commit ae24f6b06e upstream.
The sve_save_state() and sve_load_state() functions take a 32-bit int
argument that describes whether to save/restore the FFR. Their assembly
implementations consume the entire 64-bit register containing this
32-bit value, and will attempt to save/restore the FFR if any bit of
that 64-bit register is non-zero.
Per the AAPCS64 parameter passing rules, the callee is responsible for
any necessary widening, and the upper 32-bits are permitted to contain
arbitrary values. If the upper 32 bits are non-zero, this could result
in an unexpected attempt to save/restore the FFR, and consequently could
lead to unexpected traps/undefs/faults.
In practice compilers are very unlikely to generate code where the upper
32-bits would be non-zero, but they are permitted to do so.
Fix this by only consuming the low 32 bits of the register, and update
comments accordingly.
The hyp code __sve_save_state() and __sve_restore_state() functions
don't have the same latent bug as they override the full 64-bit register
containing the argument.
Fixes: 9f58486657 ("arm64/sve: Make access to FFR optional")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9406f6012b upstream.
ife decode may return after making only the outer IFE header and
metadata pullable. The caller then passes the decapsulated packet to
eth_type_trans(), which expects the inner Ethernet header to be
accessible from the linear data area.
With a malformed IFE frame, the inner Ethernet header may still be
shorter than ETH_HLEN in the linear area, which can lead to a crash in
the original code.
Fix this by extending the pull check in ife_decode() so that the inner
Ethernet header is also guaranteed to be pullable before returning.
Fixes: ef6980b6be ("introduce IFE action")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/20260610183814.1648888-2-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2005486977 upstream.
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c942 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN.
Fixes: ad9d24c942 ("net: qrtr: fix OOB Read in qrtr_endpoint_post")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260611125455.2352279-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8468dd79cf upstream.
sof_parse_token_sets() reads array->size while iterating over topology
private data. The loop condition only checks that some data remains, so a
malformed topology with a truncated trailing vendor array can make the
parser read the size field before a full vendor-array header is available.
Validate that the remaining private data contains a complete
snd_soc_tplg_vendor_array header before reading array->size.
The declared array size check also needs to remain signed. asize is an int,
but sizeof(*array) has type size_t, so comparing them directly promotes
negative asize values to unsigned and lets them pass the check,
as reported in the stable review thread reference below.
Cast sizeof(*array) to int when validating the declared array size. This
rejects negative, zero and otherwise too-small sizes before the parser
dispatches to the tuple-specific code.
Link: https://lore.kernel.org/stable/CANiDSCsjR5NHqu_Ui5cOqWdJgFqmYsQ9WR8O7m0WOhngaYXFpw@mail.gmail.com/t/#m9b3be379221e79327cc13fd71009287368ef4f23
Fixes: 215e5fe758 ("ASoC: SOF: topology: reject invalid vendor array size in token parser")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260603-sof-topology-array-size-signed-v1-1-84f97879a4ef@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f97760417 upstream.
In sof_ipc3_bytes_put(), the size used for the memcpy is derived from
the old data->size already in the buffer, not the incoming new data's
size field. If the new data has a different size, the copy length is
wrong: it may truncate valid data or copy stale bytes.
Similarly, sof_ipc3_bytes_get() checks data->size against max_size
without accounting for the sizeof(struct sof_ipc_ctrl_data) offset
of the flex array within the allocation.
Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size
from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata)
from the bounds check to match the actual available space.
Fixes: 544ac8858f ("ASoC: SOF: Add bytes_get/put control IPC ops for IPC3")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21cf8dc478 upstream.
When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs,
the error rollback loop does not correctly revert the preceding
replacements. The loop decrements the index but fails to update the
vr pointer, which still points to the VR that caused the failure. As
a result, the condition and the rollback call always operate on the
same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple
times on it while never rolling back the earlier VRs. Those VRs
continue to hold a reference to new_tree acquired via
mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree.
Fix by reinitializing vr inside the error loop with the updated index:
vr = &mlxsw_sp->router->vrs[i];
so that the loop correctly iterates over all VRs that were actually
replaced.
Cc: stable@vger.kernel.org
Fixes: fc922bb0dd ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609084730.215732-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41c8c1d65b upstream.
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely.
