Instead, just go on to the next search path. This prevents a
present-but-unreadable directory from leading to a module load
failure, which happens when one user builds a module and another user
loads it (even if those search paths aren't even being used).
There might still be some other errors that would be useful to treat
as "module found but invalid" rather than "module not found", but
experience has shown that it's the wrong default.
There is a Radar for this but I can't find it.
Now that SILFunctions no longer reference a GenericParamList, we
don't need to de-serialize cross-module references to archetypes
anymore.
This was the last remaining usage of AllArchetypes, so we can
finally rip it out.
This patch is rather large, since it was hard to make this change
incrementally, but most of the changes are mechanical.
Now that we have a lighter-weight data structure in the AST for mapping
interface types to archetypes and vice versa, use that in SIL instead of
a GenericParamList.
This means that when serializing a SILFunction body, we no longer need to
serialize references to archetypes from other modules.
Several methods used for forming substitutions can now be moved from
GenericParamList to GenericEnvironment.
Also, GenericParamList::cloneWithOuterParameters() and
GenericParamList::getEmpty() can now go away, since they were only used
when SILGen-ing witness thunks.
Finally, when printing generic parameters with identical names, the
SIL printer used to number them from highest depth to lowest, by
walking generic parameter lists starting with the innermost one.
Now, ambiguous generic parameters are numbered from lowest depth
to highest, by walking the generic signature, which means test
output in one of the SILGen tests has changed.
A GenericEnvironment stores the mapping between GenericTypeParamTypes
and context archetypes (or eventually, concrete types, once we allow
extensions to constrain a generic parameter to a concrete type).
The goals here are two-fold:
- Eliminate the GenericTypeParamDecl::getArchetype() method, and
always use mapTypeIntoContext() instead
- Replace SILFunction::ContextGenericParams with a GenericEnvironment
This patch adds the new data type as well as serializer and AST
verifier support. but nothing else uses it yet.
Note that GenericSignature::get() now asserts if there are no
generic parameters, instead of returning null. This requires a
few tweaks here and there.
The presence of a generic signature in a XREF means that we should only find the result in a (further-constrained) extension with that generic signature. The absence of a generic signature in a XREF means that we should not find the result in a constrained extension. We implemented the former but not the latter, which would lead to deserialization failures if one had both constrained and unconstrained extensions with the same property in them. Methods/initializers weren’t a problem because the generic signature is (redundantly) encoded in their interface type.
I don't see any tests failing with this code removed; I guess
either the duplicate archetype issue no longer occurs, or does
not matter since we use interface types almost everywhere
when talking about Decls from other modules.
- If a parameter type is a sugared function type, mark the type
as non-escaping by default. Previously, we were only doing this
if the parameter type was written as a function type, with no
additional sugar.
This means in the following cases, the function parameter type
is now non-escaping:
func foo(f: ((Int) -> Void))
typealias Fn = (Int) -> Void
func foo(f: Fn)
- Also, allow @escaping to be used in the above cases:
func foo(f: @escaping ((Int) -> Void))
typealias Fn = (Int) -> Void
func foo(f: @escaping Fn)
- Diagnose usages of @escaping in inappropriate locations, instead
of just ignoring them.
It is unfortunate that sometimes we end up desugaring the typealias,
but currently there are other cases where this occurs too, such as
qualified lookpu of protocol typealiases with a concrete base
type, and generic type aliases. A more general representation for
sugared types (such as an AttributedType sugared type) would allow
us to solve this in a more satisfactory manner in the future.
However at the very least this patch factors out the common code
paths and adds comments, so it shouldn't be too bad going forward.
Note that this is a source-breaking change, both because @escaping
might need to be added to parameters with a sugared function type,
and @escaping might be removed if it appears somewhere where we
do not mark function types as non-escaping by default.
This establishes a real def-use relation from the self-parameter to any instruction which uses the dynamic-self type.
This is an addition to what was already done for opened archetypes.
The biggest part of this commit is to rename "OpenedArchetypeOperands" to "TypeDependentOperands" as this name is now more appropriate.
Other than that the change includes:
*) type-dependent operands are now printed after a SIL instruction in a comment as "type-defs:" (for debugging)
*) FuncationSignatureOpts doesn't need to explicitly check if a function doesn't bind dynamic self to remove a dead self metadata argument
*) the check if a function binds dynamic self (used in the inliner) is much simpler now
*) also collect type-dependent operands for ApplyInstBase::SubstCalleeType and not only in the substitution list
*) with this SILInstruction::mayHaveOpenedArchetypeOperands (used in CSE) is not needed anymore and removed
*) add type dependent operands to dynamic_method instruction
Regarding the generated code it should be a NFC.
