After recent changes, this asserts on all decls that are not VarDecls,
so we can just enforce that statically now. Interestingly, this turns
up some dead code which would have asserted immediately if called.
Also, replace AnyFunctionRef::getType() with
AnyFunctionRef::getInterfaceType(), since the old
AnyFunctionRef::getType() would just assert when called on
a Decl.
This fixes a regression from the previous patch which got
rid of PrintOptions::StripDynamicSelf.
When printing protocol declarations with a BaseType set in
PrintOptions, we can end up with a DynamicSelfType wrapping
a non-class type, if the protocol requirement returned
Self.
Note that this changes the diagnostic for missing protocol
requirements slightly; we used to sometimes refer to 'Self'
even if the conforming type is not a class, which is not
accepted by the type checker anyway. I believe the new
diagnostics are more correct.
Store leading a trailing "trivia" around a token, such as whitespace,
comments, doc comments, and escaping backticks. These are syntactically
important for preserving formatting when printing ASTs but don't
semantically affect the program.
Tokens take all trailing trivia up to, but not including, the next
newline. This is important to maintain checks that statements without
semicolon separators start on a new line, among other things.
Trivia are now data attached to the ends of tokens, not tokens
themselves.
Create a new Syntax sublibrary for upcoming immutable, persistent,
thread-safe ASTs, which will contain only the syntactic information
about source structure, as well as for generating new source code, and
structural editing. Proactively move swift::Token into there.
Since this patch is getting a bit large, a token fuzzer which checks
for round-trip equivlence with the workflow:
fuzzer => token stream => file1
=> Lexer => token stream => file 2 => diff(file1, file2)
Will arrive in a subsequent commit.
This patch does not change the grammar.
TypeBase::getMemberSubstitutions(const DeclContext *dc) collects type
substitution information when a decl context can be treated as part of the
type definition. However, we call it without checking whether the
part-of-whole relationship really holds. This patch checks the
pre-condition before calling it to fix a crash.
We don't want the machine calling conventions for closure invocation functions to necessarily be tied to the convention for normal thin functions or methods. NFC yet; for now, 'closure' follows the same behavior as the 'method' convention, but as part of partial_apply simplification it will be a requirement that partial_apply takes a @convention(closure) function and a box and produces a @convention(thick) function from them.
Sugared GenericTypeParamTypes point to GenericTypeParamDecls,
allowing the name of the parameter as written by the user to be
recovered. Canonical GenericTypeParamTypes on the other hand
only store a depth and index, without referencing the original
declaration.
When printing SIL, we wish to output the original generic parameter
names, even though SIL only uses canonical types. Previously,
we used to accomplish this by mapping the generic parameter to an
archetype and printing the name of the archetype. This was not
adequate if multiple generic parameters mapped to the same
archetype, or if a generic parameter was mapped to a concrete type.
The new approach preserves the original sugared types in the
GenericEnvironment, adding a new GenericEnvironment::getSugaredType()
method.
There are also some other assorted simplifications made possible
by this.
Unfortunately this makes GenericEnvironments use a bit more memory,
however I have more improvements coming that will offset the gains,
in addition to making substitution lists smaller also.
UnconditionalAvailabilityKind => PlatformAgnosticAvailabilityKind
::UnavailableInCurrentSwift => ::SwiftVersionSpecific
Plus a couple related method renamings. Prep work for SR-2709.
Type::subst()'s "IgnoreMissing" option was fairly unprincipled, dropping
unsubstituted types into the resulting AST without any indication
whatsoever that anything went wrong. Replace this notion with a new
form of ErrorType that explicitly tracks which substituted type caused
the problem. It's still an ErrorType, but it prints like the
substituted type (which is important for code completion) and allows
us to step back to the substituted type if needed (which is used by
associated type inference). Then, allow Type::subst(), when the new
UseErrorTypes flag is passed, to form partially-substituted types that
contain errors, which both code completion and associated type
inference relied on.
Over time, I hope we can use error-types-with-original-types more
often to eliminate "<<error type>>" from diagnostics and teach
Type::subst() never to return a "null" type. Clients can check
"hasError()" to deal with failure cases rather than checking null.
This particular flag should only be used in rare cases where we don't
want to know about failures, but instead want to get some
partially-formed type. Only very specific parts of the type checker
need this (associated type inference), and code completion relies on
it for slightly-better results.
