-dep-of: 5ad32c3607 ("pinctrl: cy8c95x0: Avoid returning positive values to user space")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe5560688f ]
Fix three possible resource leaks by using the devres version of
clk_prepare_enable(). Also, update error message accordingly.
Detected by Smatch:
drivers/pinctrl/pinctrl-pic32.c:2211 pic32_pinctrl_probe() warn:
'pctl->clk' from clk_prepare_enable() not released on lines: 2208.
drivers/pinctrl/pinctrl-pic32.c:2274 pic32_gpio_probe() warn:
'bank->clk' from clk_prepare_enable() not released on lines: 2264,2272.
Fixes: 2ba384e6c3 ("pinctrl: pinctrl-pic32: Add PIC32 pin control driver")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d486445a ]
The ARM32 BPF JIT does not support BPF-to-BPF function calls
(BPF_PSEUDO_CALL) or callbacks (BPF_PSEUDO_FUNC), but it does
not reject them either.
When a program with subprograms is loaded (e.g. libxdp's XDP
dispatcher uses __noinline__ subprograms, or any program using
callbacks like bpf_loop or bpf_for_each_map_elem), the verifier
invokes bpf_jit_subprogs() which calls bpf_int_jit_compile()
for each subprogram.
For BPF_PSEUDO_CALL, since ARM32 does not reject it, the JIT
silently emits code using the wrong address computation:
func = __bpf_call_base + imm
where imm is a pc-relative subprogram offset, producing a bogus
function pointer.
For BPF_PSEUDO_FUNC, the ldimm64 handler ignores src_reg and
loads the immediate as a normal 64-bit value without error.
In both cases, build_body() reports success and a JIT image is
allocated. ARM32 lacks the jit_data/extra_pass mechanism needed
for the second JIT pass in bpf_jit_subprogs(). On the second
pass, bpf_int_jit_compile() performs a full fresh compilation,
allocating a new JIT binary and overwriting prog->bpf_func. The
first allocation is never freed. bpf_jit_subprogs() then detects
the function pointer changed and aborts with -ENOTSUPP, but the
original JIT binary has already been leaked. Each program
load/unload cycle leaks one JIT binary allocation, as reported
by kmemleak:
unreferenced object 0xbf0a1000 (size 4096):
backtrace:
bpf_jit_binary_alloc+0x64/0xfc
bpf_int_jit_compile+0x14c/0x348
bpf_jit_subprogs+0x4fc/0xa60
Fix this by rejecting both BPF_PSEUDO_CALL in the BPF_CALL
handler and BPF_PSEUDO_FUNC in the BPF_LD_IMM64 handler, falling
through to the existing 'notyet' path. This causes build_body()
to fail before any JIT binary is allocated, so
bpf_int_jit_compile() returns the original program unjitted.
bpf_jit_subprogs() then sees !prog->jited and cleanly falls
back to the interpreter with no leak.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: Jonas Rebmann <jre@pengutronix.de>
Closes: https://lore.kernel.org/bpf/b63e9174-7a3d-4e22-8294-16df07a4af89@pengutronix.de
Tested-by: Jonas Rebmann <jre@pengutronix.de>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260417143353.838911-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b960430ea8 ]
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5f635edd3 ]
Fix an operator precedence issue in convert_bpf_ld_abs() where the
expression offset + ip_align % size evaluates as offset + (ip_align % size)
due to % having higher precedence than +. That latter evaluation does
not make any sense. The intended check is (offset + ip_align) % size == 0
to verify that the packet load offset is properly aligned for direct
access.
With NET_IP_ALIGN == 2, the bug causes the inline fast-path for direct
packet loads to almost never be taken on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
platforms. This forces nearly all cBPF BPF_LD_ABS packet loads through
the bpf_skb_load_helper slow path on the affected archs.
Fixes: e0cea7ce98 ("bpf: implement ld_abs/ld_ind in native bpf")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260416122719.661033-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca38b7734 ]
unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state,
TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`).
sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that
socket is properly set up, which would include having a defined peer. IOW,
there's a window when unix_stream_bpf_update_proto() can be called on
socket which still has unix_peer(sk) == NULL.
CPU0 bpf CPU1 connect
-------- ------------
WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)
sock_map_sk_state_allowed(sk)
...
sk_pair = unix_peer(sk)
sock_hold(sk_pair)
sock_hold(newsk)
smp_mb__after_atomic()
unix_peer(sk) = newsk
BUG: kernel NULL pointer dereference, address: 0000000000000080
RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0
Call Trace:
sock_map_link+0x564/0x8b0
sock_map_update_common+0x6e/0x340
sock_map_update_elem_sys+0x17d/0x240
__sys_bpf+0x26db/0x3250
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x6b/0x3a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Initial idea was to move peer assignment _before_ the sk_state update[1],
but that involved an additional memory barrier, and changing the hot path
was rejected.