One minor revision: this lifts the proposed restriction against
overriding a non-open method with an open one. On reflection,
that was inconsistent with the existing rule permitting non-public
methods to be overridden with public ones. The restriction on
subclassing a non-open class with an open class remains, and is
in fact consistent with the existing access rule.
* [ClangImporter] Remove importer-based NS stripping.
As Tony puts it, in the end we wound up with more Foundation
declarations imported as members or keeping "NS" than those that
dropped it, and any further decisions will be made on a case-by-case
basis. Move all of the existing cases of prefix-stripping into
Foundation's API notes and drop the logic from the compiler.
Tested by dumping the generated interface for Foundation and its
submodules for both macOS and the iOS simulator, and comparing the
results. A few cases did slip through here because of the interaction
between "SwiftName" and "Availability: nonswift".
The next commit will re-add "NS" to some stragglers that we missed.
rdar://problem/26880017
* APINotes: Add "NS" back to a few types.
NSKeyedUnarchiverDelegate
NSKeyedArchiverDelegate
NSTextCheckingTypes
NSBinarySearchingOptions
NSEnumerationOptions
NSSortOptions
More rdar://problem/26880017
* Remove now-redundant SwiftNames from API notes.
No change observed in the generated interface of Foundation and its
submodules.
Finishes rdar://problem/26880017.
The isExplicitlyEscaping bit, though useful for printing,
unfortunately puts us in a position where we have different bit
patterns for the same type, and thus lose much of our type equivalence
checking for overriding, protocol conformance, etc., even if we were
to take subtyping into account. We need to drop it, relying on the
existing noescape bit alone to determine the type's semantics (at
least, as long as we continue to encode this information in the type
system).
This is a partial fix; we will now be excessively printing @escaping,
but the subsequent commits will correct this. For printing, we will
instead need to be more context-aware.
What I've implemented here deviates from the current proposal text
in the following ways:
- I had to introduce a FunctionArrowPrecedence to capture the parsing
of -> in expression contexts.
- I found it convenient to continue to model the assignment property
explicitly.
- The comparison and casting operators have historically been
non-associative; I have chosen to preserve that, since I don't
think this proposal intended to change it.
- This uses the precedence group names and higherThan/lowerThan
as agreed in discussion.
More detail: some members are intended to have the same the access as
their containing types. This doesn't fly for SE-0025 'private', which
would limit the members to only being accessed from lexically within
the type decl, instead anywhere the type itself can be seen. Instead,
follow the rule for user-written members---internal by default---and
then raise the access level to 'public' if necessary. This affects:
- enum cases
- deinitializers
- protocol requirements
- generic parameters
- implicit initializers
- inherited initializers
- derived conformance members
- synthesized typealiases for associated types
'fileprivate' is considered a broader level of access than 'private',
but for now both of them are still available to the entire file. This
is intended as a migration aid.
One interesting fallout of the "access scope" model described in
758cf64 is that something declared 'private' at file scope is actually
treated as 'fileprivate' for diagnostic purposes. This is something
we can fix later, once the full model is in place. (It's not really
/wrong/ in that they have identical behavior, but diagnostics still
shouldn't refer to a type explicitly declared 'private' as
'fileprivate'.)
As a note, ValueDecl::getEffectiveAccess will always return 'FilePrivate'
rather than 'Private'; for purposes of optimization and code generation,
we should never try to distinguish these two cases.
This should have essentially no effect on code that's /not/ using
'fileprivate' other than altered diagnostics.
Progress on SE-0025 ('fileprivate' and 'private')
My earlier patch started serializing SIL basic blocks using the RPOT order. While it works, changing the existing order of BBs during the serialization may be very surprising for users. After all, serialization is not supposed to transform the code.
Therefore, this patch follows a different approach. It uses the existing order of BBs during the serialization. When it deserializes/parses SIL and detects a use of an opened archetype before its definition, it basically introduced a forward definition of this opened archetype. Later on, when the actual definition of the opened archetype is found, it replaces the forward definition. There is a correctness check at the end of a SIL function deserialization, which verifies that there are no forward definitions of opened archetypes left unresolved.
My earlier patch started serializing SIL basic blocks using the RPOT order. While it works, changing the existing order of BBs during the serialization may be very surprising for users. After all, serialization is not supposed to transform the code.
Therefore, this patch follows a different approach. It uses the existing order of BBs during the serialization. When it deserializes SIL and detects a use of an opened archetype before its definition, it basically introduced a forward definition of this opened archetype. Later on, when the actual definition of the opened archetype is found, it replaces the forward definition. There is a correctness check at the end of a SIL function deserialization, which verifies that there are no forward definitions of opened archetypes left unresoved.