Cc: stable@vger.kernel.org
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609083709.209743-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4f27ad055 ]
smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload
before copying it to userspace.
The payload offset and length both come from 32-bit fields. The bounds
check currently adds OutputOffset and qi.input_buffer_length directly, so
the addition can wrap in 32-bit arithmetic before the result is compared
against the response buffer length.
A malicious server can use a large OutputOffset and a small OutputCount
to make the wrapped sum pass the bounds check. The later copy_to_user()
then reads from io_rsp + OutputOffset, outside the response buffer.
Use size_add() for the offset plus length check so overflow is treated as
out of bounds.
Fixes: 2b1116bbe8 ("CIFS: Use common error handling code in smb2_ioctl_query_info()")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fabb881df3 ]
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules.
Fixes: 967db3529e ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Link: https://patch.msgid.link/20260702045616.3002773-2-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c914307e1d ]
mlx5_tun_entropy_refcount_inc() counts both VXLAN and L2-to-L3
tunnel reformat entries as entropy-enabling users. The matching
decrement path only handled VXLAN, leaving L2-to-L3 tunnel entries
counted after release.
Handle MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL in
mlx5_tun_entropy_refcount_dec() as well so the enabling entry
refcount remains balanced.
Fixes: f828ca6a2f ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260703141423.1723-1-lirongqing@baidu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ef35efbb ]
In tcp_mmap.c, both child_thread() and main() allocate an EVP_MD_CTX
via EVP_MD_CTX_new() when integrity checking is enabled, but neither
function releases the context. child_thread() misses the free in its
common cleanup block, and main() returns without freeing the context.
This results in a SHA256 context leak on every run that uses the
‑i (integrity) option. Add the missing EVP_MD_CTX_free() calls to
the appropriate cleanup paths to fix the leak.
Fixes: 5c5945dc69 ("selftests/net: Add SHA256 computation over data sent in tcp_mmap")
Signed-off-by: Wang Yan <wangyan01@kylinos.cn>
Link: https://patch.msgid.link/20260702025949.442523-1-wangyan01@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d38f8bd771 ]
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code.
Fixes: cba6cfdc7c ("regulator: core: Avoid lockdep reports when resolving supplies")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260708235722.2953579-1-ttabi@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ae672606c ]
metadata_open() returns NULL when kzalloc_obj() fails, but the
caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL)
returns false, the NULL pointer is treated as a valid result
and later assigned to era->md, leading to a NULL pointer
dereference when the metadata is accessed.
Fix this by returning ERR_PTR(-ENOMEM) on allocation failure,
consistent with dm-cache-metadata.c, dm-thin-metadata.c, and
dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the
same pattern.
Fixes: eec40579d8 ("dm: add era target")
Signed-off-by: Cao Guanghui <caoguanghui@kylinos.cn>
Reviewed-by: Su Yue <glass.su@suse.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46bc86c833 ]
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction.
Reported-by: Michael Nemanov <michael.nemanov@vastdata.com>
Closes: https://lore.kernel.org/linux-nfs/40e3d522-dfcf-4fc1-9c55-b5e81f1536d5@vastdata.com/
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michael Nemanov <michael.nemanov@vastdata.com>
Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29bacb096d ]
xs_tcp_tls_setup_socket() creates a temporary "lower" rpc_clnt with
rpc_create() to drive the inner TLS handshake, then waits for
XPRT_LOCKED on its xprt with TASK_KILLABLE so a stuck handshake can
be aborted by signal. When the wait is interrupted, the function
jumps to out_unlock without releasing lower_clnt. The success path
and the out_close error path both call
rpc_shutdown_client(lower_clnt); only the killed-wait path skips it,
leaking the clnt and its underlying xprt.
Call rpc_shutdown_client() on this path before joining out_unlock.
xprt_release_write() is not needed here because XPRT_LOCKED was
never acquired.
Fixes: 26e8bfa30d ("SUNRPC/TLS: Lock the lower_xprt during the tls handshake")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michael Nemanov <michael.nemanov@vastdata.com>
Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 027a84ac6b ]
parse_dfs_referrals() validates that the response header and referral
array fit in the received buffer, but each referral also contains string
offsets supplied by the server.