Then a NULL check during proto update in unix_stream_bpf_update_proto() was
considered[2], but the follow-up discussion[3] focused on the root cause,
i.e. sockmap update taking a wrong lock. Or, more specifically, missing
unix_state_lock()[4].
In the end it was concluded that teaching sockmap about the af_unix locking
would be unnecessarily complex[5].
Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT
are allowed to update sockmaps, sock_map_update_elem() taking the unix
lock, as it is currently implemented in unix_state_lock():
spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken
in a process context, followed by a softirq-context TC BPF program
attempting to take the same spinlock -- deadlock[6].
This way we circled back to the peer check idea[2].
[1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/
[2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/
[3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/
[4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/
[5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/
[6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/
Summary of scenarios where af_unix/stream connect() may race a sockmap
update:
1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys()
Implemented NULL check is sufficient. Once assigned, socket peer won't
be released until socket fd is released. And that's not an issue because
sock_map_update_elem_sys() bumps fd refcnf.
2. connect() vs BPF program doing update
Update restricted per verifier.c:may_update_sockmap() to
BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER
BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only)
BPF_PROG_TYPE_SOCKET_FILTER
BPF_PROG_TYPE_SCHED_CLS
BPF_PROG_TYPE_SCHED_ACT
BPF_PROG_TYPE_XDP
BPF_PROG_TYPE_SK_REUSEPORT
BPF_PROG_TYPE_FLOW_DISSECTOR
BPF_PROG_TYPE_SK_LOOKUP
Plus one more race to consider:
CPU0 bpf CPU1 connect
-------- ------------
WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)
sock_map_sk_state_allowed(sk)
sock_hold(newsk)
smp_mb__after_atomic()
unix_peer(sk) = newsk
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
CPU1 close
----------
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
// use after free?
sock_hold(sk_pair)
2.1 BPF program invoking helper function bpf_sock_map_update() ->
BPF_CALL_4(bpf_sock_map_update(), ...)
Helper limited to BPF_PROG_TYPE_SOCK_OPS. Nevertheless, a unix sock
might be accessible via bpf_map_lookup_elem(). Which implies sk
already having psock, which in turn implies sk already having
sk_pair. Since sk_psock_destroy() is queued as RCU work, sk_pair
won't go away while BPF executes the update.
2.2 BPF program invoking helper function bpf_map_update_elem() ->
sock_map_update_elem()
2.2.1 Unix sock accessible to BPF prog only via sockmap lookup in
BPF_PROG_TYPE_SOCKET_FILTER, BPF_PROG_TYPE_SCHED_CLS,
BPF_PROG_TYPE_SCHED_ACT, BPF_PROG_TYPE_XDP,
BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR,
BPF_PROG_TYPE_SK_LOOKUP.
Pretty much the same as case 2.1.
2.2.2 Unix sock accessible to BPF program directly:
BPF_PROG_TYPE_TRACING, narrowed down to BPF_TRACE_ITER.
Sockmap iterator (sock_map_seq_ops) is safe: unix sock
residing in a sockmap means that the sock already went through
the proto update step.
Unix sock iterator (bpf_iter_unix_seq_ops), on the other hand,
gives access to socks that may still be unconnected. Which
means iterator prog can race sockmap/proto update against
connect().
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x253/0x4d0
Write of size 4 at addr 0000000000000080 by task test_progs/3140
Call Trace:
dump_stack_lvl+0x5d/0x80
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x253/0x4d0
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
While the introduced NULL check prevents null-ptr-deref in the
BPF program path as well, it is insufficient to guard against
a poorly timed close() leading to a use-after-free. This will
be addressed in a subsequent patch.
Fixes: c63829182c ("af_unix: Implement ->psock_update_sk_prot()")
Closes: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/
Reported-by: Michal Luczaj <mhal@rbox.co>
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-4-2af6fe97918e@rbox.co
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio
Geert Uytterhoeven
Arnd Bergmann
Sebastian Krzyszkowiak
Felix Gu
Val Packett
Junrui Luo
White Lewis
Yang Erkun
Ricardo B. Marliere
Dmitry Baryshkov
Florian Westphal
Pengpeng Hou
Fedor Pchelkin
Andy Shevchenko
Abdun Nihaal
Rafael J. Wysocki
Randy Dunlap
Chen Ni
Nuno Sa
Billy Tsai
Arnaldo Carvalho de Melo
Jian Zhang
Leo Yan
Ian Rogers
Yu-Chun Lin
Mike Leach
Ethan Tidmore
Puranjay Mohan
Yihan Ding
Mykyta Yatsenko
Daniel Borkmann
Michal Luczaj