Only declarations of whitelisted pre-specializations from with public linkage need
to be serialized as they will be used by UsePrespecializations pass during -Onone
compilations to check for availability of concrete pre-specializations.
The bodies of these functions are not required as they cannot be used anyways,
because they may refer to symbols with non-public linkage.
These APIs are useful e.g. for quickly finding pre-specialisations by their names.
The existence check is very light-weight and does not try to deserialize bodies of SIL functions.
This ireapplies commit 255c52de9f.
Original commit message:
Serialize debug scope and location info in the SIL assembler language.
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
At the moment it is only possible to test the effects that SIL
optimization passes have on debug information by observing the
effects of a full .swift -> LLVM IR compilation. This change enable us
to write targeted testcases for single SIL optimization passes.
The new syntax is as follows:
sil-scope-ref ::= 'scope' [0-9]+
sil-scope ::= 'sil_scope' [0-9]+ '{'
sil-loc
'parent' scope-parent
('inlined_at' sil-scope-ref )?
'}'
scope-parent ::= sil-function-name ':' sil-type
scope-parent ::= sil-scope-ref
sil-loc ::= 'loc' string-literal ':' [0-9]+ ':' [0-9]+
Each instruction may have a debug location and a SIL scope reference
at the end. Debug locations consist of a filename, a line number, and
a column number. If the debug location is omitted, it defaults to the
location in the SIL source file. SIL scopes describe the position
inside the lexical scope structure that the Swift expression a SIL
instruction was generated from had originally. SIL scopes also hold
inlining information.
<rdar://problem/22706994>
Pre-specializations were only used by Onone builds, but were kept inside the standard library dylyb anyways. This commit moves all the pre-specializations into a dedicated Swift module and a dynamic library, which are only used by Onone builds.
This reduces the code size of libswiftCore.dylib by 5%.
Fix some interface type/context type confusion in the AST synthesis from the previous patch, add a unique private mangling for behavior protocol conformances, and set up SILGen to emit the conformances when property declarations with behaviors are visited. Disable synthesis of the struct memberwise initializer if any instance properties use behaviors; codegen will need to be redesigned here.
The overhead of uniquing the locations in a Densemap isn't worth any of
the potential memory savings: While this adds an extra pointer and
unsigned to each SILInstruction, any extra memory is completely lost in
the noise (measured on a release -emit-ir build of the x86_64 stdlib).
This is not too surpising as the ratio between SILInstructions and unique
SILLocations is not very high and the DenseMap also needs space.
<rdar://problem/22706994>
remove the mixed concept that was SILFileLocation.
Also add support for a third type of underlying storage that will be used
for deserialized debug lcoations from textual SIL.
NFC
<rdar://problem/22706994>
Similarly to how we've always handled parameter types, we
now recursively expand tuples in result types and separately
determine a result convention for each result.
The most important code-generation change here is that
indirect results are now returned separately from each
other and from any direct results. It is generally far
better, when receiving an indirect result, to receive it
as an independent result; the caller is much more likely
to be able to directly receive the result in the address
they want to initialize, rather than having to receive it
in temporary memory and then copy parts of it into the
target.
The most important conceptual change here that clients and
producers of SIL must be aware of is the new distinction
between a SILFunctionType's *parameters* and its *argument
list*. The former is just the formal parameters, derived
purely from the parameter types of the original function;
indirect results are no longer in this list. The latter
includes the indirect result arguments; as always, all
the indirect results strictly precede the parameters.
Apply instructions and entry block arguments follow the
argument list, not the parameter list.
A relatively minor change is that there can now be multiple
direct results, each with its own result convention.
This is a minor change because I've chosen to leave
return instructions as taking a single operand and
apply instructions as producing a single result; when
the type describes multiple results, they are implicitly
bound up in a tuple. It might make sense to split these
up and allow e.g. return instructions to take a list
of operands; however, it's not clear what to do on the
caller side, and this would be a major change that can
be separated out from this already over-large patch.
Unsurprisingly, the most invasive changes here are in
SILGen; this requires substantial reworking of both call
emission and reabstraction. It also proved important
to switch several SILGen operations over to work with
RValue instead of ManagedValue, since otherwise they
would be forced to spuriously "implode" buffers.
This is effectively fallout from 36a44cf3 where we switched representations of DeclID
and friends, but when I went to add ++ and -- to llvm::PointerEmbeddedInt I realized
it wasn't really intended to be mutated in place, i.e. it doesn't make sense to
increment a DeclID. Represent counters as plain integers instead that get converted
to DeclID when they are first used.
...because "build configuration" is already the name of an Xcode feature.
- '#if' et al are "conditional compilation directives".
- The condition is a "conditional compilation expression", or just
"condition" if it's obvious.
- The predicates are "platform conditions" (including 'swift(>=...)')
- The options set with -D are "custom conditional compilation flags".
(Thanks, Kevin!)
I left "IfConfigDecl" as is, as well as SourceKit's various "BuildConfig"
settings because some of them are part of the SourceKit request format.
We can change these in follow-up commits, or not.
rdar://problem/19812930
There's a group of methods in `DeclContext` with names that start with *is*,
such as `isClassOrClassExtensionContext()`. These names suggests a boolean
return value, while the methods actually return a type declaration. This
patch replaces the *is* prefix with *getAs* to better reflect their interface.
The two types are nearly identical, and Fixnum is only in the Swift branches of LLVM,
not in mainline LLVM.
I do want to add ++ to PointerEmbeddedInt and fix some of this ugliness, but that'll
have to go through LLVM review, so it might take a bit.
Use the isScoped() bit to distinguish scoped imports from submodule
imports (both of which are split by null bytes in the string) so that we
don't try to lookup a submodule name as if it were a decl (leading to
assertion failures when it wasn't found).
This fixes interface generation of swift modules that import clang
submodules.
rdar://problem/24534122
Introduce Fix-Its to aid migration from selectors spelled as string
literals ("foo:bar:", which is deprecated), as well as from
construction of Selector instances from string literals
(Selector("foo:bar"), which is still acceptable but not recommended),
to the #selector syntax. Jump through some hoops to disambiguate
method references if there are overloads:
fixits.swift:51:7: warning: use of string literal for Objective-C
selectors is deprecated; use '#selector' instead
_ = "overloadedWithInt:" as Selector
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#selector(Bar.overloaded(_:) as (Bar) -> (Int) -> ())
In the cases where we cannot provide a Fix-It to a #selector
expression, we wrap the string literal in a Selector(...) construction
to suppress the deprecation warning. These are also easily searchable
in the code base.
This also means we're doing more validation of the string literals
that go into Selector, i.e., that they are well-formed selectors and
that we know about some method that is @objc and has that
selector. We'll warn if either is untrue.
As part of SE-0022, introduce an 'objc_selector' encoding for string
literals that places the UTF-8 string literal into the appropriate
segment for uniquing of Objective-C selector names.
