[ Upstream commit ef19a9cf03 ]
Board files in arch/arm/plat-orion, arch/arm/mach-dove,
arch/arm/mach-mv78xx0 and arch/arm/mach-orion5x still register the
"sata_mv" device with two resources (IORESOURCE_MEM plus IORESOURCE_IRQ).
Those devices are rejected with -EINVAL, so SATA no longer probes on
legacy Marvell Orion/Kirkwood-style boards.
Accept both 1 resource (DT, IRQ fetched via platform_get_irq()) and 2
resources (legacy, IRQ supplied as a second resource) so both probing
paths work.
Fixes: b3b2bec964 ("ata: sata_mv: Fixes expected number of resources now IRQs are gone")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee1d727410 ]
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback.
Fixes: e6fd6d7e5f ("dmaengine: idxd: add a device to represent the file opened")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260525141550.1385581-1-dbgh9129@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1150115e ]
When terminating DMA transfers, active descriptors are not properly
reclaimed. Only cyclic descriptors were handled, leaving non-cyclic
descriptors and their LLI chains to be permanently leaked.
Fix by using vchan_terminate_vdesc() which handles both cyclic and
non-cyclic descriptors by adding them to desc_terminated queue for
proper cleanup.
Add pchan->desc != pchan->done check to prevent double-adding completed
descriptors, which would corrupt the list.
Fixes: 5558593087 ("dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Suggested-by: Frank Li <Frank.li@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260701045733.33654-1-zenghongling@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c5d2d3c3f ]
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e01 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue.
Fixes: 559c1e1e01 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5dc58181 ]
Since Qualcomm inline-crypto engine (ICE) is now a dedicated driver
de-coupled from the QCOM UFS driver, it explicitly votes for its required
clocks during probe. For scenarios where the 'clk_ignore_unused' flag is
not passed on the kernel command line, to avoid potential unclocked ICE
hardware register access during probe the ICE driver should additionally
vote on the 'iface' clock.
Also update the suspend and resume callbacks to handle un-voting and voting
on the 'iface' clock.
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-2-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b9a097eb2 ]
commit b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") assumed that all HID devices attached
to the logitech-dj driver was having an output report of DJ_SHORT.
However, on the receiver itself, we have 2 other HID device we attach
here: the mouse emulation and the keyboard emulation. For those devices
the value of rep is NULL and we are triggered a segfault here.
This is doubly required because logitech-dj also handles non DJ devices
that might not have the DJ collection.
Fixes: b6a5791285 ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT related user initiated OOB write")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a5791285 ]
logi_dj_recv_send_report() assumes that all incoming REPORT_ID_DJ_SHORT
reports are 14 Bytes (DJREPORT_SHORT_LENGTH - 1) long. It uses that
assumption to load the associated field's 'value' array with 14 Bytes of
data. However, if a malicious user only sends say 1 Byte of data,
'report_count' will be 1 and only 1 Byte of memory will be allocated to
the 'value' Byte array. When we come to populate 'value[1-13]' we will
experience an OOB write.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a940aee176 ]
Since we will need to differentiate between the two report_enum types
soon, let's unify the naming conventions now to save confusion and/or
unnecessary/unrelated changes in upcoming commits.
{input,output}_report_enum is used in other places to let's conform.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b65352a1ba upstream.
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295dd295e2 ]
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)
Fixes: 397fc9e5ce ("mpls: route get support")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260723010830.289917-1-yhlee@isslab.korea.ac.kr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb0f9aefd ]
A recent series to fix expectations broke helper propagation via
expectation, this mechanism is used by the sip and h323 helper. This
also propagates the conntrack helper to expected connections. I changed
semantics of exp->helper which now tells us the actual helper that
created the expectation.
Add an explicit assign_helper field to expectations for this purpose
and update helpers to use it.
Restore this feature for userspace conntrack helper via ctnetlink
nfqueue integration so it is again possible to attach a helper to an
expectation, where it makes sense. This is not restored via ctnetlink
expectation creation as there is no client for such feature. Use the
expectation layer 4 protocol number for the helper lookup for
consistency.
Make sure the expectation using this helper propagation mechanism also
go away when the helper is unregistered.