Those offsets are used to compute the DfsPath and NetworkAddress string
pointers without checking whether they still point inside the response
buffer. A malformed referral can therefore make the computed pointer
exceed the end of the buffer. The resulting negative max_len is then
passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it
to kstrndup() as a size_t, allowing strnlen() to read out of bounds.
Validate each string offset before deriving the string pointer.
Fixes: 4ecce920e1 ("CIFS: move DFS response parsing out of SMB1 code")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 575f87b9d4 ]
The files has no real user because CEX2 and CEX3 device drivers
are removed, also remove these empty files.
Fixes: 5ac8c72462 ("s390/zcrypt: remove CEX2 and CEX3 device drivers")
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f7a535ff0 ]
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers.
Fixes: f2edb9f770 ("ipvs: implement passive PMTUD for IPIP packets")
Link: https://sashiko.dev/#/patchset/20260702073430.67680-1-zhaoyz24%40mails.tsinghua.edu.cn
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b335af0d0 ]
When an ICMP Fragmentation Needed error is received for a tunneled IPVS
connection, ip_vs_in_icmp() recomputes the MTU that the original packet
can use by subtracting the tunnel overhead from the reported next-hop
MTU.
The current code always subtracts sizeof(struct iphdr), which is only
the IPIP overhead. For GUE and GRE tunnels, ipvs_udp_decap() and
ipvs_gre_decap() already compute the additional tunnel header length,
but that value is scoped to the decapsulation block and is lost before
the ICMP_FRAG_NEEDED handling. As a result, the ICMP error sent back to
the client advertises an MTU that is too large, so PMTUD can fail to
converge for GUE/GRE-tunneled real servers.
With a reported next-hop MTU of 1400, a GUE tunnel currently returns
1380 to the client. The correct value is 1368:
1400 - sizeof(struct iphdr) - sizeof(struct udphdr) -
sizeof(struct guehdr)
Hoist the tunnel header length into the main ip_vs_in_icmp() scope and
subtract sizeof(struct iphdr) + ulen in the Fragmentation Needed path.
The IPIP path keeps ulen as 0, so its existing 1400 - 20 = 1380 result
is unchanged.
Fixes: 508f744c0d ("ipvs: strip udp tunnel headers from icmp errors")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude-Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 3f7a535ff0 ("ipvs: ensure inner headers in ICMP errors are in headroom")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2500fa3958 ]
TCP state handling reparses the skb to find the TCP header. For IPv6 it
uses sizeof(struct ipv6hdr), while the surrounding IPVS code already
parsed the packet with ip_vs_fill_iph_skb() and has the real
transport-header offset in iph.len.
This makes TCP state handling look at the wrong bytes when an IPv6
packet carries extension headers. Use the parsed transport offset passed
down from ip_vs_set_state() when reading the TCP header.
For IPv4 and for IPv6 packets without extension headers, the passed
offset matches the previous value.
Fixes: 0bbdd42b7e ("IPVS: Extend protocol DNAT/SNAT and state handlers")
Link: https://lore.kernel.org/netdev/20260705125659.37744-1-zhaoyz24@mails.tsinghua.edu.cn/
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: Claude Code:GLM-5.2
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae7ce7baf ]
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 2500fa3958 ("ipvs: use parsed transport offset in TCP state lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b26518b68 ]
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 818ae1a5ec ]
Commit 63ed8de4be ("mld: add mc_lock for protecting per-interface
mld data") added the same comments regarding locking to many functions.
Let's replace the comments with lockdep annotation, which is more helpful.
Note that we just remove the comment for mld_clear_zeros() and
mld_send_cr(), where mc_dereference() is used in the entry of the
function.
While at it, a comment for __ipv6_sock_mc_join() is moved back to the
correct place.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 9b26518b68 ("ipv6: mcast: Fix potential UAF in MLD delayed work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b19c0f81e ]
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 235acadd31 ]
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf ("octeontx2-pf: Add support for SR-IOV management functions")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f97cae7e ]
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments.
Fixes: a729b7f0bd ("sch_cake: Add overhead compensation support to the rate shaper")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260702000758.297407.e5c888d9d99d.cake-overhead-underflow@trailofbits.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60444706aa ]
The hardware VLAN filter (RFE_CTL_VLAN_FILTER_) drops VLAN-tagged frames
whose VID has not been registered via lan78xx_vlan_rx_add_vid(). It is
left enabled in promiscuous mode, so packet capture (e.g. tcpdump or
Wireshark) does not see tagged frames for unregistered VIDs.