In Swift, default arguments are associated with a function or
initializer's declaration---not with its type. This was not always the
case, and TupleType's ability to store a default argument kind is a
messy holdover from those dark times.
Eliminate the default argument kind from TupleType, which involves
migrating a few more clients over to declaration-centric handling of
default arguments. Doing so is usually a bug-fix anyway: without the
declaration, one didn't really have
The SILGen test changes are due to a name-mangling fix that fell out
of this change: a tuple type is mangled differently than a non-tuple
type, and having a default argument would make the parameter list of a
single-parameter function into a tuple type. Hence,
func foo(x: Int = 5)
would get a different mangling from
func foo(x: Int)
even though we didn't actually allow overloading.
Fixes rdar://problem/24016341, and helps us along the way to SE-0111
(removing the significance of argument labels) because argument labels
are also declaration-centric, and need the same information.
Strict aliasing only applies to memory operations that use strict
addresses. The optimizer needs to be aware of this flag. Uses of raw
addresses should not have their address substituted with a strict
address.
Also add Builtin.LoadRaw which will be used by raw pointer loads.
Serialize SIL basic blocks in the RPOT order to make sure that instructions defining open archetypes are serialized before instructions using those opened archetypes.
Previously getInterfaceType() would punt to getType() if no
interface type was set. This patch changes getInterfaceType()
to assert if no interface type is set, and updates various
places to set the interface type explicitly.
This brings us a step closer to removing PolymorphicFunctionType.
This flag tracks whether we have a special kind of imported class
that has limitations in what you can do with it. Currently it's
used for two things: CF classes, and the magic "Protocol" class used
to represent Objective-C protocol metadata. I'm planning to add a
third to handle classes with the recently-added objc_runtime_visible
attribute, which describes an Objective-C class whose runtime symbols
are hidden (forcibly preventing categories and subclassing). This is
used for some of the types in Dispatch, which has exposed some of the
classes that were considered implementation details on past OSs.
I'm splitting the flag into an enum rather than just marking the
Dispatch classes with the existing flag because we still need to
be able to /cast/ to the Dispatch types (which you can't do with CF
types today) and because they deserve better than to be lumped in
with CF for diagnostic purposes.
Groundwork for rdar://problem/26850367, which is that Swift will
happily let you extend the new Dispatch classes but then fails to find
the symbols at link-time.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
The next patch creates a situation where we serialize a reference
to a TypeAliasDecl's GenericParamTypeDecl, which references the
inner DeclContext of the TypeAliasDecl itself. This was not being
deserialized properly, triggering assertions.
Till now there was no way in SIL to explicitly express a dependency of an instruction on any opened archetypes used by it. This was a cause of many errors and correctness issues. In many cases the code was moved around without taking into account these dependencies, which resulted in breaking the invariant that any uses of an opened archetype should be dominated by the definition of this archetype.
This patch does the following:
- Map opened archetypes to the instructions defining them, i.e. to open_existential instructions.
- Introduce a helper class SILOpenedArchetypesTracker for creating and maintaining such mappings.
- Introduce a helper class SILOpenedArchetypesState for providing a read-only API for looking up available opened archetypes.
- Each SIL instruction which uses an opened archetype as a type gets an additional opened archetype operand representing a dependency of the instruction on this archetype. These opened archetypes operands are an in-memory representation. They are not serialized. Instead, they are re-constructed when reading binary or textual SIL files.
- SILVerifier was extended to conduct more thorough checks related to the usage of opened archetypes.
As a first step to allowing the build script to build *only*
static library versions of the stdlib, change `add_swift_library`
such that callers must pass in `SHARED`, `STATIC`, or `OBJECT_LIBRARY`.
Ideally, only these flags would be used to determine whether to
build shared, static, or object libraries, but that is not currently
the case -- `add_swift_library` also checks whether the library
`IS_STDLIB` before performing certain additional actions. This will be
cleaned up in a future commit.
Now that ObjC types can be generic, we need to satisfy the type system by plumbing pseudogeneric parameters through func-to-block invocation thunks. Fixes rdar://problem/26524763.
not have access to their type arguments at runtime. Use this to
fix the emission of native thunks for imported ObjC-generic
initializers, since they may need to perform bridging.
For now, pseudo-genericity is all-or-nothing, but we may want to
make it apply only to certain type arguments.
Also, clean up some code that was using dead mangling nodes.
I originally added this so that we would keep the signature around
even if type checking failed, and the function was given an
ErrorType.
Add a formal check to the AST verifier for this, and set the signature
in a few places where it wasn't being set.
Note that since we only serialize valid declarations, we don't have
to serialize a reference to the generic signature separately, but we
do have to remember to set it when deserializing, which wasn't being
done for destructors.