Fixes: 9c42bc9db9 ("netfilter: nf_conntrack_expect: honor expectation helper field")
Fixes: 917b61fa20 ("netfilter: ctnetlink: ignore explicit helper on new expectations")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7e7f81cf6f upstream.
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt.
Co-developed-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 608c8f5dcc which is
commit 7e7f81cf6f upstream.
It was incorrect, a more correct fix will be applied next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e7f81cf6f upstream.
An attacker injecting interrupts while the Safe-RET mitigation executes
on machines affected by SRSO can neutralize the safe return sequence,
potentially leading to data leakage through speculative execution.
Fixup register state as if the Safe-RET sequence executed successfully
by "emulating" it, in a manner of speaking, and avoid executing a RET
instruction after returning from the interrupt.
Co-developed-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: David Kaplan <David.Kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25f744ffa0 upstream.
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle.
Fixes: 774c47f1d7 ("[PATCH] KVM: cpu hotplug support")
Reported-by: Chandrakanth Silveru <Chandrakanth.Silveru@amd.com>
Tested-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Message-ID: <20260715063506.672432-1-nikunj@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d0e25c1dd upstream.
The message of commit 504e2b4ab9 ("dma-buf/udmabuf: skip redundant cpu sync to
fix cacheline EEXIST warning") says:
> The CPU sync at map/unmap time is also redundant for udmabuf:
> begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
> cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
> access is requested through the dma-buf interface.
This, however, does not apply to the first time begin_cpu_udmabuf() is
called on an udmabuf, in which case the implementation previously relied on
get_sg_table() to perform the cache synchronisation.
Ensure to call dma_sync_sgtable_for_cpu() in that case as well.
Fixes: 504e2b4ab9 ("dma-buf/udmabuf: skip redundant cpu sync to fix cacheline EEXIST warning")
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patch.msgid.link/20260627105725.9083-1-robert.mader@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282a4482e1 upstream.
Commit e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 954157679e upstream.
damon_set_regions() assumes the input ranges are sorted by the address and
don't overlap each other. Hence the assumption was initially to be
explicitly validated. But commit 97d482f459 ("mm/damon/sysfs: reuse
damon_set_regions() for regions setting") has mistakenly removed the
validation.
This can make DAMON behave in unexpected ways. At the best, the
monitoring results snapshot will just look weird since there will be
overlapping regions. DAMOS will also work weirdly, applying the same
action multiple times for overlapping regions, and make DAMOS quota weird.
More seriously, depending on the setup and regions updates sequence,
negative size regions can be made. It will trigger WARN_ONCE() if the
kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the
monitoring results, the negative size region can further trigger division
by zero in damon_merge_two_regions().
Note that some of the consequences including the WARN_ONCE() and the
divide by zero depend on commits that were introduced after the root cause
commit 97d482f459 ("mm/damon/sysfs: reuse damon_set_regions() for
regions setting").
Fix the problems by checking the assumption and returning an error if
the input ranges don't meet the assumption.
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260703165610.92894-1-sj@kernel.org
Link: https://lore.kernel.org/20260630041806.151124-1-sj@kernel.org [1]
Fixes: 97d482f459 ("mm/damon/sysfs: reuse damon_set_regions() for regions setting")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SJ Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1292c0ecb1 upstream.
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function.
Link: https://lore.kernel.org/20260630035221.146458-1-sj@kernel.org
Fixes: 43b0536cb4 ("mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)")
Signed-off-by: SJ Park <sj@kernel.org>
Cc: Yang yingliang <yangyingliang@huawei.com>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SJ Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The backport of upstream commit b5325b2a27 introduced a reference
count leak for pidfs_file.
In the upstream implementation, pidfs_file is declared with
__free(fput), which automatically drops the initial file reference when
leaving the scope. During the backport, the code was rewritten to manage
the file pointer manually, but after a successful replace_fd(),
pidfs_file was simply cleared without dropping the initial reference.
As a result, the pidfs file keeps an extra reference and is never
released after the usermode helper exits, leaving associated objects,
such as struct pid, permanently allocated and triggering kmemleak
reports.
Fix this by explicitly calling fput(pidfs_file) after replace_fd().