Clear the filter while the interface is promiscuous and restore it from
NETIF_F_HW_VLAN_CTAG_FILTER otherwise. Enforce the same condition in
lan78xx_set_features() so netdev_update_features() cannot re-enable the
filter while promiscuous.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Enrico Pozzobon <enrico.pozzobon@dissecto.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260701-lan78xx-vlan-promisc-v3-1-232266d32743@dissecto.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39aa1d620d ]
Move following functions to avoid forward declarations in the code:
- lan78xx_start_hw()
- lan78xx_stop_hw()
- lan78xx_flush_fifo()
- lan78xx_start_tx_path()
- lan78xx_stop_tx_path()
- lan78xx_flush_tx_fifo()
- lan78xx_start_rx_path()
- lan78xx_stop_rx_path()
- lan78xx_flush_rx_fifo()
These functions will be used in an upcoming PHYlink migration patch.
No modifications to the functionality of the code are made.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241204084142.1152696-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 60444706aa ("net: usb: lan78xx: disable VLAN filter in promiscuous mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3be28e2c9c ]
A peer may send a zero-length TLS application_data record; TLS 1.3
explicitly permits these as a traffic-analysis countermeasure (RFC
8446, Section 5.1). After decryption such a record has full_len ==
0. tls_sw_read_sock() hands it to the read_actor, which has no
payload to consume and returns zero. The loop treats a zero return
as backpressure (used <= 0), requeues the skb at the head of
rx_list, and stops. rx_list is serviced head-first on the next
call, so the empty record is dequeued, fails the same way, and is
requeued again; every later record on the connection is blocked
behind it.
tls_sw_recvmsg() does not stall on this: a zero-length data record
copies nothing and falls through to consume_skb(). Mirror that in
the read_sock() path by recognizing an empty data record before
the actor runs, consuming it, and continuing.
Fixes: 662fbcec32 ("net/tls: implement ->read_sock()")
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260630191551.875664-1-cel@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37e0a4b79 ]
When RB_FORCE_8BYTE_ALIGNMENT is true, rb_calculate_event_length()
reserves the space of event->array[0] for placing the data length and
rb_update_event() stores the data length in event->array[0]
accordingly. As a result the whole event length will add extra 4 bytes
for sizeof(event.array[0]) unconditionally.
But ring_buffer_event_length() only subtracts the
sizeof(event->array[0]) for events larger than RB_MAX_SMALL_DATA +
sizeof(event->array[0]). As a result, small events on architectures
with RB_FORCE_8BYTE_ALIGNMENT=true report a data length that is 4
bytes larger than expected.
To fix it, add the RB_FORCE_8BYTE_ALIGNMENT as a condition to subtract
the size of that length field whenever RB_FORCE_8BYTE_ALIGNMENT is
true.
This issue is observed in a riscv64 kernel with
CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, when we run ftrace selftest
trace_marker_raw.tc, we get the weird log: for cases where the id is
1..100, the number of data field is 8*N, but once id exceeds 100, the
number of data field becomes 8*N+4:
# 1 buf: 58 00 00 00 80 5e d1 63 (number of data field is 8*1)
...
# a buf: 58 ... (number of data field is 8*2)
...
# 64 buf: 58 ... (number of data field is 8*13)
# 65 buf: 58 ... (number of data field is 8*13+4)
After applying this change, the number of data field keeps being 8*N+4
consistently.
Link: https://patch.msgid.link/20260607072431.125633-2-hui.wang@canonical.com
Fixes: 2271048d1b ("ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd068ef044 ]
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working.
Fixes: ddd68ec8f4 ("Bluetooth: bpa10x: Read revision information in setup stage")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 384a4b2fef ]
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes: a2a4dedf88 ("Bluetooth: advmon offload MSFT add monitor")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 518aa9505f ]
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e05e91a9a ]
amt_get_size() incorrectly used sizeof(struct iphdr) for the sizes of
IFLA_AMT_DISCOVERY_IP, IFLA_AMT_REMOTE_IP, and IFLA_AMT_LOCAL_IP.
