A lot of files transitively include Expr.h, because it was
included from SILInstruction.h, SILLocation.h and SILDeclRef.h.
However in reality most of these files don't do anything
with Exprs, especially not anything in IRGen or the SILOptimizer.
Now we're down to 171 files in the frontend which depend on
Expr.h, which is still a lot but much better than before.
For a long time, we have:
1. Created methods on SILArgument that only work on either function arguments or
block arguments.
2. Created code paths in the compiler that only allow for "function"
SILArguments or "block" SILArguments.
This commit refactors SILArgument into two subclasses, SILPHIArgument and
SILFunctionArgument, separates the function and block APIs onto the subclasses
(leaving the common APIs on SILArgument). It also goes through and changes all
places in the compiler that conditionalize on one of the forms of SILArgument to
just use the relevant subclass. This is made easier by the relevant APIs not
being on SILArgument anymore. If you take a quick look through you will see that
the API now expresses a lot more of its intention.
The reason why I am performing this refactoring now is that SILFunctionArguments
have a ValueOwnershipKind defined by the given function's signature. On the
other hand, SILBlockArguments have a stored ValueOwnershipKind. Rather than
store ValueOwnershipKind in both instances and in the function case have a dead
variable, I decided to just bite the bullet and fix this.
rdar://29671437
Changes:
* Terminate all namespaces with the correct closing comment.
* Make sure argument names in comments match the corresponding parameter name.
* Remove redundant get() calls on smart pointers.
* Prefer using "override" or "final" instead of "virtual". Remove "virtual" where appropriate.
I noticed this by inspection since I had to update this code for load_borrow,
but did not update it for the ownership qualified load/store.
rdar://28685236
This is a cleanup for SILParsing/Printing. I verified that everything was
spelled correctly by taking the current parsing switch moving that into a file,
regenerating it using the .def file and then diffed them. The diff was the same.
rdar://28685236
The new instructions are: ref_tail_addr, tail_addr and a new attribute [ tail_elems ] for alloc_ref.
For details see docs/SIL.rst
As these new instructions are not generated so far, this is a NFC.
The new instructions are: ref_tail_addr, tail_addr and a new attribute [ tail_elems ] for alloc_ref.
For details see docs/SIL.rst
As these new instructions are not generated so far, this is a NFC.
This establishes a real def-use relation from the self-parameter to any instruction which uses the dynamic-self type.
This is an addition to what was already done for opened archetypes.
The biggest part of this commit is to rename "OpenedArchetypeOperands" to "TypeDependentOperands" as this name is now more appropriate.
Other than that the change includes:
*) type-dependent operands are now printed after a SIL instruction in a comment as "type-defs:" (for debugging)
*) FuncationSignatureOpts doesn't need to explicitly check if a function doesn't bind dynamic self to remove a dead self metadata argument
*) the check if a function binds dynamic self (used in the inliner) is much simpler now
*) also collect type-dependent operands for ApplyInstBase::SubstCalleeType and not only in the substitution list
*) with this SILInstruction::mayHaveOpenedArchetypeOperands (used in CSE) is not needed anymore and removed
*) add type dependent operands to dynamic_method instruction
Regarding the generated code it should be a NFC.
Strict aliasing only applies to memory operations that use strict
addresses. The optimizer needs to be aware of this flag. Uses of raw
addresses should not have their address substituted with a strict
address.
Also add Builtin.LoadRaw which will be used by raw pointer loads.
This method returns true if a given kind of instructions may have opened archetype operands. It does not mean that a concrete instruction instance necessarily has such operands.
This enables things like redundant load elimination and should fix the
regression after changing ManagedBuffer(Pointer) to use unsafeAddressWithOwner.
rdar://27138023
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
We were giving special handling to ApplyInst when we were attempting to use
getMemoryBehavior(). This commit changes the special handling to work on all
full apply sites instead of just AI. Additionally, we look through partial
applies and thin to thick functions.
I also added a dumper called BasicInstructionPropertyDumper that just dumps the
results of SILInstruction::get{Memory,Releasing}Behavior() for all instructions
in order to verify this behavior.
The overhead of uniquing the locations in a Densemap isn't worth any of
the potential memory savings: While this adds an extra pointer and
unsigned to each SILInstruction, any extra memory is completely lost in
the noise (measured on a release -emit-ir build of the x86_64 stdlib).
This is not too surpising as the ratio between SILInstructions and unique
SILLocations is not very high and the DenseMap also needs space.
<rdar://problem/22706994>
If a global variable in a module we are compiling has a type containing
a resilient value type from a different module, we don't know the size
at compile time, so we cannot allocate storage for the global statically.
Instead, we will use a buffer, just like alloc_stack does for archetypes
and resilient value types.
This adds a new SIL instruction but does not yet make use of it.
The drivers for this change are providing a simpler API to SIL pass
authors, having a more efficient of the in-memory representation,
and ruling out an entire class of common bugs that usually result
in hard-to-debug backend crashes.
Summary
-------
SILInstruction
Old New
+---------------+ +------------------+ +-----------------+
|SILInstruction | |SILInstruction | |SILDebugLocation |
+---------------+ +------------------+ +-----------------+
| ... | | ... | | ... |
|SILLocation | |SILDebugLocation *| -> |SILLocation |
|SILDebugScope *| +------------------+ |SILDebugScope * |
+---------------+ +-----------------+
We’re introducing a new class SILDebugLocation which represents the
combination of a SILLocation and a SILDebugScope.
Instead of storing an inline SILLocation and a SILDebugScope pointer,
SILInstruction now only has one SILDebugLocation pointer. The APIs of
SILBuilder and SILDebugLocation guarantees that every SILInstruction
has a nonempty SILDebugScope.
Developer-visible changes include:
SILBuilder
----------
In the old design SILBuilder populated the InsertedInstrs list to
allow setting the debug scopes of all built instructions in bulk
at the very end (as the responsibility of the user). In the new design,
SILBuilder now carries a "current debug scope" state and immediately
sets the debug scope when an instruction is inserted.
This fixes a use-after-free issue with with SIL passes that delete
instructions before destroying the SILBuilder that created them.
Because of this, SILBuilderWithScopes no longer needs to be a template,
which simplifies its call sites.
SILInstruction
--------------
It is neither possible or necessary to manually call setDebugScope()
on a SILInstruction any more. The function still exists as a private
method, but is only used when splicing instructions from one function
to another.
Efficiency
----------
In addition to dropping 20 bytes from each SILInstruction,
SILDebugLocations are now allocated in the SILModule's bump pointer
allocator and are uniqued by SILBuilder. Unfortunately repeat compiles
of the standard library already vary by about 5% so I couldn’t yet
produce reliable numbers for how much this saves overall.
rdar://problem/22017421
This reverts commit bf2fdb6764.
One of the build bots reported a malloc/free error, while other bots had successful builds. It could indicate a non-deterministic failure.
Preventively revert this patch as it is the most likely cause of these issues.
rdar://23611346