Fixes: cdb61a705f ("coredump: hand a pidfd to the usermode coredump helper")
Signed-off-by: Qian Zuo <zuoqian113@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e800decd9c ]
On Intel platforms with a VMX preemption timer and APICv, if a VMM
calls KVM_GET_LAPIC before KVM_GET_MSRS to save the vCPU state, it is
possible to lose a pending timer interrupt.
If the thread running these ioctls is migrated to another core after
calling KVM_GET_LAPIC but before KVM_GET_MSRS and the guest is using
their LAPIC timer in TSC-deadline mode, not only does the save LAPIC
state not carry the pending interrupt, the TSCDEADLINE MSR will be
zeroed.
After migration across CPUs, KVM_GET_MSRS calls vcpu_load, posting the
interrupt and clearing the MSR:
vcpu_load() ->
kvm_arch_vcpu_load() ->
kvm_lapic_restart_hv_timer() ->
start_hv_timer() ->
apic_timer_expired() ->
kvm_apic_inject_pending_timer_irqs()
. post interrupt into the LAPIC state
. clear IA32_TSCDEADLINE
The saved LAPIC state will be missing the pending interrupt and the saved
MSR will be zero. Oops.
Fix by only posting an interrupt when we're attempting to enter the guest
(vcpu->wants_to_run == true), not for vcpu_load from other paths.
Assisted-by: gemini:gemini-3.1-pro-preview
Debugged-by: David Matlack <dmatlack@google.com>
Debugged-by: Sean Christopherson <seanjc@google.com>
Debugged-by: Jim Mattson <jmattson@google.com>
Debugged-by: James Houghton <jthoughton@google.com>
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Message-ID: <20260715234234.15382-2-venkateshs@chromium.org>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Cc: stable@vger.kernel.org
Fixes: ae95f566b3 ("KVM: X86: TSCDEADLINE MSR emulation fastpath", 2020-05-15)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6816314af ]
Introduce vcpu->wants_to_run to indicate when a vCPU is in its core run
loop, i.e. when the vCPU is running the KVM_RUN ioctl and immediate_exit
was not set.
Replace all references to vcpu->run->immediate_exit with
!vcpu->wants_to_run to avoid TOCTOU races with userspace. For example, a
malicious userspace could invoked KVM_RUN with immediate_exit=true and
then after KVM reads it to set wants_to_run=false, flip it to false.
This would result in the vCPU running in KVM_RUN with
wants_to_run=false. This wouldn't cause any real bugs today but is a
dangerous landmine.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240503181734.1467938-2-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: e800decd9c ("KVM: x86: Only reset TSC Deadline Timer in apic_timer_expired on KVM_RUN")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b9f089723a ]
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID.
Fixes: e0bdfe8e36 ("x86/intel_rdt: Support creation/removal of pseudo-locked region")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/551432dd7e624a862b8e58314c38aaba0afff3e9.1783377598.git.reinette.chatre@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27f575836c ]
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty.
Fixes: 89e5785fc8 ("[PATCH] Atmel MACB ethernet driver")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260702-macb-drop-tx-v4-1-1c833eebdbc8@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ adjusted context to free each queue's Tx/Rx rings individually since 6.12 lacks the single-dma_alloc_coherent refactor ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 533a0b940f ]
ata_dev_config_cpr() takes the number of range descriptors from buf[0]
of the concurrent positioning ranges log (up to 255), which the device
reports independently of the log size in the GPL directory. The count is
then walked at a fixed 32-byte stride in two places with no bound: the
log read here, and the INQUIRY VPD page B9h emitter, which writes one
descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device
reporting a count larger than its own log overflows the read buffer (up
to 7704 bytes past a 512-byte slab), and a count above 62 overflows the
response buffer on the emit side.
Bound the count once, on probe, against both the log the device returned
and the number of descriptors the VPD B9h response buffer can hold
(ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range
count with a warning; this keeps the emitter in bounds with no separate
change there.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
Fixes: c745dfc541 ("libata: fix reading concurrent positioning ranges log")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[ adapted `kzalloc_flex()` allocation to `kzalloc(struct_size(...), GFP_KERNEL)` and adjusted context offsets. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62e7df6d04 ]
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed.
