The new instructions are: ref_tail_addr, tail_addr and a new attribute [ tail_elems ] for alloc_ref.
For details see docs/SIL.rst
As these new instructions are not generated so far, this is a NFC.
When applying substitutions to substitution lists in SIL, we would
unpack the ArrayRef<Substitution> into a SubstitutionMap on each
iteration over the original ArrayRef<Substitution>. Discourage
this sort of thing by removing the API in question and refactoring
surrounding code.
It makes sense to turn the new epilogue retain/release matcher to an Analysis.
Its currently a data flow with an entry API point. This saves on compilation time,
even though it does not seem to be very expensive right now. But it is a iterative
data flow which could be expensive with large CFGs.
rdar://28178736
When devirtualizing witness method and class method calls, we
transform apply instructions operating on the result of a SIL
witness_method or class_method instruction to direct calls of
a function_ref.
The generic signature of the dynamic call site might not match
the generic signature of the static thunk, so the substitution
list from the dynamic apply instruction cannot be used directly;
instead, we must transform it to a substitution list suitable
for the static thunk.
- With witness methods, the method is called using the protocol
requirement's signature, <Self : P, ...>, however the
witness thunk has a generic signature derived from the
concrete witness.
For example, the requirement might have a signature
<Self : P, T>, where the concrete witness thunk might
have a signature <X, Y>, where the concrete conforming type
is G<X, Y>.
At the call site, we substitute Self := G<X', Y'>; however
to be able to call the witness thunk directly, we need to
form substitutions X := X' and Y := Y'.
- A similar situation occurs with class methods when the
dynamically-dispatched call is performed against a derived
class, but devirtualization actually finds the method on a
base class of the derived class.
The base class may have a different number of generic
parameters than the derived class, either because the
derived class makes some generic parameters of the base
class concrete, or if the derived class introduces new
generic parameters of its own.
In both cases, we need to consider the generic signature of the
dynamic call site (the protocol requirement or the derived
class method) as well as the generic signature of the static
thunk, and carefully remap the substitutions from one form
into another.
Previously the optimizer would implicitly rely on substitutions
being in AllArchetypes order, in particular that concatenating
outer substitutions with inner substitutions makes sense.
This assumption is about to go away, so this patch refactors
the optimizer to use some new abstractions for remapping
substitution lists.
When performing a CSE of open_existential_ref instructions, we replace the new archetype by the old archetype by cloning the uses and re-mapping the archetypes. But we also need to consider that some of the uses of a open_existential_ref instruction (e.g. loads) may produce results depending on the opened archetype being replaced. Therefore, for every such use its own uses (and their uses) should be eventually recursively cloned and type-remapped as well if they depend on the opened archetype being replaced.
Fixes rdar://28136015 and https://bugs.swift.org/browse/SR-2545
This should have identical behavior as the old epilogue retain matcher.
I do not see performance improvement.
The compilation time does not show up on Instrument either.
This patch is rather large, since it was hard to make this change
incrementally, but most of the changes are mechanical.
Now that we have a lighter-weight data structure in the AST for mapping
interface types to archetypes and vice versa, use that in SIL instead of
a GenericParamList.
This means that when serializing a SILFunction body, we no longer need to
serialize references to archetypes from other modules.
Several methods used for forming substitutions can now be moved from
GenericParamList to GenericEnvironment.
Also, GenericParamList::cloneWithOuterParameters() and
GenericParamList::getEmpty() can now go away, since they were only used
when SILGen-ing witness thunks.
Finally, when printing generic parameters with identical names, the
SIL printer used to number them from highest depth to lowest, by
walking generic parameter lists starting with the innermost one.
Now, ambiguous generic parameters are numbered from lowest depth
to highest, by walking the generic signature, which means test
output in one of the SILGen tests has changed.
If a SILBuilder creates a new instruction based on an old instruction and a new instruction is supposed to use some opened archetypes, one needs to set a proper opened archetypes context in the builder based on the opened archetypes used by the old instruction.
This fixes rdar://28024272
This adds the typedef and switches uses of NodeType * to NodeRef. This is in
preparation for the eventual NodeRef-ization of the GraphTraits in LLVM. NFC.
This consists of 3 parts:
1) Extend CallerAnalysis to also provide information if a function is partially applied
2) A new DeadArgSignatureOpt pass, similar to FunctionSignatureOpts, which just specializes for dead arguments of partially applied functions.
3) Let CapturePropagation eliminate such partial_apply instructions and replace them with a thin_to_thick conversion of the specialized functions.
This optimzation improves benchmarks where static struct or class functions are passed as a closure (e.g. -20% for SortStrings).
