We set the type of ParamDecls when applying solutions in the normal path, but
sometimes code completion will type check an expression inside a closure without
checking the outer expression. In this case, we may have inferred a type for
the ParamDecl, but we don't write it back.
Instead, just look at the DeclRefExpr's type.
Fixes <rdar://problem/42098113>.
This is a defensive move to avoid duplicated work and guard against crashes
when a multi-expression closure body or TapExpr has not been type checked yet.
Fixes <rdar://problem/48852402>.
Instead of building ArgumentShuffleExprs, lets just build a TupleExpr,
with explicit representation of collected varargs and default
arguments.
This isn't quite as elegant as it should be, because when re-typechecking,
SanitizeExpr needs to restore the 'old' parameter list by stripping out
the nodes inserted by type checking. However that hackery is all isolated
in one place and will go away soon.
Note that there's a minor change the generated SIL. Caller default
arguments (#file, #line, etc) are no longer delayed and are instead
evaluated in their usual argument position. I don't believe this actually
results in an observable change in behavior, but if it turns out to be
a problem, we can pretty easily change it back to the old behavior with a
bit of extra work.
TupleShuffleExpr could not express the full range of tuple conversions that
were accepted by the constraint solver; in particular, while it could re-order
elements or introduce and eliminate labels, it could not convert the tuple
element types to their supertypes.
This was the source of the annoying "cannot express tuple conversion"
diagnostic.
Replace TupleShuffleExpr with DestructureTupleExpr, which evaluates a
source expression of tuple type and binds its elements to OpaqueValueExprs.
The DestructureTupleExpr's result expression can then produce an arbitrary
value written in terms of these OpaqueValueExprs, as long as each
OpaqueValueExpr is used exactly once.
This is sufficient to express conversions such as (Int, Float) => (Int?, Any),
as well as the various cases that were already supported, such as
(x: Int, y: Float) => (y: Float, x: Int).
https://bugs.swift.org/browse/SR-2672, rdar://problem/12340004
Right now we use TupleShuffleExpr for two completely different things:
- Tuple conversions, where elements can be re-ordered and labels can be
introduced/eliminated
- Complex argument lists, involving default arguments or varargs
The first case does not allow default arguments or varargs, and the
second case does not allow re-ordering or introduction/elimination
of labels. Furthermore, the first case has a representation limitation
that prevents us from expressing tuple conversions that change the
type of tuple elements.
For all these reasons, it is better if we use two separate Expr kinds
for these purposes. For now, just make an identical copy of
TupleShuffleExpr and call it ArgumentShuffleExpr. In CSApply, use
ArgumentShuffleExpr when forming the arguments to a call, and keep
using TupleShuffleExpr for tuple conversions. Each usage of
TupleShuffleExpr has been audited to see if it should instead look at
ArgumentShuffleExpr.
In sequent commits I plan on redesigning TupleShuffleExpr to correctly
represent all tuple conversions without any unnecessary baggage.
Longer term, we actually want to change the representation of CallExpr
to directly store an argument list; then instead of a single child
expression that must be a ParenExpr, TupleExpr or ArgumentShuffleExpr,
all CallExprs will have a uniform representation and ArgumentShuffleExpr
will go away altogether. This should reduce memory usage and radically
simplify parts of SILGen.
We weren't renaming all occurrences of 'x' in the cases like the below:
case .first(let x), .second(let x):
print("foo \(x)")
fallthrough
case .third(let x):
print("bar \(x)")
We would previously only rename occurrences within the case statement the query
was made in (ignoring fallthroughs) and for cases with multiple patterns (as in
the first case above) we would only rename the occurrence in the first pattern.
This is in preparation for fixing issues around SILGenPattern fallthrough
emission and bad rename/edit all in scope of case stmt var decls. Specifically,
I am going to ensure that we can get from any VarDecl in the following to any
other VarDecl:
switch x {
case .a(let v1, let v2), .b(let v1, let v2):
...
fallthrough
case .c(let v1, let v2), .d(let v1, let v2):
...