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260630071625.349996-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a3f3859cec ]
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref.
Cc: stable@vger.kernel.org
Fixes: b52da4054e ("ipmi: Rework user message limit handling")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Message-ID: <20260603120634.3758747-1-vulab@iscas.ac.cn>
Signed-off-by: Corey Minyard <corey@minyard.net>
[ changed `free_ipmi_user` to `free_user` in the two added `kref_put()` calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dec4d8118c ]
xbc_snprint_cmdline() is meant to be called twice: first with
buf=NULL, size=0 to probe the rendered length, then with a real
buffer to fill it (the standard snprintf() two-pass pattern). The
probe call makes the function compute "buf + size" (NULL + 0) and,
on every iteration, advance "buf += ret" from that NULL base and
pass the result back into snprintf().
Pointer arithmetic on a NULL pointer is undefined behavior. It is
harmless in the in-kernel callers today, but the follow-up patches
run this same code in the userspace tools/bootconfig parser at kernel
build time, where host UBSan / FORTIFY_SOURCE abort the build.
Track a running written length (size_t) instead of mutating @buf, and
only form "buf + len" when @buf is non-NULL. snprintf(NULL, 0, ...)
is itself well defined and returns the would-be length, so the
two-pass "probe then fill" usage returns identical byte counts.
Link: https://lore.kernel.org/all/20260626-bootconfig_using_tools-v7-1-24ab72139c29@debian.org/
Fixes: 51887d03ac ("bootconfig: init: Allow admin to use bootconfig for kernel command line")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5a643e4623 ]
Move xbc_snprint_cmdline() from init/main.c to lib/bootconfig.c so the
function (and its xbc_namebuf scratch buffer) becomes part of the shared
parser library. tools/bootconfig already compiles lib/bootconfig.c
directly, which lets a follow-up patch reuse the same renderer in the
userspace tool to convert a bootconfig file into a flat cmdline string
at build time.
No functional change.
Link: https://lore.kernel.org/all/20260508-bootconfig_using_tools-v1-1-1132219aa773@debian.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: dec4d8118c ("bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 212f863fa8 ]
When trying to migrate to using bootconfig to embed the kernel's and
PID1's command line with the kernel image itself, and so allowing changing
that without modifying the bootloader, I noticed that /proc/cmdline
changed from e.g.
console=ttymxc0,115200n8 cma=128M quiet -- --log-level=notice
to
console="ttymxc0,115200n8" cma="128M" quiet -- --log-level="notice"
The kernel parameters are parsed just fine, and the quotes are indeed
stripped from the actual argv[] given to PID1. However, the quoting
doesn't really serve any purpose and looks excessive, and might confuse
some (naive) userspace tool trying to parse /proc/cmdline. So do not
quote the value unless it contains whitespace.
Link: https://lkml.kernel.org/r/20240320101952.62135-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: dec4d8118c ("bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cdcf3d2ca ]
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block.
Fixes: 893ae97214 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Dropped `rvu->pdev` argument from `rvu_get_pf()` calls and folded in the `is_pf_func_valid()` de-static plus its `rvu.h` declaration from commit 2156a29aec. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1781172526 ]
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks.
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 4ba9c3afda ("gpio: mt7621: Add a driver for MT7621")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20260626060112.2498324-2-sergio.paracuellos@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
[ Changed `guard(gpio_generic_lock_irqsave)(&rg->chip)` to `guard(spinlock_irqsave)(&rg->lock)` as the generic GPIO chip lock does not exist in this tree. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3e91a95b2 ]
tegra_gpio_direction_input() and tegra_gpio_direction_output() already
program the GPIO controller direction registers directly. The additional
pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl
operation, because the Tegra pinmux ops provide GPIO request/free
handling but no gpio_set_direction hook.
The extra call still enters the pinctrl core and takes pctldev->mutex.
Shared GPIO users can call the direction path while holding their
per-line spinlock, so this otherwise redundant pinctrl direction call can
sleep in an atomic context.
This was found by our static analysis tool and then confirmed by manual
review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the
Tegra pinctrl ops. The reviewed path has a default non-sleeping
struct gpio_chip while the direction callback still enters the pinctrl
mutex path.