Such functions have a additional metatype parameter. We used to create a partial_apply in this case, which allocates a context, etc.
But this is not necessary as the metatype parameter is not used in most cases.
rdar://problem/27513085
This re-instates commit de9622654d
The problem of the infinite loop should be fixed by the previous fix in FunctionSignatureOpts.
In addition this new commit implements a safety check to void such cases, even if buggy optimizations try to keep pushing new functions onto the work list.
Instead the pipeline is continued on the old function. This happens when a pass pushes a new, e.g. specialized function, on the function stack.
There is no need to repeat passes which already did run on a function.
It saves a little of compile time and I didn't see any significant impact on code size or performance.
It also simplifies the pass manager.
This establishes a real def-use relation from the self-parameter to any instruction which uses the dynamic-self type.
This is an addition to what was already done for opened archetypes.
The biggest part of this commit is to rename "OpenedArchetypeOperands" to "TypeDependentOperands" as this name is now more appropriate.
Other than that the change includes:
*) type-dependent operands are now printed after a SIL instruction in a comment as "type-defs:" (for debugging)
*) FuncationSignatureOpts doesn't need to explicitly check if a function doesn't bind dynamic self to remove a dead self metadata argument
*) the check if a function binds dynamic self (used in the inliner) is much simpler now
*) also collect type-dependent operands for ApplyInstBase::SubstCalleeType and not only in the substitution list
*) with this SILInstruction::mayHaveOpenedArchetypeOperands (used in CSE) is not needed anymore and removed
*) add type dependent operands to dynamic_method instruction
Regarding the generated code it should be a NFC.
*) cast optimizer: when a bridging cast is replaced with a function call and the owning convention of the instruction and the call parameter do not match, compensating retain/release instructions must be inserted.
*) cast optimizer: when a consuming dead cast instruction is removed a compensating release instruction must be inserted
*) mem2reg: An alloc_stack location which contains a destroy_addr must not be considered as a write-only location. The destroy_addr must be preserved.
rdar://problem/27601057
One minor revision: this lifts the proposed restriction against
overriding a non-open method with an open one. On reflection,
that was inconsistent with the existing rule permitting non-public
methods to be overridden with public ones. The restriction on
subclassing a non-open class with an open class remains, and is
in fact consistent with the existing access rule.
'fileprivate' is considered a broader level of access than 'private',
but for now both of them are still available to the entire file. This
is intended as a migration aid.
One interesting fallout of the "access scope" model described in
758cf64 is that something declared 'private' at file scope is actually
treated as 'fileprivate' for diagnostic purposes. This is something
we can fix later, once the full model is in place. (It's not really
/wrong/ in that they have identical behavior, but diagnostics still
shouldn't refer to a type explicitly declared 'private' as
'fileprivate'.)
As a note, ValueDecl::getEffectiveAccess will always return 'FilePrivate'
rather than 'Private'; for purposes of optimization and code generation,
we should never try to distinguish these two cases.
This should have essentially no effect on code that's /not/ using
'fileprivate' other than altered diagnostics.
Progress on SE-0025 ('fileprivate' and 'private')
This commit fixes a bug where we were not checking that all predecessors had the
cond_fail block as its only successor. This occured since we were bailing early
when we saw a constant. So if we saw a predecessor with a constant before a
predecessor that had multiple successors, we would optimize even though we would
be introducing an extra cond_fail along a path.
I added a new utility pass to test this code since so much is going on in
SimplifyCFG that it is difficult to construct a test case running the full
pass.
Really this code should be in a different pass (properly SIL Code Motion TBH).
But for now, this commit just fixes the bug.
rdar://26904047
Opened archetypes may be used by types of basic block arguments. Therefore, when performing the CSE of open_existential_ref instructions, one should also update the type of any basic block argument that may have used the archetype opened by the open_existential_ref being replaced.
rdar://problem/27386065
Strict aliasing only applies to memory operations that use strict
addresses. The optimizer needs to be aware of this flag. Uses of raw
addresses should not have their address substituted with a strict
address.
Also add Builtin.LoadRaw which will be used by raw pointer loads.
Exceptions can cause an exit before hitting the unsafeGuaranteedEnd instruction.
Make sure that we check post dominance to find such cases.
rdar://26890751
This enables things like redundant load elimination and should fix the
regression after changing ManagedBuffer(Pointer) to use unsafeAddressWithOwner.
rdar://27138023
Now we properly track the dependencies between instructions using opened archetypes and instructions opening those archetypes. No need for any special handling anymore.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Now we properly track the dependencies between instructions using opened archetypes and instructions opening those archetypes. No need for any special handling anymore.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