}
This will be done by:
1. Pointing the var decls in .d at the corresponding var decls in .c.
2. Pointing the var decls in .c at the corresponding var decls in .b.
3. Pointing the var decls in .b at the corresponding var decls in .a.
4. Pointing the var decls in .a at the case stmt. Recognizing that we are asking
for the next VarDecl, but have a case stmt, we check if we have a fallthrough
case stmt. If so, follow down the fallthrough case stmts until you find a
fallthrough case stmt that doesn't fallthrough itself and then return the
corresponding var decl in the last case label item in that var decl (in the
above .d).
In a subsequent commit I am going to add case body var decls. The only change as
a result of that is that I will insert them into the VarDecl double linked list
after the last case var decl of each case stmt.
Add assetion along with defensive guard to avoid crashing in release
build. Hopefully, sourcekitd Stress Tester find a reproducer for the
crash.
rdar://problem/47895109
Instead of constructing calls to
ExpressibleByNilLiteral.init(nilLiteral: ()) in CSApply.cpp, just
annotate NilLiteralExpr with the selected construtor and do the actual
construction during SILGen.
For context, StringLiteralExpr already behaves this way.
The diagnostics for `variable_never_mutated` always suggests
changing `var` to `let`, which is misleading in case of
for-each loops where explicitly immutable context applies.
This patch adds some variety to the message to make it appropriate.
Resolves: SR-9732
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Most of this patch is just removing special cases for materializeForSet
or other fairly mechanical replacements. Unfortunately, the rest is
still a fairly big change, and not one that can be easily split apart
because of the quite reasonable reliance on metaprogramming throughout
the compiler. And, of course, there are a bunch of test updates that
have to be sync'ed with the actual change to code-generation.
This is SR-7134.
- getAsDeclOrDeclExtensionContext -> getAsDecl
This is basically the same as a dyn_cast, so it should use a 'getAs'
name like TypeBase does.
- getAsNominalTypeOrNominalTypeExtensionContext -> getSelfNominalTypeDecl
- getAsClassOrClassExtensionContext -> getSelfClassDecl
- getAsEnumOrEnumExtensionContext -> getSelfEnumDecl
- getAsStructOrStructExtensionContext -> getSelfStructDecl
- getAsProtocolOrProtocolExtensionContext -> getSelfProtocolDecl
- getAsTypeOrTypeExtensionContext -> getSelfTypeDecl (private)
These do /not/ return some form of 'this'; instead, they get the
extended types when 'this' is an extension. They started off life with
'is' names, which makes sense, but changed to this at some point. The
names I went with match up with getSelfInterfaceType and
getSelfTypeInContext, even though strictly speaking they're closer to
what getDeclaredInterfaceType does. But it didn't seem right to claim
that an extension "declares" the ClassDecl here.
- getAsProtocolExtensionContext -> getExtendedProtocolDecl
Like the above, this didn't return the ExtensionDecl; it returned its
extended type.
This entire commit is a mechanical change: find-and-replace, followed
by manual reformatted but no code changes.
This is a legacy holdover from when tuple types had default
arguments, and also the constraint solver's matching of function
types pre-SE-0110.
Well, move the last live usage to CSDiag, where it can die a slow
painful death over time. The other usages were not doing anything.
This patch adds warning for redundant access-level modifiers
used in an extension. It also refines the diagnostics of
access_control_ext_member_more issues, in case the fixit
could suggest redundant modifiers.
Resolves: SR-8453.
ClassDecl::getSuperclass() produces a complete interface type describing the
superclass of a class, including any generic arguments (for a generic type).
Most callers only need the referenced ClassDecl, which is (now) cheaper
to compute: switch those callers over to ClassDecl::getSuperclassDecl().
Fixes an existing test for SR-5993.