There was a ton of complicated logic here to work around
two problems:
- Same-type constraints were not represented properly in
RequirementReprs, requiring us to store them in strong form
and parse them out when printing type interfaces.
- The TypeBase::getAllGenericArgs() method did not do the
right thing for members of protocols and protocol extensions,
and so instead of simple calls to Type::subst(), we had
an elaborate 'ArchetypeTransformer' abstraction repeated
in two places.
Rewrite this code to use GenericSignatures and
GenericFunctionType instead of old-school GenericParamLists
and PolymorphicFunctionType.
This changes the code completion and AST printer output
slightly. A few of the changes are actually fixes for cases
where the old code didn't handle substitutions properly.
A few others are subjective, for example a generic parameter
list of the form <T : Proto> now prints as <T where T : Proto>.
We can add heuristics to make the output whatever we want
here; the important thing is that now we're using modern
abstractions.
There's a bit of a hack to deal with generic typealiases, but
overall this makes things more logical.
This is the last big refactoring before we can allow constrained
extensions to make generic parameters concrete. All that remains
is a small set of changes to SIL type lowering, and retooling
some diagnostics in Sema.
Switch printing off of using Function's ExtInfo for autoclosure and
escaping, and onto the ParameterTypeFlags, which let us do precise and
accurate context-sensitive printing of these parameter type
attributes. This fixes a huge list of issues where we were printing
@escaping for things like optional ObjC completion handlers, among
many others. We now correctly print @escaping in more places, and
don't print it when it's not correct.
Also updates the dumper to be consistent and give a good view of the
AST as represented in memory. Tests updated, more involved testing
coming soon.
Now that TupleTypeElts are simpler in Swift 3 (though they're about to
become more complicated for other reasons), most of the cases where we
are explicitly constructing ones are really just plain copies or can
otherwise use existing helper functions.
NFC
This patch is rather large, since it was hard to make this change
incrementally, but most of the changes are mechanical.
Now that we have a lighter-weight data structure in the AST for mapping
interface types to archetypes and vice versa, use that in SIL instead of
a GenericParamList.
This means that when serializing a SILFunction body, we no longer need to
serialize references to archetypes from other modules.
Several methods used for forming substitutions can now be moved from
GenericParamList to GenericEnvironment.
Also, GenericParamList::cloneWithOuterParameters() and
GenericParamList::getEmpty() can now go away, since they were only used
when SILGen-ing witness thunks.
Finally, when printing generic parameters with identical names, the
SIL printer used to number them from highest depth to lowest, by
walking generic parameter lists starting with the innermost one.
Now, ambiguous generic parameters are numbered from lowest depth
to highest, by walking the generic signature, which means test
output in one of the SILGen tests has changed.
I misled Argyrios into thinking we only had a wrapper for the name when
we also have one for the whole attribute. Fix that for @escaping and
@autoclosure.
rdar://problem/27867763
This eliminates a pile of now-dead code in:
* The type checker, where we no longer have special cases for bridging conversions
* The expression ASTs, where we no longer need to distinguish bridging collection up/down casts
* SILGen, which no longer uses
Still to come is the removal of the
_(set|dictionary)Bridge(From|To)ObjectiveC(Conditional)? entrypoints
from the standard library. They're still used by some tests.
Flush out the ASTPrinter's ability to exclude and include specific
attributes to cover TypeAttrKinds and have code-completion use this to
print @escaping in override completions. Incidentally fix a case where
we weren't forwarding important options after type transformation, which
prevented printing @escaping in transformed parameter types.
rdar://problem/27772722
This fixes several issues:
- By default parent types of alias types are not printed which results in
- Erroneous fixits, for example when casting to 'Notification.Name' from a string, which ends up adding erroneous cast
as "Name(rawValue: ...)"
- Hard to understand types in code-completion results and diagnostics
- When printing with 'fully-qualified' option typealias types are printed erroneously like this "<PARENT>.Type.<TYPEALIAS>"
The change make typealias printing same as nominal types and addresses the above.
- Make sure VarDecls have an associated TypeLoc, like ParamDecls do, then use it for printing the VarDecl's type.
This is done by moving ParamDecl's TypeLoc up to the VarDecl.
This is useful for being able to display the parameter names of function types embedded in VarDecls.
- Use the result TypeLoc of functions for printing. This enables printing parameter names of function types embedded in return types.
- Make sure to annotate attributes while they are printed.