These attributes contain IPv4 addresses (__be32), not full IP headers.
Replace sizeof(struct iphdr) with sizeof(__be32) to avoid over-allocating
netlink message space.
Fixes: b9022b53ad ("amt: add control plane of amt interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260701122329.3562825-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d160b35cc ]
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done.
Fixes: d7b0e37c1a ("net/smc: restructure CDC message reception")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260630183227.2044998-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b519cbcab ]
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260701161912.125355-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0f1887a9e ]
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Suggested-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630174110.2003121-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0a558ca7e ]
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe36 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation.
Fixes: 8a8633978b ("qede: Add build_skb() support.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/20260630164623.3152625-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7a8d500d7 ]
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock.
Fixes: 71c9de9952 ("net: microchip: sparx5: Add VCAP locking to protect rules")
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Link: https://patch.msgid.link/20260630-microchip_fix_vcap_locking-v1-1-f60a4596734d@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b25b5f46 ]
mlx5e_hv_vhca_stats_create() registers the stats agent through
mlx5_hv_vhca_agent_create(). The helper publishes the agent in
hv_vhca->agents[type] under agents_lock and immediately schedules an
asynchronous control invalidation on the HV VHCA workqueue before
returning to mlx5e.
The asynchronous invalidation invokes the control agent's invalidate
callback, which reads the hypervisor control block and forwards the
command to mlx5e_hv_vhca_stats_control(). That callback may either:
- call cancel_delayed_work_sync(&priv->stats_agent.work), or
- call queue_delayed_work(priv->wq, &sagent->work, sagent->delay).
However, the delayed_work and priv->stats_agent.agent are only
initialized after mlx5_hv_vhca_agent_create() returns to mlx5e:
agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */
...
priv->stats_agent.agent = agent; /* too late */
INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */
If the asynchronous control path runs before the two assignments
above, it can:
- Operate on an uninitialized delayed_work whose timer.function is
NULL. queue_delayed_work() calls add_timer() unconditionally, so
when the timer expires the timer softirq invokes a NULL function
pointer.
- Re-initialize the timer later through INIT_DELAYED_WORK() while
the timer is already enqueued in the timer wheel, corrupting the
hlist (entry.pprev cleared while the previous bucket node still
points at this entry).
- When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads
sagent->agent (NULL) and dereferences it inside
mlx5_hv_vhca_agent_write().
Fix this by:
- Initializing priv->stats_agent.work before invoking
mlx5_hv_vhca_agent_create(), so the work is always in a valid
state when the control callback observes it.
- Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter
to mlx5_hv_vhca_agent_create(). The helper writes the agent
pointer to *ctx_update before publishing into hv_vhca->agents[]
and triggering the agents_update flow, so any callback
subsequently invoked from that flow already sees a valid
priv->stats_agent.agent. This avoids having the control
callback participate in agent initialization.
While at it, access priv->stats_agent.agent with
READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and
clear priv->stats_agent.buf on the agent_create() failure path.
Fixes: cef35af34d ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630115151.729219-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25f6b929c7 ]
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand.
Fixes: fa691d0c9c ("net/mlx5e: Allocate per-channel stats dynamically at first usage")
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260630115151.729219-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b47026fb4 ]
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path.
Fixes: 472a73e007 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43ccc20b5a ]
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhixing Chen <running910@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 444853cd43 ]
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64.
Fixes: 1c0d32fde5 ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Feng Wu <wufengwufengwufeng@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland
Yong Wang
Zhengchuan Liang
Michael Bommarito
Cássio Gabriel
Peter Ujfalusi
Zhang Tianci
Wentao Liang
Guangshuo Li
Harman Kalra
Li RongQing
Wang Yan
Timur Tabi
Cao Guanghui
Chuck Lever
Rongguang Wei
Julian Anastasov
Yizhou Zhao
Eric Dumazet
Kuniyuki Iwashima
Suman Ghosh
Samuel Moelius
Enrico Pozzobon
Oleksij Rempel
Chuck Lever
Hui Wang
Weiming Shi
Pauli Virtanen
Cen Zhang
Xiang Mei
Jamal Hadi Salim
Shigeru Yoshida
Jens Emil Schulz Østergaard
Feng Liu
Wyatt Feng
Zhixing Chen
Feng Wu