A directed runtime validation kept the same non-sleeping chip registration
and drove:
gpio_shared_proxy_direction_output()
gpiod_direction_output_raw_commit()
tegra_gpio_direction_output()
pinctrl_gpio_direction_output()
Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock
held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output()
on the stack.
Do not mark the whole chip as can_sleep to paper over this: can_sleep
describes whether get()/set() may sleep, and Tegra value access is MMIO.
Remove the redundant pinctrl direction calls and keep pinctrl involvement
in the existing request/free path.
Fixes: 11da905412 ("gpio: tegra: Fix offset of pinctrl calls")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260619152439.1239561-1-runyu.xiao@seu.edu.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 89038cc87d ]
rt_spin_unlock() releases the RCU protection before unlocking the
lock. That opens the door for the following UAF scenario:
T1 T2
spin_lock(&p->lock); rcu_read_lock();
invalidate(p); p = rcu_dereference(ptr);
rcu_assign_pointer(ptr, NULL); if (!p) return;
spin_unlock(&p->lock); spin_lock(&p->lock)
lock(&lock->lock);
rcu_read_lock();
kfree_rcu(p); rcu_read_unlock();
....
spin_unlock(&p->lock)
rcu_read_unlock(); // Ends grace period
rcu_do_batch()
kfree(p);
UAF -> rt_mutex_cmpxchg_release(&lock->lock...)
Regular spinlocks keep preemption disabled accross the unlock operation,
which provides full RCU protection, but the RT substitution fails to
resemble that. Same applies for the rwlock substitution.
Move the rcu_read_unlock() invocation past the unlock operations to match
the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but
that's harmless as the caller needs to hold RCU read lock across the lock
operation. The migrate_enable() call stays before the unlock operation
because there is no per CPU operation in the unlock path which would
require migration to be kept disabled.
Fixes: 0f383b6dc9 ("locking/spinlock: Provide RT variant")
Reported-by: syzbot+000c800a02097aaa10ed@syzkaller.appspotmail.com
Decoded-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/87jyrud75z.ffs@fw13
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aa6dcd5c8d ]
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d0 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed.
Fixes: 06b16ae531 ("libertas_tf: main.c, data paths and mac80211 handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/178211481807.2212567.8773346114561900100@maoyixie.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50fd6dd755 ]
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated.
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260707165912.2560537-2-michael.bommarito@gmail.com
Reported-by: XIAO WU <xiaowu.417@qq.com>
Closes: https://lore.kernel.org/all/tencent_89647CE40DC452B891C65C94D1B271DE8E07@qq.com/
Suggested-by: Beau Belgrave <beaub@linux.microsoft.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 128ea9f6cc ]
Currently, if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make it
clear by adding a system_percpu_wq.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 50fd6dd755 ("tracing/user_events: Fix use-after-free in user_event_mm_dup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fcdb1b444 ]
Factor out init_cpu_worker_pool() from workqueue_init_early(). This is pure
reorganization in preparation of BH workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Allen Pais <allen.lkml@gmail.com>
Stable-dep-of: 50fd6dd755 ("tracing/user_events: Fix use-after-free in user_event_mm_dup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rosen Penev
Yuho Choi
Hongling Zeng
Konrad Dybcio
Michael Bommarito
Harshal Dev
Benjamin Tissoires
Lee Jones
Eddie Phillips
Yehyeong Lee
Lorenzo Bianconi
Pablo Neira Ayuso
Greg Kroah-Hartman
Borislav Petkov (AMD)
Nikunj A Dadhania
David Howells
Robert Mader
Julien Massot
Chen-Yu Tsai
SJ Park
Qian Zuo
Venkatesh Srinivas
David Matlack
Reinette Chatre
Haoxiang Li
Théo Lebrun
Bryam Vargas
Dawei Feng
Wentao Liang
Breno Leitao
Rasmus Villemoes
Junrui Luo
Sergio Paracuellos
Maoyi Xie
Runyu Xiao
Bartosz Golaszewski
Dexuan Cui
Thomas Gleixner
Marco Crivellari
Tejun Heo
Dmitry Torokhov