For now, the accessors have been underscored as `_read` and `_modify`.
I'll prepare an evolution proposal for this feature which should allow
us to remove the underscores or, y'know, rename them to `purple` and
`lettuce`.
`_read` accessors do not make any effort yet to avoid copying the
value being yielded. I'll work on it in follow-up patches.
Opaque accesses to properties and subscripts defined with `_modify`
accessors will use an inefficient `materializeForSet` pattern that
materializes the value to a temporary instead of accessing it in-place.
That will be fixed by migrating to `modify` over `materializeForSet`,
which is next up after the `read` optimizations.
SIL ownership verification doesn't pass yet for the test cases here
because of a general fault in SILGen where borrows can outlive their
borrowed value due to being cleaned up on the general cleanup stack
when the borrowed value is cleaned up on the formal-access stack.
Michael, Andy, and I discussed various ways to fix this, but it seems
clear to me that it's not in any way specific to coroutine accesses.
rdar://35399664
Pass through the location of the equal '=' token for pattern binding decl entries, and use this location for the immediate deallocation diagnostic. Previously, we were just diagnosing on the start of the initialiser expression.
Additionally, this commit moves the call to `diagnoseUnownedImmediateDeallocation` from `typeCheckBinding` to `typeCheckPatternBinding`. This not only gives us easier access to the PBD entry, but also avoids calling the diagnostic logic for statement conditions such as `if let x = <expr>`. We currently never diagnose on these anyway, as the 'weak' and 'unowned' keywords cannot be applied to such bindings.
Resolves [SR-7340](https://bugs.swift.org/browse/SR-7340).
A type checker instance isn’t needed for most of the “override” checking,
so remove the TypeChecker parameters and instead get the ASTContext or
DiagnosticEngine from whatever decl or type is available. Another step
toward reducing dependency on a TypeChecker instance.
The storage kind has been replaced with three separate "impl kinds",
one for each of the basic access kinds (read, write, and read/write).
This makes it far easier to mix-and-match implementations of different
accessors, as well as subtleties like implementing both a setter
and an independent read/write operation.
AccessStrategy has become a bit more explicit about how exactly the
access should be implemented. For example, the accessor-based kinds
now carry the exact accessor intended to be used. Also, I've shifted
responsibilities slightly between AccessStrategy and AccessSemantics
so that AccessSemantics::Ordinary can be used except in the sorts of
semantic-bypasses that accessor synthesis wants. This requires
knowing the correct DC of the access when computing the access strategy;
the upshot is that SILGenFunction now needs a DC.
Accessor synthesis has been reworked so that only the declarations are
built immediately; body synthesis can be safely delayed out of the main
decl-checking path. This caused a large number of ramifications,
especially for lazy properties, and greatly inflated the size of this
patch. That is... really regrettable. The impetus for changing this
was necessity: I needed to rework accessor synthesis to end its reliance
on distinctions like Stored vs. StoredWithTrivialAccessors, and those
fixes were exposing serious re-entrancy problems, and fixing that... well.
Breaking the fixes apart at this point would be a serious endeavor.
The currying behavior of method references completely breaks in the face of `inout` semantics, even moreso with exclusivity enforcement, but we failed to diagnose these references in Swift 4 and previous versions. Raise a compatibility warning when these references are found in Swift 4 code, or error in Swift 5 and later. Simplify the partial application logic here slightly too now that standalone functions do not allow currying. Addresses rdar://problem/41361334 | SR-8074.
We incorrectly allowed some keypaths to be inferred as writable
keypaths in Swift 3/4 modes. This no longer happens when
-swift-version 5 is specified.
This warning is a limited attempt at providing some advanced notice of
code that will break, only in the cases where the keypath is a direct
argument to a keypath subscript write.
Fixes: rdar://problem/40068274
Introduce some metaprogramming of accessors and generally prepare
for storing less-structured accessor lists.
NFC except for a change to the serialization format.
